TC4合金锥体模锻过程的数值模拟

采用刚塑性有限元法对钛合金锥体的模锻成形进行有限元数值模拟,分析了锥形件模锻过程中的金属流动规律,应力场、应变场、变形区的压力分布,压力的变化规律等。模拟结果表明,锥体模锻成形分为3个阶段:初期变形过程是圆柱体变形为一个小曲率壳体的阶段,应力主要集中在上模的正下方,应变主要发生在此变形区;变形中期是与下模相接触的部分参与变形的体积逐渐增大,直至最后形成所需要的锥体形状;变形后期由于摩擦作用产生严重的不均匀壁厚减薄现象。     

Automation, work organization and skills: The case of numerical control

This paper deals with small and medium sized firms. Since the late seventies small and medium sized mechanical engineering firms in France have resorted increasingly to new technologies, and in particular to numerical control. Numerical control has introduced major changes in work organization. On the one hand it tends to reinforce the role of methods of production engineering whatever the type of numerical control may be. Programming is seldom left to the machine operators, except in the case of straightforward machining operations or in machining shops with a strong tradition of highly skilled or artisan labour. Numerical control, on the other hand, does provide more opportunity for collaboration between the workshop and the production engineers. On a workshop level it introduces a more mobile division of labour between programmers, machine setters and operators, which covers everything from the start-up of programs to the supervision of maching operations. The operator may therefore acquire new skills, but this is only possible if there are open-ended training systems available to facilitate the transmission of know-how from the programmers to the machine setters and from the machine setters to the operators, and vice versa. Small and medium sized firms would appear to have a special role to play in developing skills.     

中温SOFC密封玻璃热稳定性研究

研究了一种热稳定性好的中温固体氧化物燃料电池密封玻璃. 研究表明, 此密封玻璃的热膨胀系数(室温～631℃)为9.8×10^-6/K, 与8YSZ电解质的热膨胀系数10.0×10^-6/K(室温～631℃)接近, 并且在700℃热处理300h后, 该密封玻璃的热膨胀系数几乎没有变化. 粘度实验表明, 玻璃在700℃下具有足够的刚性, 适合于运行温度在700℃左右SOFC的密封. 化学相容性的研究显示, 在700℃下与8YSZ反应300h后没有发现显著的界面反应.     

尖晶石相型LiM_(0.2)Mn_(1.8)O_4(M=Mg、Cd)相的晶格畸变与红外吸收峰频移

通过室温固相法制备了不同元素掺杂的前驱体,并采用分步煅烧法获得了尖晶石型LiMn2O4和LiM0.2Mn1.8O4(M=Mg、Cd)相。采用XRD和FTIR技术就元素掺杂对产物晶格畸变、Mn—O键长和键能强度等微观结构参数和光谱频移现象进行分析。结果表明,不同元素掺杂导致产物产生不同程度的晶格畸变。Mg元素掺杂使晶格收缩,Mn(Ⅳ)—O和Mn(Ⅲ)—O键收缩和键能强度增加,对应吸收峰发生蓝移;Cd元素掺杂使晶格膨胀,Mn(Ⅳ)—O和Mn(Ⅲ)—O键增长和键能强度降低,对应吸收峰发生红移。     

Enhanced π–π Interactions of Nonfullerene Acceptors by Volatilizable Solid Additives in Efficient Polymer Solar Cells

Fine‐tuning of the nanoscale morphologies of the active layers in polymer solar cells (PSCs) through various techniques plays a vital role in improving the photovoltaic performance. However, for emerging nonfullerene (NF) PSCs, the morphology optimization of the active‐layer films empirically follows the methods originally developed in fullerene‐based blends and lacks systematic studies. In this work, two solid additives with different volatilities, SA‐4 and SA‐7, are applied to investigate their influence on the morphologies and photovoltaic performances of NF‐PSCs. Although both solid additives effectively promote the molecular packing of the NF acceptors, due to the higher volatility of SA‐4, the devices processed with SA‐4 exhibit a power conversion efficiency of 13.5%, higher than that of the control devices, and the devices processed with SA‐7 exhibit poor performances. Through a series of detailed morphological analyses, it is found that the volatilization of SA‐4 after thermal annealing is beneficial for the self‐assembly packing of acceptors, while the residuals due to the incomplete volatilization of SA‐7 have a negative effect on the film morphology. The results delineate the feasibility of applying volatilizable solid additives and provide deeper insights into the working mechanism, establishing guidelines for further material design of solid additives.     

