平行梁式电容传感器力学性能的仿真与分析

针对S型平行梁式电容称重传感器参数结构设计问题,运用有限元软件ANSYS Workbench对平行梁式弹性体结构进行参数化模拟仿真,基于二次多项式曲面拟合建立其结构力学性能与主要结构参数的函数关系,并通过算例分析验证了拟合公式的有效性。研究表明,拟合公式对复杂仿真计算后的结果有很好的近似,能更好的反应实际情况,公式结构更加简洁,具有较快的收敛速度、较高的精度和较好的推广能力,有利于准确实现平行梁式电容称重传感器结构参数设计。     

用三维实体单元分析薄壁箱型结构应注意的问题

从四边固定正方形板受均布载荷的经典问题入手,结合不同类型单元的特点,探讨应用三维实体单元分析薄壁箱型结构时应注意的几个问题,纠正三维实体单元分析和应用的误区,为提高结构分析计算结果精度提供参考.     

固体酸催化合成苯甲酸正丁酯

论述了利用对甲苯磺酸，磺化苯磷酸锆，六水三氯化铁，氧化亚锡，十二水合硫酸铁铵，一水硫酸氢钠，固体超强酸和杂多酸等各种固体催化剂催化合成苯甲酸正丁酯的方法。研究发现：各种催化剂的催化效果良好，酯收率达74％以上，有的甚至达97.8％。同时对各种催化剂的催化机理进行了初步探讨，对各种固体酸的催化效果也进行了比较。     

A SIMPLE METHOD FOR STUDYING THE KINETICS OF GAS-SOLID REACTIONS IN A FLUIDIZED BED REACTOR

A methodology for studying the kinetics of gas-solid reactions in a fluidized bed reactor is presented. This procedure is based on the analysis of the response of the system (flue gases) when batches of solids of different weight are added to the reactor. The method has been applied to the study of limestone particle calcination. The calcination rate constants obtained are in good agreement with those found in the literature. The method offers the advantage of simplicity and avoids the use of model assumptions or empirical correlations.     

Synthesis of Pseudoionones by Acid and Base Solid Catalysts

The preparation of pseudoionones by aldol condensation reaction between citral and acetone have been carried out in the presence of acid (HY and beta zeolites), an acid–base (amorphous aluminophosphate) and basic catalysts such as an aluminophosphate oxynitride, MgO and different activated hydrotalcites. The results showed that acid or acid–base catalysts were not successful for performing in one pot the preparation of ionones. MgO and calcined hydrotalcites showed excellent activity and selectivity to pseudoionones, with calcined hydrotalcite more selective than MgO. Moreover, the rate of reaction can be improved by activating the hydrotalcite through rehydration. This activation can be successfully done by simply adding the optimum amount of water to the calcined hydrotalcite before reaction. The inhibiting effect of the concentration citral on the catalytic activity of rehydrated hydrotalcites that has been reported to occur at 273 K can be avoided by working at a reaction temperature of 333 K.     

ZAG100－1000／35型全自动压滤机的研制与应用

介绍了ＺＡＧ１００－１０００／３５型全自动压滤机的研制与应用情况．表明机组主机结构、生产能力、自控水平均比引进产品有所提高，整机性能良好。     

Approximate Symmetry Detection in Partial 3D Meshes

Symmetry is a common characteristic in natural and man‐made objects. Its ubiquitous nature can be exploited to facilitate the analysis and processing of computational representations of real objects. In particular, in computer graphics, the detection of symmetries in 3D geometry has enabled a number of applications in modeling and reconstruction. However, the problem of symmetry detection in incomplete geometry remains a challenging task. In this paper, we propose a vote‐based approach to detect symmetry in 3D shapes, with special interest in models with large missing parts. Our algorithm generates a set of candidate symmetries by matching local maxima of a surface function based on the heat diffusion in local domains, which guarantee robustness to missing data. In order to deal with local perturbations, we propose a multi‐scale surface function that is useful to select a set of distinctive points over which the approximate symmetries are defined. In addition, we introduce a vote‐based scheme that is aware of the partiality, and therefore reduces the number of false positive votes for the candidate symmetries. We show the effectiveness of our method in a varied set of 3D shapes and different levels of partiality. Furthermore, we show the applicability of our algorithm in the repair and completion of challenging reassembled objects in the context of cultural heritage.     

Influence of untreated and novel electron‐beam‐modified surface‐coated silica filler on the thermorheological properties of ethylene–octene copolymer

We developed surface‐modified silica fillers by coating these with an acrylate monomer, trimethylolpropane triacrylate, or a silane coupling agent, triethoxyvinyl silane, followed by electron‐beam irradiation at room temperature. These were incorporated in an ethylene–octene copolymer rubber. Thermorheological studies of the unvulcanized ethylene–octene copolymer and its untreated and modified silica‐filled composites were done with a shear dynamic oscillating rheometer. Modification of the silica filler, especially via the silanization process followed by electron beam treatment, significantly reduced filler–filler networking as revealed from the log–log plots of storage modulus and complex shear viscosity, and its real component. The rheological complexity of the compositions was analyzed from a double logarithmic plot of the storage modulus and loss modulus. The results obtained from the master curves constructed on the basis of the time–temperature superposition principle and the activation energy calculated from the Arrhenius equation for the flow of above these compounds further supported these findings. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2453–2459, 2003     

淤浆鼓泡床中固体粒子的悬浮特性

研究了三相鼓泡床中的临界固含率,以空气作气相,水、乙醇-水、丙酮-水、萜松醇-二甲苯作液相,石英砂、煤、雷奈镍作为固相。分析了鼓泡柱的高径比、气体速度、固体粒子的大小和比重、液体的粘度对临界固含率的影响,提出了含有这些参数的无因次数群的关联式,讨论了本文提出的关联式和文献报导的差别。     

Chemical Reaction Engineering and Research and development of gas solid systems

A general procedure is proposed for innovative research and development of gas-solid reactor systems, with a brief explanation of the significance of each step in the procedureBased upon the contacting mode between gas and solid phases, as well as the ways of supplying thermal energy to the reacting regions, various types of gas-solid reactor systems are classified by using tables of so called “matrix” form, for thermal cracking and gasification of heavy oils, gasification of coal, gasification of solid waste, calcination of limestone, clinkering of cement and reduction of iron ore.The importance of fundamental concepts is emphasized for successful research and development by presenting several examples; namely, calcination of limestone, thermal cracking of heavy oils and gasification of solid waste materials.In connection with the direction in which fundamental research should be oriented, four primary ways of thinking are proposed, which can be applied to obtain innovative ideas for further research and development in this field.One example of the author's practical experience was selected to show the role of the fundamental research in the course of large scale development. Finally the author outlines the role of chemical reaction engineering to innovate the novel gas-solid reactor systems which may be inevitable for simultaneous solution of the three big E's; namely, Energy, Environment and Economy.