基于改进Kendall-f算法的发电机定子温度分析

在线监测发电机定子温度可有效发现定子部分过热性故障,如何从检测的温度数据中提取反映定子故障预警的信息是目前国内外研究的热点。该文采用可变窗改进Kendall-f算法处理监测温度数据,提取其变化趋势特征信息;采用偏度分析提取监测温度异常值,从而正确诊断定子过热性故障,仿真分析及实验结果表明该方法有效提高了定子温度监测与预警的准确率。     

导磁体在汽车零件感应加热中的应用技术

本文简单介绍了导磁体工作的基本原理，并给出在汽车零件大规模生产中所积累的导磁体应用的一些经验，以阐明如何更有效地使用导磁体。     

基于漏磁原理的钢丝绳探伤仪影响因素研究

介绍了钢丝绳探伤仪漏磁检测原理,并使用有限元分析方法分析了传感器零件的材料、钢丝绳的提离距离及断丝根数等对基于漏磁原理的钢丝绳探伤仪检测结果的影响。分析结果表明,提离距离、断丝根数等因素对探伤仪检测结果影响较大,断丝角度、深度等因素影响较小。     

Second-order terminal sliding mode control for hypersonic vehicle in cruising flight with sliding mode disturbance observer

This paper focuses on the design of nonlinear robust controller and disturbance observer for the longitudinal dynamics of a hypersonic vehicle (HSV) in the presence of parameter uncertainties and external disturbances. First, by combining terminal sliding mode control (TSMC) and second-order sliding mode control (SOSMC) approach, the secondorder terminal sliding control (2TSMC) is proposed for the velocity and altitude tracking control of the HSV. The 2TSMC possesses the merits of both TSMC and SOSMC, which can provide fast convergence, continuous control law and hightracking precision. Then, in order to increase the robustness of the control system and improve the control performance, the sliding mode disturbance observer (SMDO) is presented. The closed-loop stability is analyzed using the Lyapunov technique. Finally, simulation results illustrate the effectiveness of the proposed method, as well as the improved overall performance over the conventional sliding mode control (SMC).     

Stabilization of One‐Dimensional Schrödinger Equation with Variable Coefficient under Delayed Boundary Output Feedback

This article considers stabilization of a one‐dimensional Schrödinger equation with variable coefficient and boundary observation which suffers from an arbitrary given time delay. We design an observer and predictor to stabilize the system. The state is estimated in the time span where the observation is available, and also predicted in the time interval where the observation is not available. It is shown that the estimated state feedback stabilizes the system exponentially. A numerical simulation is presented to illustrate the effect of the stabilizing controller.     

发动机进气系统高通量富氧膜的研制

采用交联改性的方法对较低分子量的乙烯基硅橡胶进行了改性研究,制备了高通量的富氧膜,结合单因素实验法和Design-expert正交实验设计,考察了原料配比、交联反应时间、固化温度和固化时间等因素对富氧膜性能的影响,确定了最佳富氧性能膜的制备条件:原料配比4.3,反应时间2.15h,固化温度86.25℃,固化时间1.75h;获得了富氧浓度为28.68%,透气量为4696.33 barrer的富氧膜,该膜的富氧浓度与常规商品化膜相当,透气量为常规商品化膜的2~4倍,有应用于发动机富氧进气系统的前景。通过扫描电镜检测、机械性能检测等手段对复合膜进行了进一步表征。     

Optimization of A-TIG process parameters using response surface methodology

In the present work, the influence of process parameters such as welding current (I), welding speed (S), and flux coating density (F) on different aspects of weld bead geometry for example depth of penetration (DOP), bead width (BW), depth to width ratio (D/W), and weld fusion zone area (WA) were investigated by using the central composite design (CCD). 9–12% Cr ferritic stainless steel (FSS) plates were welded using A-TIG welding. It was observed that all input variables have a direct influence on the DOP, BW, and D/W. However, flux coating density has no significant effect on WA. Mathematical models were generated from the obtained responses to predict the weld bead geometry. An optimized DOP, BW, D/W, and WA of 6.95?mm, 8.76?mm, 0.80, and 41.99?mm², respectively, were predicted at the welding current of 213.78 A, the welding speed of 96.22?mm/min, and the flux coating density of 1.99?mg/cm². Conformity test was done to check the practicability of the developed models. The conformity test results were in good agreement with the predicted values. Arc constriction and reversal in Marangoni convection were considered as major mechanisms for the deep and narrow weld bead during A-TIG welding.     

Semi‐global output feedback tracking control for fully actuated ships

An output feedback trajectory tracking controller for a kind of 3 degrees of freedom (DOF) ship motion nonlinear model is designed. The closed‐loop control system is proven to be uniformly semi‐globally exponential stable with a separate stability result for the observer by applying nonlinear cascaded system theory. Simulation results on a model ship, Cybership II, are presented to validate the proposed control scheme. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Energy flux characteristics of seismic waves at the interface between soil layers with different saturations

Based on the multiphase poroelasticity theory describing the propagation of waves in the unsaturated fluid-saturated porous medium, the reflection and transmission coefficients of the seismic waves at the interface between soil layers with different saturations are obtained. Our unsaturated model consists of a deformable skeleton in which two compressible and viscous fluids (i.e., water and gas) flow in the interstices. Three compressional waves (i.e., P1, P2, and P3 waves) and one shear (i.e., S wave) wave exist in the unsaturated soils. The expressions for the energy ratios of the various reflected and transmitted waves at the interface during the transmission and reflection processes are presented in explicit forms accordingly. At last, numerical computations are performed and the results obtained are respectively depicted graphically. The variation of the energy ratios with the incident angle, wave frequency and saturation degrees of the upper and lower soil layers is illustrated in detail. The calculation results show that the allocation of incident seismic waves at the interface is influenced not only by the angle and frequency of the incident seismic waves, but also by the saturations of the upper and lower soil layers. It is also verified that, at the interface, the sum of energy ratios of the reflected and transmitted waves is approximately equal to unity as was expected. This study is of importance to several fields such as geotechnical engineering, seismology, and geophysics.     

锅炉过热器/再热器管道热流密度的评估方法

通过建立数值模型进行编程计算,分析了锅炉过热器/再热器管道在不同的管道几何尺寸、烟气温度、蒸汽流量和温度下,各个界面热流密度的变化情况。通过回归分析得到了热流密度与管道内壁侧氧化层厚度和运行时间的关系表达式,即热流密度的评估关系式。