材料力学性能对液力胀接过程的影响分析

为寻求装配式空心凸轮轴结构设计和材料选择的理论依据,应用弹塑性力学分析了弹性模量和流动应力对液力胀接的影响.将内外管的变形过程简化为平面应变问题,根据典型点应力-应变曲线分析了液力胀接过程,并给出了不同材质套管的连接条件.研究结果表明:影响液力胀接的主要因素是内外管弹性模量和流动应力,这两个材料参数决定胀后内外管弹性回复量的大小;实现液力胀接内外管应满足的条件是:内外管弹性模量的比值大于内外管流动应力的比值.     

抽出式风机在治理工作面上隅角瓦斯的应用

针对漳村煤矿综采工作面上隅角瓦斯浓度高的情况,用抽出式风机处理上隅角瓦斯,较好地解决了上隅角瓦斯频繁超限事故,实现了矿井的安全生产。     

Characteristics of Ions Emitted from Laser-Induced Silver Plasma

In this work, study of laser-induced ions is presented. The plasma was produced by focusing a Nd：YAG laser, with a wavelength of 1064 nm, a pulsed width of 9-14 ns, a power of 1.1 MW and energy of 10 mJ, on silver target in vacuum （10-3 Torr= 1.3332 Pa）. The characteristics of ion streams were investigated by CR-39 detectors located at angles of 0°, 30°, 60° and 90° with respect to normal of the target. The distance between the silver target and each detector was 11 cm. The energy of silver ions was found ranging from 1.5 eV to 1.06E4 eV. There was a high concentration of ions with low energy as compared to those with high energy, showing the energy distribution amongst the ions. The flux of ions was maximum in the axial direction which was decreasing with the angle increase with respect to normal of the target, and finally became minimum in the radial direction. Hence the silver ions have shown anisotropic behaviour.     

PVC低发泡实心板挤出成型技术要点

在PVC低发泡实心板挤出成型中,控制聚合物熔体的流动和发泡是保证产品质量的关键,重点介绍了生产工艺和原理,并分析了生产中的技术要点,提出了解决的办法。     

Tumor-Localized Administration of α-GalCer to Recruit Invariant Natural Killer T Cells and Enhance Their Antitumor Activity against Solid Tumors

Invariant natural killer T (iNKT) cells have the capacity to mount potent anti-tumor reactivity and have therefore become a focus in the development of cell-based immunotherapy. iNKT cells attack tumor cells using multiple mechanisms with a high efficacy; however, their clinical application has been limited because of their low numbers in cancer patients and difficulties in infiltrating solid tumors. In this study, we aimed to overcome these critical limitations by using α-GalCer, a synthetic glycolipid ligand specifically activating iNKT cells, to recruit iNKT to solid tumors. By adoptively transferring human iNKT cells into tumor-bearing humanized NSG mice and administering a single dose of tumor-localized α-GalCer, we demonstrated the rapid recruitment of human iNKT cells into solid tumors in as little as one day and a significantly enhanced tumor killing ability. Using firefly luciferase-labeled iNKT cells, we monitored the tissue biodistribution and pharmacokinetics/pharmacodynamics (PK/PD) of human iNKT cells in tumor-bearing NSG mice. Collectively, these preclinical studies demonstrate the promise of an αGC-driven iNKT cell-based immunotherapy to target solid tumors with higher efficacy and precision.