固体酸催化合成苯甲酸正丁酯

论述了利用对甲苯磺酸，磺化苯磷酸锆，六水三氯化铁，氧化亚锡，十二水合硫酸铁铵，一水硫酸氢钠，固体超强酸和杂多酸等各种固体催化剂催化合成苯甲酸正丁酯的方法。研究发现：各种催化剂的催化效果良好，酯收率达74％以上，有的甚至达97.8％。同时对各种催化剂的催化机理进行了初步探讨，对各种固体酸的催化效果也进行了比较。     

A SIMPLE METHOD FOR STUDYING THE KINETICS OF GAS-SOLID REACTIONS IN A FLUIDIZED BED REACTOR

A methodology for studying the kinetics of gas-solid reactions in a fluidized bed reactor is presented. This procedure is based on the analysis of the response of the system (flue gases) when batches of solids of different weight are added to the reactor. The method has been applied to the study of limestone particle calcination. The calcination rate constants obtained are in good agreement with those found in the literature. The method offers the advantage of simplicity and avoids the use of model assumptions or empirical correlations.     

Synthesis of Pseudoionones by Acid and Base Solid Catalysts

The preparation of pseudoionones by aldol condensation reaction between citral and acetone have been carried out in the presence of acid (HY and beta zeolites), an acid–base (amorphous aluminophosphate) and basic catalysts such as an aluminophosphate oxynitride, MgO and different activated hydrotalcites. The results showed that acid or acid–base catalysts were not successful for performing in one pot the preparation of ionones. MgO and calcined hydrotalcites showed excellent activity and selectivity to pseudoionones, with calcined hydrotalcite more selective than MgO. Moreover, the rate of reaction can be improved by activating the hydrotalcite through rehydration. This activation can be successfully done by simply adding the optimum amount of water to the calcined hydrotalcite before reaction. The inhibiting effect of the concentration citral on the catalytic activity of rehydrated hydrotalcites that has been reported to occur at 273 K can be avoided by working at a reaction temperature of 333 K.     

ZAG100－1000／35型全自动压滤机的研制与应用

介绍了ＺＡＧ１００－１０００／３５型全自动压滤机的研制与应用情况．表明机组主机结构、生产能力、自控水平均比引进产品有所提高，整机性能良好。     

淤浆鼓泡床中固体粒子的悬浮特性

研究了三相鼓泡床中的临界固含率,以空气作气相,水、乙醇-水、丙酮-水、萜松醇-二甲苯作液相,石英砂、煤、雷奈镍作为固相。分析了鼓泡柱的高径比、气体速度、固体粒子的大小和比重、液体的粘度对临界固含率的影响,提出了含有这些参数的无因次数群的关联式,讨论了本文提出的关联式和文献报导的差别。     

Chemical Reaction Engineering and Research and development of gas solid systems

A general procedure is proposed for innovative research and development of gas-solid reactor systems, with a brief explanation of the significance of each step in the procedureBased upon the contacting mode between gas and solid phases, as well as the ways of supplying thermal energy to the reacting regions, various types of gas-solid reactor systems are classified by using tables of so called “matrix” form, for thermal cracking and gasification of heavy oils, gasification of coal, gasification of solid waste, calcination of limestone, clinkering of cement and reduction of iron ore.The importance of fundamental concepts is emphasized for successful research and development by presenting several examples; namely, calcination of limestone, thermal cracking of heavy oils and gasification of solid waste materials.In connection with the direction in which fundamental research should be oriented, four primary ways of thinking are proposed, which can be applied to obtain innovative ideas for further research and development in this field.One example of the author's practical experience was selected to show the role of the fundamental research in the course of large scale development. Finally the author outlines the role of chemical reaction engineering to innovate the novel gas-solid reactor systems which may be inevitable for simultaneous solution of the three big E's; namely, Energy, Environment and Economy.     

Settling velocities of particles in bubbly gas-liquid mixtures

The axial dispersion-sedimentation model is commonly used to describe the axial concentrations of solids in three phase bubble columns at low liquid velocities. When the two parameters of this model, the particle settling velocity and the solids axial dispersion coefficient, are uncoupled by the use of various assumptions, physically unrealistic values of these parameters often result. Direct experimental measurements of solids settling rates in bubbly gas-liquid mixtures were carried out. The measured mean settling velocities decreased slightly with gas flow rate and were equal to or slightly less than the single particle free settling velocity in the liquid alone. Solids axial dispersion coefficients were also obtained from the solids settling rate distribution data, and gave values considerably less than the experimental liquid axial dispersion coefficient.     

纳米稀土复合固体超强酸催化合成乙酸苄酯

采用共沉淀法制备了纳米稀土复合固体超强酸SO4^2-／ZrO2-2％Nd2O3催化剂，电镜分析表明，催化剂颗粒直径在25nm左右，比表面积测定：71．03m^2／g。酸强度-12．70〈Ho〈-11．99。并对合成乙酸苄酯的最佳反应条件进行了研究。研究表明：当苯甲醇与乙酸的物质的量比为1：2，反应时间为5h，反应温度为120℃，催化剂用量为6％苯甲醇的质量时，酯化率可达92．04％。研究发现，该催化剂可重复使用并可活化再生。     

Solid state interfacial reactions in electrodeposited Ni/Sn couples

Ni/Sn couples,prepared by sequentially electroplating Ni layers and Sn layers on metallized Si wafers,were employed to study the mierostructures and growth kinetics of Ni-Sn intermediate phases,when the Ni/Sn couples were aged at room temperature or annealed at temperatures from 150 to 225℃for various times.The results show that the NiSn phase and Ni_3Sn_4 phase are formed,respectively,in the aged couples and annealed couples.The Ni_3Sn_4 layer is continuously distributed between the Ni and Sn sides in t...     

有限体积法求解立体角离散误差

为解决采用有限体积法求解辐射传输方程时引起离散误差的问题,从有限体积法立体角内热流密度的求解过程出发,运用泰勒级数推导了近似误差的表达式,并分析影响离散误差的各种因素,包括离散射线数,辐射强度分布,假散射及网格比.根据分析结果,采用辐射强度的连续分布模型,模拟了各种因素对误差的影响.结果表明,辐射强度的分布函数对于有限体积法的离散误差有一定程度影响.当增加网格数及减小网格尺寸比时,可以有效地减小离散误差.假散射与离散误差间呈较强的非线性耦合关系.