空间遥感器电控箱结构设计

空间遥感器电控箱的在轨不可维修性要求其具有高的电磁屏蔽能力和力学稳定性。针对电磁屏蔽能力和力学稳定性要求,设计了一种框架式结构的双腔隔离电磁屏蔽结构。该结构主体采用稳定的框架式结构,力学性能好。电控箱整体结构分为两个封闭的腔体,一个腔体用来承载电子学器件,一个腔体负责数据信号的转出,具有极高的电磁屏蔽能力。通过反应电控箱结构屏蔽能力的电场辐射抗扰度试验（RS103）和电场辐射发射试验（RE102）证明了该结构的电磁屏蔽效果满足航天应用需求。并且,对整个结构进行了有限元分析和动力学试验,基频是235HZ,满足设计要求的120HZ,双腔隔离电控箱具有优良的力学性能和极高的电磁屏蔽能力。     

某机载雷达发射校正系统的EMC设计

因受载机平台内电子设备电磁干扰的影响,某机载雷达发射校正时存在通道相位漂移的现象,表现为同一通道相位多次测量偏差超过正常幅度值.在阐述发射校正系统工作原理的基础上,深入分析干扰的来源和机理,提出了综合运用屏蔽、接地、滤波等措施解决电磁兼容问题的具体方法,实现了雷达发射校正系统的可靠工作,为该类工程设计提供了参考.     

基于FIT的外壳开孔屏蔽性能仿真计算

针对电气产品中的屏蔽问题,使用时域有限积分算法,对电气电子产品的机箱外壳开孔问题作了电磁场仿真,适用于辐射电磁干扰典型的频段30 MHz~1 GHz,计算并比较其屏蔽效能.仿真计算的结果表明,在相同面积、不同形状的开孔情况下,电场屏蔽效能和磁场屏蔽效能的特性,为设计电磁兼容屏蔽提供了帮助.     

Thermal,mechanical and γ-ray shielding properties of micro- and nano-Ta2O5 loaded DGEBA epoxy resin composites

In this work, we have investigated the synergistic effect of micro- and nano-Ta₂O₅ fillers in the epoxy matrix on the thermal, mechanical, and radioprotective properties of the composites. Morphological analysis revealed uniform dispersion of fillers in the matrix. Both the thermal stability and tensile properties of matrices have enhanced in the presence of fillers. Although the nanocomposites showed significantly higher tensile strength and Youngs modulus compared to micro-composites, the enhancement in these properties was predominant at low loadings. Dynamic mechanical analysis indicated good interfacial adhesion and positive reinforcing effect on the matrix even at higher loading (30 wt%) of nano-Ta₂O₅. γ-Ray attenuation studies performed in the energy range of 0.356–1.332 MeV revealed better γ-ray shielding ability of nanocomposites compared to microcomposites at same weight fraction of fillers. In particular, γ-ray attenuation at 0.356 MeV for 30 wt% nano-Ta₂O₅ loaded epoxy composite was enhanced by around 13% compared to the microcomposite at the same loading. Increased surface-to-volume ratio of nanofillers and consequent increase in matrix-filler adhesion and radiation-matter interaction have manifested in an overall enhancement in the thermal, mechanical, dynamic mechanical, and radiation shielding characteristics of nano-Ta₂O₅/epoxy composites, proving them as promising γ-ray shields.     

焊机电源的噪声干扰源分析及抑制措施(二)

较详细地分析了焊机电源产生干扰的内部和外部原因，通过对干扰的3种传导方式分析．提出了抑制干扰源具体措施和应注意的问题。     

电磁波层析成像反演射线路径的探讨

在电磁波 CT 测试中,发射、接收探头间的电磁波射线发射点、接收点位置决定反演后成果数据记录点的位置。为了确定电磁波仪发射、接收探头记录点位置,对探头分别进行钢管屏蔽实验,实验表明电磁波仪工作时电磁波能量主要集中在两探头的馈电点及天线末端间近似于平行四边形的区域内,不宜直接地简化为一条直线,将平行四边形区域简化为4条线段进行电磁波层析成像反演计算更符合实际情况。在此基础上,提出对电磁波 CT 数据采取4条射线路径单独反演后,再将4个结果按综合平均的方法进行处理。将此种处理方法应用于武汉地铁岩溶勘察数据处理中,并与目前基于1条射线的反演处理方法进行对比、验证。对比剖面反演数据结果表明,在采用同一反演软件条件下4条射线路径综合反演法精度优于1条射线反演法。     

DCS信号电缆的屏蔽接地探讨

某电厂机组调试间发生一次六大风机振动信号全部瞬间跳变导致六大风机跳闸引起机组MFT,经检查是由于风机振动控制拒的接地不合理引起,处理好接地后振动信号正常后未发生跳变情况,文章分析了产生干扰信号的原因及抑制方法。     

混波室法电缆屏蔽性能测试分析

混波室测试的低成本、高动态范围、高上限频率等特点,使之在电缆屏蔽效能测试中应用日益广泛。通过实验分析电缆长度、电缆放置位置与方向对混波室法屏蔽效能测试的影响,结果表明这些因素不影响混波室法屏蔽效能测试值,体现了电缆屏蔽效能混波室法测试的鲁棒性。     

A study on improving shielding performance of shielded cable

With the developments in power electronics equipment, the electromagnetic environment has become severe for electronic equipment. In the smart facility field, the stable operation of electronic devices is indispensable, and noise countermeasures must be improved. To suppress intrusive noise from cables, shielded cables are used in many cases. However, electromagnetic induction cannot be suppressed when the shield is grounded at one end, and when grounding both ends of the shield, current flows through the shield creating intrusive noise in the cable. That is, even if a shielded cable is used, a sufficient effect cannot be obtained. Therefore, as a countermeasure, this study prototypes and evaluates cables that combine double shielded cables with magnetic cores. Evaluations conducted using the copper pipe method, triaxial method, and impulse test confirm that the shielded performance improved by 10–30 dB compared with the conventional shielded cable.