自聚焦棒耦合性能的分析

本文采用光线光学的原理分析了自聚焦棒（ＧＲＩＮ）的光学性能，在折射率分布为抛物线近似的条件下，推导出较为简单的ＧＲＩＮ中的光线轨迹方程，并实验测量了ＧＲＩＮ的耦合效率，从而由理论和实验两方面讨论ＧＲＩＮ的聚焦特性。     

梯度折射率棒中传播的高斯光束轨迹解析解及其存在条件的讨论

本文提出光束轨迹方程的一般解，导出解析解的存在条件，推广了文献［１］的光线传播理论，文中以一特定梯度折射率棒为例，讨论了高斯光束在棒中的传播特性。     

黑土土壤质量演变初探I：不同开垦年限黑土主要质量指标演变规律

根据土壤质量的定义和研究方法 ,对黑土的主要质量指标演变规律进行初步研究。结果表明 :黑土的颗粒组成受开垦历史影响的程度较小 ,其质地没有发生显著变化 ;黑土的有机质、全氮、全硫和全磷随着黑土开垦时间的增加而不断降低 ;速效磷随黑土开垦时间的增加有增高的趋势。经过统计分析 ,黑土中粉砂(0.05～0.002mm)含量与细砂(0.25～0.05mm)和粘粒(<0.002mm)含量具有相关性,黑土有机质含量与全氮、全硫、全磷和速效钾具有明显的正相关。因此 ,初步认为黑土中粉粒和有机质含量可以作为土壤物理和养分方面的质量指标     

DCS的评价与选择

本文综述了ＤＣＳ（集散控制系统）三代产品的总体水平评价，介绍了ＤＣＳ的总体性能、评价指标和它的选择准则。     

Solar radiation climate in Malawi

Recently, Diabaté et al. [Diabaté, L., Blanc, Ph., Wald, L., 2004. Solar climate in Africa. Solar Energy 76, 733–744] created a map of solar radiation climate in Africa using clearness index for 62 sites. They established a solar climate class II located in Malawi and Madagascar. However, their analysis did not include any irradiation data from a site in Malawi. In this study, the solar radiation climate of Malawi has been studied using long-term global radiation data from a local site. The mean monthly (K_tm) and seasonal (K_ts) daily clearness indices for the site were computed. It is observed that K_tm has two maxima in a year (K_tm = 0.58 in May and K_tm = 0.64 in September), in close conformity with findings of Diabaté et al. (2004). Other results are presented and discussed.     

铀工业指标研究的几个问题

本文介绍在铀矿床工业指标制定中,对未来矿山开采设计方案及经济计算参数几千问题的分析,以利于合理的制定铀矿床工业指标,为铀矿冶企业技术改造,在建企业修改设计和为选择新建企业提供决策依据,进而使铀矿冶企业提高经济效益。     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

Structural reliability optimization using an efficient safety index calculation procedure

The objective of this paper is to conduct reliability-based structural optimization in a multidisciplinary environment. An efficient reliability analysis is developed by expanding the limit functions in terms of intermediate design variables. The design constraints are approximated using multivariate splines in searching for the optimum. The reduction in computational cost realized in safety index calculation and optimization are demonstrated through several structural problems. This paper presents safety index computation, analytical sensitivity analysis of reliability constraints and optimization using truss, frame and plate examples.     

激光探针监测半导体器件内自由载流子浓度调制效应

介绍了基于自由载流子对介质折射率调制作用,而建立的监测半导体器件内自由载流子变化情况的实验装置,该装置能实时反映自由载流子变化情况,且对原电路无任何影响。本方法适用于硅和砷化镓材料的电子和光电子器件,也显示了在测量集成电路内部有源器件特性方面的潜在应用前景。