采用ZnO灭磁时阀片均流/均能的探讨

从ZnO电阻的非线性特性出发,对采用ZnO作为灭磁电阻时阀片的均流/均能进行理论论述,指出阀片均能性能的好坏主要依赖于阀片自身的特性;分析比较了ZnO阀片的不同选择方法对均流/均能的影响,指出阀片的均流/均能很大程度上取决于可供选择的阀片的库存量.该研究为发电机励磁系统的安全稳定运行提供了有力的保证.     

Stability of large-scale coal-fired MHD channels

Stability of large-scale coal-fired MHD channels is studied by (1) linearized stability analysis, and (2) time-dependent 1-D analysis. The channel length is 15 m with 600 electrode pairs, and the output power ranges from 220.6 MW through 258.7 MW. Linearized stability analyses show that the Faraday channels operated with fixed loading resistance are stable, whereas the two waves of u and u–a (u, a: gas and sound velocity) become unstable in the Faraday channel with fixed loading factor. Two waves of u and u–a are unstable in the diagonal channel with fixed loading current and the u + a wave becomes unstable in the diagonal channel with fixed electrode current. Time-dependent one-dimensional analyses indicate that the Faraday channels with fixed load resistance are smooth without growth of fluctuation. The diagonal channels with fixed electrode current are smooth with no fluctuation, though the linear theory indicates that the u + a wave is unstable. The diagonal channel with fixed load current suffers large disturbance along the latter half of the channel, being consistent with the linearized analysis which indicates that the u - a and u waves are unstable.     

计算机辅助技术在水轮机调节中的应用

将计算机辅助系统中的ＣＡＡ、ＣＡＤ、ＣＡＭ及ＣＡＴ等技术移植到水轮机调节系统中，以求在水轮机调节系统中建立一套科学的工程设计方法     

一种新的抖动调制方法

本文在脉冲延迟发生的基础上提供了一种用调相方法实现抖动调制的方案。该采用数字电路，与传统的调频方法比较具有易实现，精度高等优点，并为进一步开发出抖动测试集资打下了基础。     

大型透平式压缩机检修质量控制

介绍了6000空分制氧设备中大型透平式压缩机的检修过程中应着重注意的几个问题，主要检修项目的质量控制，以及检修技巧。     

三嗪类化合物的合成及其产酸性能研究

合成了一系列的三嗪类光生酸剂1a-1e，确定了它们的结构，并对1e在乙腈溶剂中365和405nm光下的曝光分解产酸性能进行了初步的定量研究．结果表明，在测定浓度范围内分解量子产率和产酸量子产率基本上都不随浓度的变化而变化，在405nm光下比在365nm光下有更高的分解和产酸量子效率．有关这类化合物的光生酸性能与曝光波长的关系正在进一步研究中．     

内燃机电站噪声控制

针对150kVA内燃机电站的噪声特点 ,应用噪声控制原理 ,对其进行了控制 ,取得了较好的效果     

汽轮机转子热应力在线计算灰色数学模型

热应力计算中边界条件、物性参数和初始条件等模型输入参数的灰色特性，使得以近似点值为输入得到的计算结果缺乏准确性依据和度量，该文提出的灰色数学模型，用区间数代替近似点值建立灰色数学模型，得出热应力在线计算值的灰色描述，可以更好地符合工程计算需要。文中针对模型应用的复杂程度，以汽轮机转子为对象，对单纯灰边界问题给出了简单的端点计算法及其依据；对复合灰边界灰物性问题建立了差分格式的数学模型，应用区间高斯迭代算法，结合模型结构特点推导了简易的基于内包含不等式的算法，并且给出两种算法的数值算例对比。     

联合循环机组汽封系统的设计改进

介绍了联合循环汽轮机原汽封系统存在的问题以及改进后汽封系统的工作原理和运行控制过程。     

Heat loss and thermoelectric generator design

With the object of evaluating its importance to thermoelectric generator design, heat loss is introduced into the standard thermoelectric generator design theory. The theory for both the constant hot and cold junction temperatures model and the constant heat input model are so modified. The modification is first order and, therefore, is limited to small leg heat-transfer coefficients. Numerical results using representative properties show that significant differences can exist between the optimum geometry and performance of a generator idealized as lossless and those of a generator designed by the modified theory. The largest differences occur with the constant heat input model.