激光晶体的新发展

本文根据最新资料对固体激光器所用激光晶体的近期发展作了详尽综述，并对我国应如何发展激光晶体研究提出建议。     

Menke条件下甲苯的固体酸催化选择性硝化

在Ｍｅｎｋｅ条件下，固体酸能对硝酸盐硝化甲苯的位置选择性产生影响，在所选的几种固体酸中皂土和高岭土是较好的对位选择性硝化催化剂，能使硝化产物的对邻比率达１．１～１．５。     

固体推进剂中有关粒度分布的数学处理

介绍了固体推进剂中有关颗粒度分布的数学处理方法，用几种数据统计分析的理论分布函数－正态分布，对数－正态分布，Ｋ分布，并以铝粉和含铝推进剂燃烧残渣的颗粒分布为例进行了分析，根据Ｃｕｌｉｃｋ微粒阻尼的理论计算模型，讨论了粒度分析在阻尼效应计算中的应用。     

Effect of Forming Pressure on the Internal Structure of Alumina Green Bodies Examined with Immersion Liquid Technique

Green bodies prepared by compaction of alumina granules were made transparent by an immersion liquid technique, and the internal structure was characterized with an optical microscope to study the effect of forming pressure on the internal structure. Clear images obtained by the technique provide more detailed information than other existing methods for structures ranging from one to tens of micrometers. Intergranular pores were present between unfractured granules. Their sizes and concentration tended to decrease with increasing forming pressure. However, pores were clearly present even in the green body prepared at 600 MPa. A rod- and needlelike feature was also found and was concluded to correspond to a high-density region. The significance of large pores and high-density regions on processing as well as the details of the technique is discussed.     

二维金属凹槽填充各向异性介质时散射的边界元方法:TE情形

由各向异性介质无界空间Green函数和Green恒等式出发，推导了TE波入射时二维任意截面金属凹槽填充各向异性介质时所满足的边界积分方程，并用边界元法和广义网络原理计算了金属凹槽填充各向异性介质时的散射。用文中方法退化计算了凹槽填充各向同性介质时的散射，计算结果与解析结果一致。并给出了凹槽填充各向异性介质时的散射算例。     

FEATURE SOLID MODELING TOOL SYSTEM:FSMTS

In conformity with the principle of Design for Manufacture,feature-based design strate-(?)es have been developed.As the“feature”is relevant to the“macro process plan”and“macro NCprograms”,obviously,“feature”is beyond the power of conventional solid modellers.Neverthe-less,substantial breakthrough has not been made in the solid modeling field,except“feature at-taching”or“feature recognizing”methods have been taken on.In this paper,the theory,concepts,system architecture,and algorithm principles of solid modeling tool system have beenrepresented.The practice of Feature Solid Modeling Tool System (FSMTS) developed atHuazhong University has proved that the tool may be a new foundation of Feature-Based Design.     

圆锥形零件冲压变形与成形载荷的分析

由于悬空侧壁部分的变形状态是圆锥形零件成形的关键，而径向拉应力是实现悬空部分成形的必要条件，同时也是该部分冲压成形成败的关键为此，经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式。同时分析了圆锥形零件的成形载荷。     

热等静压技术的发展及应用

在介绍热等静压技术和设备发展的基础上，对其在提高铸件质量以及拓展高速钢、双炼钢和超级双炼钢、高性能陶瓷等新型材料应用领域方面的作用，进行了较全面的阐述。并预计，因热等静压技术所具有的优势，在今后几年其应用增长可达到每年递增15％-20％的水平，且随着其在铝加工工艺中应用的拓展，年增长率可望达到25％。     

波在PTL介质中传播的旅行时反演

本文对Byun(1990)的横向各向同性介质的旅行时反演方法作了两点改进:其一是根据优化后的V_r值计算一个初始的F值,然后再根据这个初始值进行最小均方误差分析;其二是对初始值进行优化分析时,提出用测量值(或由式(4)和式(10)计算的理论值)作为实际值进行拟合,而Byun的方法是用式(11)的计算来得到一个实际值。理论模型证明:本文所述方法有一个比较宽的适应性,而Byun方法只在弱各向异性时才可以得到较精确的结果。     

A thermochemical concept-based equation to estimate waste combustion enthalpy from elemental composition

Waste combustion is an interesting alternative for waste management and energy recovery. Knowledge of the waste higher heating value (HHV) is important for judging it’s worth as fuel. This work introduces a new equation, based on thermochemical concepts, to calculate HHV from elemental composition. This equation is expressed in terms of mass percentages on a dry basis of carbon (%C), hydrogen (%H), oxygen (%O), nitrogen (%N), and sulfur (%S); the HHV is computed in MJ/kg. The equation is as follows: HHV=(1−(%H₂O/100))(−0.3708(%C)−1.1124(%H)+0.1391(%O)−0.3178(%N)−0.1391(%S)). The thermochemical concept on which this expression is based involves a wide applicability. This equation neglects the inorganic carbon, hence it is not very adequate when there is a significant concentration of it. The predictions from this approach were contrasted against those proceeding from equations currently used in combustion technology, and also against bomb calorimeter data. The new equation is clearly competitive with respect to other formulations, and it can be very helpful for presenting a waste HHV value based on different derivation suppositions.