德士古水煤浆气化的运行及改造

对德士古煤浆的制备和贮运、气化、闪蒸系统的长周期运行方面进行了改造,改造后系统的运行质量得到了改善和提高。     

石灰乳输送泵的失效分析与优化设计

结合某水泵厂提供的石灰乳输送泵的设计资料,根据试制的离心渣浆泵出现的失效现象,分析失效原因,研究改进方法,为低比转数离心渣浆泵的设计提出优化设计意见。     

美国能源部的浆态床F－T合成技术

浆态床Ｆ－Ｔ合成技术是美国能源部Ｆ－Ｔ合成技术的主要开发项目。本文就浆态相Ｆ－Ｔ合成催化剂的开发、中试示范实验和浆态反应器的化工基础研究作一扼要的介绍。     

New analysis of non-newtonian turbulent flowndashyield-power-law fluids

The writers' new analysis of non-Newtonian turbulent flow is extended to the yield-power-law model. As the value of the exponent of the yield-power law decreases from unity, the calculated friction factor begins by converging toward the Newtonian line at high velocity, then parallels it, and finally diverges downward. This prediction agrees with previously unexplained experimental results.     

泥磷回收制磷危险性分析与防治

泥磷回收制磷属于化学危险品生产,由于黄磷本身的易燃特性和生产中其他因素的诱导,极容易发生泄漏引发火灾和灼伤。介绍了泥磷的产生和泥磷回收制磷的工艺特点。应用系统安全工程的原理和方法,辨识了泥磷回收制磷生产的潜在危险性;辨识了泥磷回收制磷生产过程中的物质危险性、装置危险性和工艺危险性。运用预先危险性分析法（PHA）对泥磷回收制磷的主要危险、有害因素进行分类和分级。根据对主要危险、有害因素分类和分级的结果,提出技术措施和管理措施来提高企业安全生产管理水平和预防生产性事故的发生。     

堆场疏浚泥颗粒分选特性初步量化方法

为了准确评估堆场存储能力和合理选择疏浚泥处理工艺,以泥沙运动学为理论基础,将疏浚泥颗粒分为d0.005 mm、0.005 mm≤d≤0.01 mm和d0.01 mm 3个粒组,分析了各粒组相对含量的沿程变化规律,明确了堆场疏浚泥分选的主要原因是d0.01 mm粒组与0.005 mm≤d≤0.01 mm粒组的相对运动;以分选系数量化堆场疏浚泥分选的显著程度,以偏离系数量化原泥颗粒组成对堆场疏浚泥分选的影响,分析了分选系数、偏离系数分布与堆场疏浚泥土性分布的关系,提出了堆场疏浚泥分选特性的初步量化方法。研究结果表明:随着离吹填口距离的增大,分选系数沿程减小,呈幂函数分布,堆场疏浚泥分选性沿程减弱,吹填口附近分选系数最大,颗粒分选显著,粒度差异大,退水口附近分选系数趋近于零,分选不明显,颗粒分布均匀;偏离系数沿程先减小后增大,呈勺形分布,反映堆场前、后段疏浚泥土性与原泥相差较大,而堆场中段疏浚泥土性与原泥接近;分选系数、偏离系数的沿程分布与堆场疏浚泥土性分区具有良好的相关性。     

煤制合成气低温甲醇洗配管总结

本文根据以煤为原料的合成氨工艺装置中低温甲醇洗涤净化系统的特点，对其配管在工程设计时的一些特殊要求进行总结，供工程设计人员参考。     

Absorption of carbon dioxide in alkanolamines in the presence of fine activated carbon particles

The rates of absorption of CO₂ into water and 0.1 kmol/m³ aqueous solutions of MEA, DEA and AMP were measured in a stirred cell with a flat gas-liquid interface in the presence of fine activated carbon particles. Experiments showed that the rates of absorption increased significantly with increases in the loading of activated carbon up to about 6 kg/m³ and thereafter remained constant.     

Effect of advanced chilling methods on lipid damage during sardine (Sardina pilchardus) storage

Slurry ice is a biphasic system consisting of small spherical ice crystals surrounded by seawater at subzero temperature. Its effect on lipid damage (hydrolysis and oxidation) was evaluated during the chilled storage of a fatty fish species, sardine (Sardina pilchardus). Slurry ice treatment was checked alone and in combination with ozone and compared to traditional flake icing during a 22‐day storage. Different lipid damage indices (free fatty acids, FFA; peroxide value, PV; thiobarbituric acid index, TBA‐i; fluorescent compounds, FR) were checked and compared to sensory assessment and nucleotide degradation (K value). According to lipid hydrolysis (FFA) and oxidation (PV and FR) developments, slurry ice showed an inhibitory effect (p <0.05) on lipid damage during storage, as well as an inhibition of nucleotide autolytic degradation. Ozonised slurry ice did not provide differences (p >0.05) from slurry ice alone when considering lipid hydrolysis, nucleotide degradation and some lipid oxidation indices (PV and FR), although a higher (p <0.05) TBA‐i was observed at day 22 of storage when compared to flake ice and slurry ice treatments. However, a lower (p <0.05) fluorescence development was observed for fish treated under ozonised slurry ice when compared to traditionally iced fish. Sensory assessment showed a higher shelf life for fish samples treated under ozonised slurry ice than for their counterparts under slurry ice (15 d versus 12 d), while flake icing led to a far shorter shelf life (5 d). According to sensory and biochemical (lipid matter and nucleotide) analysis, slurry ice has proved to be a promising technology for damage inhibition and quality retention in a fatty fish species such as sardine. Ozonised slurry ice was also shown to be useful, since a longer shelf life was obtained in the present experiment and a pro‐oxidant effect of ozone on sardine lipids was not proved.     

利用蓄电池废硫酸和硼泥制备高品质氢氧化镁

利用废铅酸蓄电池中的废硫酸作为浸取剂,对硼泥中的镁进行回收并制备出高品质的氢氧化镁产品。实验得出了酸浸硼泥的最佳工艺条件：酸浸温度为80℃;酸浸时间为30 min;酸用量为硫酸与硼泥质量比为1.2∶1。利用不同金属水解pH的不同,将酸浸过程中从硼泥和废硫酸中引入的杂质依次去除,得到精制硫酸镁溶液。由精制硫酸镁制取氢氧化镁的工艺条件为：常温下,沉淀剂为氨水,反应终点pH为11,反应时间为2 h,反应物在50℃下陈化12 h,过滤、洗涤后105℃烘干。实验考察了不同沉淀剂对氢氧化镁形貌的影响。所得氢氧化镁纯度在97%以上,粒径在0.1～1μm之间,各项指标均优于中国化工行业标准。