网格曲面中孔洞的光滑填充算法研究

三角网格模型是几何描述的一种重要形式，有着广泛的应用。但三角网络模型常常会存在孔洞缺陷。这些孔洞的存在一方面影响视觉效果，另一方面会影响许多后续的操作，如快速原型制造、有限元分析等，因此有必要对这些孔洞进行修补。目前绝大多数孔洞填充算法是将网格模型中的孔洞提取成空间多边形，并对孔洞多边形进行三角化。这种处理方法的主要缺陷是没有考虑网格曲面在孔洞附近的几何形态，因而填充部分不能与整个曲面光滑地融为一体。笔者提出了一种三角网格曲面中孔洞的光滑填充算法。该算法根据孔洞周围网格曲面的几何信息来增加孔洞内部的采样点，然后再对增加的采样点进行三角化，较好地解决了填充部分与整体曲面光滑连接的问题。     

Strength of Metals at High Strain Rates

Results of metal testing in impact tension–compression and indentation are analyzed. As the analysis of these data demonstrates, the strength of metals increases greatly with strain rates and at moderate indentation rates. At high indentation rates, a decrease in the specific energy (per unit volume of a displaced material) necessary for the formation of a conical cavity was observed. The account of the effects of viscosity, temperature increase upon plastic deformation and its localization can be used to explain the above phenomena.     

提高曲面近似展开精度的方法与实现

通过对不可展曲面近似展开精度的研究，提出了根据曲面曲率的大小对曲面自动进行网格划分，通过对综合展开误差数据场进行数据拟合来选取最优展开基点，基于空间曲面与其展开图间近似的等距变换关系进行展开样形的误差矫正等3种方法，这几种方法的实现在不同程度上有效地减小了曲面的近似展开误差，提高了曲面的近似展开精度。     

纤维复合材料的热膨胀系数

提出了一种利用压电光声技术测量材料热膨胀系数的实验方法,并测试了单向复合材料C/C、C/Al的横向、纵向的热膨胀系数。根据已有的理论计算方法与实验结果对该方法的测试结果进行验证,证明了该检测方法的可靠性,进而又测量了C/C、C/Al材料在任一方向上的热膨胀系数。这种方法克服了理论计算过程复杂以及常规手段无法测量任一方向上热膨胀系数的缺陷。     

Variations in Spectral Slope in Lake Taihu,a Large Subtropical Shallow Lake in China

Spectral slope (S), describing the exponential decrease of the absorption spectrum over a given wavelength range, is an important parameter in the study of of chromophoric dissolved organic matter (CDOM) dynamics, and also an essential input parameter in remote sensing models. Furthermore, S is often used as a proxy for CDOM composition, including the ratio of fulvic to humic acids and molecular weight. The relative broad range in S values reported in the literature can be explained by the different spectral ranges and fitting methods used. A single exponential model is used to fit the S values for 17 investigations involving 458 samples in Lake Taihu from January to October in 2004. The average S value was 15.18 ± 1.39 μm⁻¹ for the range of 280–500 nm, which fell within the range reported in the literature. The frequency distribution of S value basically obeyed a normal distribution. Significant differences in S values between summer and other seasons showed that phytoplankton degradation was one of the important sources of CDOM in summer, whereas CDOM mainly came from the river input in other seasons. Furthermore, the estimated S value decreased with increasing wavelength range used in regression. The maximum and minimum values derived from the regression were 17.89 ± 1.25 μm⁻¹ and 13.62 ± 2.11 μm⁻¹ for the wavelength ranges of 280–380 nm and 400–500 nm, respectively, a decrease of 23.9%. S values significantly decreased with the increase of CDOM absorption coefficients. CDOM absorption coefficients could be more appropriately estimated from exponential model introducing the variation of S with absorption coefficients, making them useful for a remote sensing bio-optical model of Lake Taihu. DOC-specific absorption coefficient a*(λ) and the parameter M describing molecular size of the humic molecules could also be used as a proxy for the sources and types of CDOM. A general relationship was found between S and a*(λ), and M values. S increased with the decrease of DOC-specific absorption coefficient and the increase of M corresponding to the decrease of molecular weight.     

从实例看花岗岩地基勘察的几个特点

以花岗岩类的硬质岩作为建筑物基础持力层,具有承载力高、稳定性好,抗震性强的特点,被许多重要建筑物所采用,尤其是沿海地区的高层建筑物。但往往此类基岩的层面不够“平整”,基岩层面的变化对基础的设计、施工,尤其是桩基础影响很大。本文通过对某高层建筑进行地基勘察的实例,总结了花岗岩地区风化岩层的几个特征及其在工程勘察中需注意的一些问题。     

（Ba1-xSrx）（Zn1/3Nb2/3）O3微波介质陶瓷温度系数的异常

研究了（Ba1-xSrx）（Zn1/3Nb2/3）O3微波介质陶瓷温度系数的非线性变化以及异常的原因。根据CM公式，随着系统中Sr（Zn1/3Nb2/3）O3的增多，τc的异常是由于氧八面体的畸变导致的相转变（对称性降低）所造成的（晶体结构由无序立方相向有序赝立方相的连续变化）。相转变的发生相应影响了极化以及极化模式，这是造成τc异常的根本原因。     

NiTi形状记忆合金激光气体氮化层表面特征

为改善NiTi合金的表面性能，利用2kW连续波Nd：YAG对NiTi合金进行激光气体氮化处理。采用SEM、TEM、XRD、XPS和纳米压痕研究了氮化层的显微组织及表面特征．结果表明：激光气体氮化可以在NiTi合金表面制备连续、无裂纹、厚度为2μm的TiN表面层，该表面层中基本不合有Ni元素且具有很高的硬度，其纳米压痕硬度为29．28GPa．     

An investigation of the relation between the temperature dependences of the initial unbalance and the output signal of resistance strain sensor bridge circuits

The relation between the initial unbalance and the output signal of bridge circuits when acted upon simultaneously by the physical factor being measured and the temperature of the surroundings when the bridge is supplied from a voltage or current source is investigated. Analytic relations are obtained which explain the temperature dependence of the useful output voltage under external physical action. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 48–49, 2007.