Al2O3—TiB2陶瓷刀具材料的高温氧化及其对刀具耐磨性能的影响

研究了Ａｌ２Ｏ３－ＴｉＢ２陶瓷刀具材料在１０００℃下的氧化行为，用ＸＲＤ、ＳＥＭ分析了氧化后的相组成及显微结构。结果表明：Ａｌ２Ｏ３－ＴｉＢ２陶瓷材料在１０００℃空气中氧化增重符合抛物线规律；随ＴｉＢ２含量的增加，该材料的抗氧化能力下降。     

MIM隧道结的电子输运特性和发光研究

论述作为一种新型发光器件的ＭＩＭ隧道结的发光机理，报告了该器件的发光现象和Ｉ－Ｖ特性曲线中负阻现象的实验观察。数据显示，结中表面等离极化激元（ＳＰＰ）与粗糙度的耦合是引起光发射的主要方面，ＳＰＰ对隧穿电子的阻塞作用导致了电子输运中的负阻现象。此外，还观察到了直接辐射的紫外峰。     

几种火焰喷焊自熔性合金层的耐磨性能

研究了不同自熔性合金粉末火焰喷焊层的显微组织与抗磨粒磨损性能，并对其磨面形貌进行了ＳＥＭ观察分析。结果表明，在Ｎｉ６０自熔性合金中加入适量的镍包ＷＣ粉末可明显提高其喷焊层的抗磨粒磨损性能。当ＷＣ的加入量为３５％（ｗｔ）左右时，该喷焊层与６０Ｓｉ２Ｍｎ调质钢相比，相对的耐磨性可提高６倍以上。     

Antimicrobial resistance and R-factor transfer of salmonellae isolated from chicken carcasses in Greek hospitals

A total of 62 salmonellae, belonging to six different serotypes, were isolated from 60 out of 87 (69.0%) chicken carcasses delivered to hospitals of Thesssaloniki, Greece. Salmonella enteritidis, Salmonella anatum and Salmonella bredeney were the most prevalent serovars. Isolates were examined for antibiotic resistance patterns and R-determinants. Resistance to at least one antibiotic was observed in 36 (58.1%) of them and 18 different resistant profiles were recorded. Nitrofurantoin-resistance was the most common (29.0%), followed by spectinomycin (21.0%), ampicillin (19.4%) and ticarcillin (19.4%). Fourteen (38.9%) of the resistant isolates possessed R-factors and resistance to ampicillin, ticarcillin, trimethoprim and kanamycin was easily self-transferable. However, nitrofurantoin- and spectinomycin-resistance although prevailing, was not found transferable even after mobilization. The high incidence of antibiotic resistant salmonellae among chicken carcasses in our hospital setting suggests the need for public health interventions and possible withdrawal of drug selective pressure.     

碳钢与不锈钢表面高浓度渗铬法

在氩气气氛下，应用固体渗铬填料法对碳钢、不锈钢作了表面高铬浓度的渗铬处理，探讨了渗铬温度、时间和渗铬组分对渗层表面铬含量、厚度，试样增重和物相组分影响，碳钢、不锈钢的表面渗铬浓度分别达８０－９４ｗｔ％和７０－８２ｗｔ％。     

Development of temperature compensated high elongation resistance strain gauges for use up to 250°C

The paper describes the development and evaluation of temperature compensated high elongation resistance strain gauges for use from room temperature to 250°C. These gauges could be temperature-compensated on steels with coefficient of thermal expansion α = 11 ppm/°C. Thermal output within 250°C was about 1 μm/m/°C and maximum standard deviation of 5 gauges was 34 μm/m. Strain limit was > 4% at room temperature and at 250°C. Gauge factors of different strain ranges at R.T. and at 250°C are tabulated. Some applications are stated.     

采用ZnO灭磁时阀片均流/均能的探讨

从ZnO电阻的非线性特性出发,对采用ZnO作为灭磁电阻时阀片的均流/均能进行理论论述,指出阀片均能性能的好坏主要依赖于阀片自身的特性;分析比较了ZnO阀片的不同选择方法对均流/均能的影响,指出阀片的均流/均能很大程度上取决于可供选择的阀片的库存量.该研究为发电机励磁系统的安全稳定运行提供了有力的保证.     

Distribution and Fate of Escherichia coli in Lake Michigan Following Contamination with Urban Stormwater and Combined Sewer Overflows

Escherichia coli distribution and persistence in nearshore Lake Michigan were assessed following heavy rains and sanitary sewer overflow (SSO) and combined sewer overflow (CSO) events over a 5-year period, including an 18-day period following 25.4 cm of rainfall in which intensive studies were conducted following multiple CSO and SSO events. E. coli levels in the Milwaukee estuary and harbor following SSO and CSO events ranged from 10⁴ to nearly 10⁵ CFU/100 mL, which were significantly higher (p ≤ 0.05) than levels following rainfall alone. Sites outside of the breakwall but within the contamination plume (e.g., within 2 km of the harbor) were an order of magnitude lower. Locations 2–5 km from the harbor ranged from below detection limits, of < 1 to 5 CFU/100 mL. E. coli levels corrected for dilution based on specific conductivity measurements were lower than what would be expected for loss due to dilution alone, suggesting a combination of die-off and dilution, were responsible for the rapid disappearance of these organisms outside of the harbor. E. coli and fecal coliforms measured concurrently demonstrated that fecal coliforms could be recovered longer than E. coli in the open waters of the lake. E. coli isolated directly from sewage treatment plant influent were found to have a marked increase in antibiotic resistance traits for ten antibiotics commonly used in the human population compared with isolates from two animal sources of fecal pollution. However, E. coli obtained from sewage impacted water (n = 2,513) and from stormwater impacted water (n = 1,465) collected the previous year when there were no sewage overflows, were found to have no significant difference (p < 0.05) in the frequency of resistance when comparing the two conditions. E. coli survival characteristics and population dynamics are most likely influenced by multiple factors in complex systems such as the watershed/estuarine/lake environments of the Great Lakes.     

S—135钢板热轧工艺研究

S—135钢板是水电站用高强耐磨不锈钢板,既要求强度高、韧性好,又要求耐磨、耐蚀性强,生产难度较大。除我厂外,目前国内尚无其它厂家能够生产这种钢板。该钢板在加热轧制,冷却过程中要解决很多技术难点。我们通过采用特殊的控制轧制和控制冷却工艺,很好地解决了诸多技术难点,使S—135钢板的开发研制取得了成功。为电站用高强度耐磨不锈钢生产提供了宝贵的经验,也为控制轧制及控制冷却技术在中板生产行业的应用起到了积极的推动作用。     

用于疏通油水井的脉冲放电技术

评价了各种不同的解堵技术，指出冲击波解堵是一种很有发展前途的技术。介绍了液中脉冲放电产生冲击波的基本原理，并由此研制出了一套井下脉冲放电油水井处理设备样机。通过现场试验，表明用冲击波疏通油井能较好地解除油井污染，提高采收率。