舰船用断路器抗冲击欠压脱扣器的设计

对断路器的欠压脱扣器结构进行分析和研究 ,采用平衡机构、弹性球效应等抗冲击设计方法 ,并通过理论计算和验证 ,将H—DW14舰船用断路器的欠压脱扣器设计成具有抗冲击能力的产品 ,以适应舰船的要求。     

固定网综合信息平台的建设

详细介绍了中兴ZXF118固定网综合业务信息平台的结构、建设方案及其组网方案。     

Analytical investigations of transitional operating modes of the second circuit of units at NPP with water-moderated reactors with consideration of control systems

A mathematical model for analysis of process parameters of equipment in the second circuit of nuclear power plants is presented, and the structure of the program and principles used for analysis of the equipment are described. A mathematical model for analysis of the deaerator and steam generator is described in detail. A computational analysis of several transitional modes, which is made possible on the basis of the mathematical model in question, is also presented in this paper, and a comparison is made with test data. __________ Translated from élektricheskie Stantsii, No. 3, March 2007, pp. 16–22.     

双接触器型三相异步电动机Y-△降压启动电路

提出并试验了一种使用2个接触器的三相异步电动机Y-△降压启动电路,该Y-△降压启动电路比传统电路节省1个接触器。试验结果表明其可以应用于老设备维修改造和新设备设计中。     

Characteristics and classification of high-current fault arcs on distribution systems

When a fault occurs on transmission or distribution systems due to lightning or overvoltage, often an arc discharge occurs at the fault point. The arc discharge, which is caused by a fault current, has a high current, high temperature, strong light emission, etc., thus it sometimes causes heavy damages to electric power equipment. The arc discharge is influenced by the conditions around the arcs, i.e., gas, insulation materials, gap length, weather, etc. Also, the arc voltage along the arc column indicates the characteristics of the arc. If the voltage waveforms of the arcs caused by the fault on transmission or distribution systems are classified, it is possible to find the location and the equipment where the fault occurred. In this paper, the arc voltage data in 6-kV class XLPE cables and 6-kV class overhead lines are analyzed and an artificial neural network method is applied to classify the arc voltage waveforms. The results obtained from the six artificial neural networks developed show that the artificial neural network method is effective for classification of arc voltage waveforms if adequate input parameters are selected.     

红外焦平面探测器的输入电路性能分析

在混合式红外焦平面阵列中，探测器和读出电路之间的耦合是通过输入电路完成的。本文论述了输入电路在焦平面传输中的作用，分析了焦平面输入电路的性能，讨论了焦平面输入电路对红外焦平面阵列探测器设计的影响。     

厚度伸缩压电陶瓷振子

对厚度伸缩压电陶瓷振子的振动状态进行了分析,并得到其等效电路.推导了振子的谐振频率、反谐振频率以及等效电路参数与振子尺寸、振子材料的介电、压电、弹性常数间的关系式.最后讨论了振子的一些特性和制作.     

新型高性能脉冲峰值保持电路

本文介绍了两种新型跨导型脉冲峰值保持器，分别用于多丝正比室（ＭＷＰＣ）和复合晶体闪烁探测器（Ｐｈｏｓｗｉｃｈ）输出脉冲信号的形状和幅度分析。电路的跨导放大级采用跨导型集成运算放大器，使电路结构简单化，且性能优良可靠，能响应输入脉冲最小上升时间分别为５０ｎｓ（Ｐｈｏｓｗｉｃｈ）和５００ｎｓ（ＭＷＰＣ）的信号，在４０ｄＢ的动态范围内，两电路的积分非线性均好于０．１％，特别适用于空间γ射线观测。     

相变存储器存储单元瞬态电流测量

介绍了相变存储单元瞬态电流的测量方法。根据相变存储器的工作特性,利用微弱电流取样电阻测量法,合理选择测量参数测得了相变存储单元的瞬态电流,电阻与电流关系特性曲线和动态电阻。并根据测量电路等效电路模型分析影响测量的因素,估算出电路中的分布电容。     

一种基于类电磁机制算法的模拟电路故障诊断方法

针对模拟电路的特征,该文提出一种基于类电磁机制算法的模拟电路故障诊断方法,该方法首先利用小波包技术提取故障特征,然后将特征向量输入到采用类电磁机制算法优化的BP神经网络中,避免参数过早陷于局部最优,提高了神经网络的分类能力.通过具体实例验证了该算法的有效性.