高层印制线路板正面临的对位挑战

封装工业正在推动着印制线路板技术水平朝着半导体要求的方向发展。高密度印制线路板正广泛用于网络路由器、自动测试设备和服务器领域。高密度要求(>150 IO/cm~2)正成为客户的普通需求。为满足现有的高密度封装要求,由于线宽、线距和通孔孔径正接近传统制作极限,普遍的方法就是不断增加印制线路板的层数。这些特征正驱动着印制线路板在基材、图像转移、蚀刻、电镀、阻焊、测试流程和对位系统的变化。此文主要讲述了印制线路板特性的变化趋势和利用对位模式和雷利分布去预测满足高级对位要求的能力以及印制线路板各流程中有关对准度的控制要点。     

非线性编辑中特效图文素材的应用

Cool 3D是一款特效图文制作软件，适用于动画片段、3D文字、图形等制作场合。Cool 3D中制作的特效素材应用于非线性编辑中，可以丰富素材的表现形式，提高节目编辑制作的整体质量。     

离心泵叶片边界层方程的解析解

给出了离心泵叶片表面的边界层动量积分方程的解的构造及其计算方法，并以计算实例说明了该解的唯一性和算法的稳定性、收敛性。它是分析离心泵流体在叶片表面边界层参数的基础。     

Effect of nitrocarburizing on sulphide layer during nitrocarburizing-sulphurating treatment

Compared with the single sulphurating treatment, the duplex treatment of nitrocarburizing-sulphurating can more effectively improve the properties of steel such as friction-reducing, wear resistance and anti-scuffing. Under the same processing parameters, the sulphide layers were fabricated on the surface of CrMoCu alloy cast iron by single ion-sulphurating treatment and nitrocarburizing-sulphurating duplex treatment, respectively. Through the analysis of the sulphide, the effect of the nitrocarburizing on the fabrication of the sulphide layer was investigated. And the result shows that the fabrication of sulphide layer is promoted by the nitrocarburizing treatment.     

Reduction of low-frequency pressure fluctuations in wind tunnels

The determination of dynamic wind loads on buildings, i.e. pressure and deflection, has gained increasing interest (European Prestandard ENV 1991-2-4, Eurocode 1: basis of design and actions on structures—Part 2-4: actions on structures—wind actions, European Committe for Standardization, Brussels, 1995; DIN 1055 Teil 4 Lastannahmen für Bauten, Verkehrslasten, Windlasten bei nicht schwingungsanfälligen Bauwerken, 1991; N. Hölscher, M. Hortmanns, J. Sahlem, Praxisnahe Erfassung von Windwirkung an Industrie- und Hochbauten, Windwirkung im Bauwesen, Braunschweig, 7, Dreiländertagung D-A-CH 2001, Windtechnologische Gesselschaft, 2001 [1], [2] and [3]). Therefore, the spectral distributions of velocity and pressure fluctuations in wind tunnels are an important quality aspect. While velocity fluctuations can be manipulated by the obstacles used to create the turbulence, pressure fluctuations are influenced by acoustic noise as well. Especially, the first eigenfrequency of the longitudinal mode of the wind tunnel tends to disturb the pressure spectrum.In this paper, a solution for the reduction of low-frequency acoustic pressure fluctuation is presented and its application in the atmospheric boundary layer wind tunnel at the IAG is shown.     

长输管道外防护层的选择与应用

文章介绍了目前国内外长输管道外防护技术的特点和防护层应用的现状,分析了常用防腐蚀材料的防腐蚀性能。指出在山区复杂地形条件下,应考虑环境条件和施工条件,并通过技术经济分析对管道外防腐蚀层进行合理选择。     

硅外延片中的杂质控制

有5类掺杂源影响硅的外延片中的杂质分布。主掺杂质控制外延层的杂质浓度，决定外延层的电阻率。固态外扩散、气相自掺杂和系统自掺杂影响衬底界面附近的外延层杂质浓度的深度分布。该文介绍了此3类掺杂源的掺杂过程和抑制方法。金属杂质在外延层中对器件有害，防止沾污和使用吸杂技术能降低金属杂质在外延层中的浓度。     

The Adhesion and Formation Mechanism of Blast Furnace Gunning Layer

1 Introduction Gunning refractories are unshaped refractories commonly used in iron and steel industry for the main- tenance of furnace linings. The specific way of gunning processing requires the refractory to have specific rheo- logical properties so as…     

Homogenization of hardness distribution and distortion in high pressure gas quenching

Quenching with gases rather than oil or other liquid media has the advantages of reducing the risks concerning health and environment, while simultaneously homogenizing the quenching results and minimizing distortion due to a wide range of possible process parameter variations and the pure convective heat transfer. In this contribution, a coupled solution for increasing homogenization of quenching results within high pressure gas quenching will be presented. In the first stage, an experimental test facility was set up for flow investigations and in the second stage a numerical simulation model was generated. The numerical and experimental results of the flow through the chamber were compared for several boundary conditions. Finally, after complete verification of the simulation, the model may be used to assist in parameter variation for optimization of homogeneous high pressure gas quenching.     

油气输导体系的类型及配置关系

将输导体系划分为储集层输导体系、断裂输导体系和不整合输导体系3大类，8种类型，指出输导体系的时空配置关系是决定油气藏的重要因素；着重阐明了输导层在空间和时间上的配置关系，认为这些配置关系是影响输导体系有效性的重要因素；提出了运移级次性的概念，讨论了划分运移级次对油气运移研究的意义，指出准噶尔盆地西北缘邻近玛湖以储集层输导体系和不整合输导体系为主．边缘地区以断层输导体系为主。浅层油气成藏期主要取决于断层的活动期。