南京地区固定式安装太阳能电池板最佳倾角设计

对于固定安装的光伏电池板,其倾角的选择直接影响到所接收到的太阳辐射量,从而决定着太阳能利用系统的性能。本文在获得南京地区辐射资料的基础上,采用太阳辐射量气象学模型,针对任意方位角固定式安装的光伏电池板给出了最佳倾角的计算结果。该结果可为南京地区太阳能系统的设计与安装提供理论依据,并为相近地区太阳辐射量计算提供参考。     

四元数与欧拉角刚体动力学数值积分算法及其比较

为推广四元数保辛积分在工程中的应用,对欧拉角表示的状态方程数值积分与四元数的保辛积分进行比较.重陀螺的数值仿真结果表明四元数保辛积分的数值结果明显优于欧拉角状态方程积分.与欧拉角状态方程积分相比,四元数保辛积分在刚体动力学的数值仿真中更具优势.     

新型螺杆挤出机固体输送理论的研究

介绍了一种嵌套式新型螺杆挤出机。在固体输送段对内螺杆的两种等效情况下固体塞的运动和受力作了深入分析。理论上证明了这两种情况下的固体输送机理与外螺杆的情况相同,均建立在固体摩擦输送机理基础之上;讨论了牵引角、摩擦因数和螺纹升角对上述三种情况固体输送流率的影响。结果表明,螺杆旋转机筒静止和螺杆静止机筒旋转两种情况下固体输送流率相差不大,而螺杆机筒同时旋转情况下的固体输送流率远大于其他两种情况。增大牵引角、降低螺杆表面粗糙度和提高机筒内表面的摩擦因数均有助于提高固体输送流率。螺杆旋转机筒静止和螺杆静止机筒旋转这两种情况下最佳螺旋角均为17°左右,而螺杆机筒同时旋转情况下最佳螺旋角为15°左右。     

基于多判据的散乱点云特征点提取算法

为了有效获取散乱点云中的尖锐特征点和边界特征点,提出一种利用多判据融合的特征点提取算法。首先利用一种改进的k-d tree构建点云拓扑,搜索样点的K局部邻域;然后利用法向夹角判定准则、核密度判定准则、场力和判定准则分别求取各个样点局部邻域的三个特征参数,最后通过加权计算特征参数得到每个样点的特征值与全局判定阈值,特征值比阈值大的点即为特征点。实验证明,该算法能有效的获取散乱点云中边沿特征点与尖锐特征点。     

丙烯酸型亲水涂料乳胶粒表面羧基分布的研究

研究了以苯乙烯为核,丙烯酸酯类为壳的核壳乳液,采用丙烯酸为功能性单体,成膜后羧基为极性基团分布在涂膜表面达到亲水目的。讨论了功能单体丙烯酸(AA)在乳胶粒表面的分布情况及其加量对涂膜亲水性的影响,通过电导滴定发现当AA的加入量为3%时,水相中游离的丙烯酸含量为5.57%,聚合物表面的羧基含量为36.11%,涂膜的亲水性达到最佳,水接触角为51.1°。本文还讨论了核壳法和核壳翻转法对乳胶粒表面羧基分布及涂膜亲水性能的影响,两者的电导滴定曲线形状一致,由两个当量点可以计算出水相中游离的丙烯酸含量为1.47%,而乳胶粒表面羧基分布的含量为43.59%,可见,用核壳翻转法合成的乳液,乳胶粒表面羧基分布含量比普通聚合方法合成的乳胶粒表面羧基分布含量高,涂膜亲水性进一步提高,水接触角降低为44.5°。     

影响氟改性硅丙乳液聚合及其聚合物膜表面特性的因素

采用种子乳液聚合方法制备了阴、阳离子型氟改性硅丙乳液,用红外光谱对聚合物进行了表征,考察了聚合温度、氟改性单体和种子乳液的用量、乳化剂用量和pH值等因素对转化率和聚合物膜与水之间接触角的影响。结果表明,该聚合物中含有聚硅氧烷链段和CF2基团;聚合温度对转化率的影响较显著;在阳离子乳化体系中,当聚硅氧烷种子乳液、含氟丙烯酸酯单体和乳化剂的用量分别为10%、10%和1.1%时,转化率可以达到90%左右,接触角达到104°以上;随着体系pH值的逐渐增大,阳离子型氟改性硅丙乳液的Zeta电位明显降低,但阴离子型乳液的Zeta电位变化较小。     

沙漠风积沙地基扩展基础抗拔现场试验研究

通过在新疆、宁夏和内蒙古典型沙漠地区完成的现浇混凝土和装配式2种扩展基础在上拔、上拔与水平力组合工况下的25个现场试验,获得了风积沙扩展基础抗拔荷载-位移曲线,并确定了各试验基础的抗拔极限承载力。按照"土重法"计算原理,得到了反映沙漠风积沙地基抗拔承载性能的极限"上拔角"。经统计分析,得到沙漠风积沙极限"上拔角"标准值为16.8°,该值考虑了沙漠风积沙的区域特征、基础型式与尺寸、荷载工况等因素,可为沙漠地区输电线路杆塔基础的工程设计提供依据。     

Wetting properties of polystyrene ionomers treated with plasma source ion implantation

The wetting properties of polystyrene‐based ionomers treated with plasma source ion implantation (PSII) were investigated by the measurement of water contact angles. When sulfonated ionomers were aged for a few days, the hydrophobic recovery for the ionomers became much slower than that for the nonionic polymers. However, when the samples were aged over 20 days, the water contact angle of the ionomers converged with that of the nonionic polymer. Thus, it was concluded that the ionic interaction between the ionic groups and the presence of ionic groups together resulted in the slow hydrophobic recovery and that the aging effect was significant for the ionomers. For the methacrylate ionomer of low ion content, on the other hand, it was found that the PSII treatment produced only a small change in hydrophobic recovery behavior. Thus, it was suggested that the low ionic content coupled with the small size of the ionic unit might cause changes only of a very insignificant degree in hydrophobic recovery behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2500–2504, 2002     

Immobilization of biologically active species on PA‐6 foils treated by a dielectric barrier discharge

In the field of biomaterials and biomedical devices, surface activation has been focused on creating functional groups capable of preferential adsorption of biologically active species (proteins, enzymes, cells, drugs, etc.). In this way an interface can be created between the synthetic material and the biological medium, with the aim of increasing the compatibility of the implant with the human organism. In our experiments a dielectric barrier discharge (DBD), in helium at atmospheric pressure, was used as the source of energy capable of creating active centers that render the functionalized surface favorable to immobilization of biological molecules. Retention of immunoglobulin (IgG) and heparin biomolecules on polyamide‐6 (PA‐6) surfaces after treatment by the DBD was analyzed by atomic force microscopy, adhesion evaluation, and measurement of the contact angle titration in order to assess this incorporation on the treated surfaces. The marked adsorption of the biomolecules on the active sites created by DBD on the exposed surfaces also was related to a complex set of processes, such as enhanced roughness, increased surface wettability, and modified distribution of cationic and anionic groups on the treated surfaces. All these factors could promote interfacial interactions between the specific groups of the biomolecules existing in the biological medium and the type of cationic and/or anionic groups present on the surface. The efficiency of the DBD treatment showed that the DBD technique is useful for preactivation of the polymer surface for immobilization of other biologically active species (such as drugs and enzymes). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1985–1990, 2003     

Thermal crosslinking of collagen immobilized on poly(acrylic acid) grafted poly(ethylene terephthalate) films

Graft polymerization of acrylic acid onto plasma‐treated poly(ethylene terephthalate) (PET) films was used to prepare surfaces suitable for collagen immobilization by dip‐coating. Such surfaces could be used as matrices for smooth muscle cell cultures in tissue engineering. Contact angle measurements showed that plasma‐treated and grafted PET films undergo considerable surface reorganization during storage under ambient conditions. However, after collagen immobilization the contact angle remained relatively stable. The amount of collagen initially attached to the film surface increased with increasing poly(acrylic acid) graft density, but subsequent washing in water led to significant collagen loss. This loss could nevertheless be substantially reduced by thermal crosslinking of the collagen in the range 110–130 °C. Atomic force microscopy (AFM) observations suggested that the washed crosslinked collagen has a very similar structure to that of the un‐crosslinked collagen. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1874–1880, 2002