Cracked Brazilian disc specimen subjected to mode II deformation

The centrally cracked Brazilian disc specimen has been used by many researchers to study mode I and mode II brittle fracture in different materials. However, the experimental results obtained in the past from this specimen indicate that the fracture toughness ratio (K_IIc/K_Ic) is always significantly higher than the theoretical predictions. It is shown in this paper that the increase in the ratio K_IIc/K_Ic can be predicted if a modified maximum tangential stress (MTS) criterion is used. The modified criterion takes into account the effect of T-stress in addition to the conventional singular stresses. The fracture toughness ratio K_IIc/K_Ic is calculated for two brittle materials using the modified criterion and is compared with the relevant published experimental results obtained from fracture tests on the cracked Brazilian disc specimen. A very good agreement is shown to exist between the theoretical predictions and the experimental results.     

Slip initiation on frictional fractures

Direct shear tests and biaxial compression tests are conducted to investigate the onset of slip along a non-homogeneous frictional surface and to determine the effect of specimen thickness and confining stress on slip initiation and propagation. The specimens are made of two and three acrylic blocks with the contact surfaces between blocks having on their upper half a frictional strength smaller than on their lower half. This creates a “weak” surface on the upper half and a “strong” surface on the lower half. The specimens are then loaded in direct shear or biaxial compression with confining pressures ranging from 0.7 to 3.5 MPa. The onset of slip, slip propagation, and the stress field generated at the front and center of the blocks interfaces are monitored using a photoelastic technique where a thin photoelastic film is placed at the location where observations are made. The onset of slip at the weak-strong zone interface is treated as propagation of a frictional crack under Mode II loading. The critical stress intensity factor, K_IIC, at the onset of slip is obtained from photoelastic techniques. The results show a weak dependency of K_IIC on the normal stress applied and no influence of the specimen size for specimens thicker than 25.4 mm; for thinner specimens the K_IIC values are smaller because the boundaries of the specimen prevent the full development of the stress field ahead of the crack tip. The experiments show a linear increase of the critical energy release rate with normal stress which is explained with linear elastic fracture mechanics theories.     

基于数量化II类的数据分析库的设计与实现

数量化II类理论研究的是定性资料的分析,它与判别分析根据所研究的个体的观测指标来推断该个体所属类型的方式不一样。文章以数量化II类作理论依据,采用定性分析与定量分析相结合的方法,提出了一种数据分析库的设计和实施方案,该系统在数据分析和决策支持系统方面的研究和应用中有一定的特色。     

基于MES/MRPⅡ生产成本管理系统的设计与实现

成本管理是企业管理的重要组成部分。讨论了基于MRPⅡ和制造执行系统(MES)成本管理系统，该系统可与车间管理其它子系统实现信息集成，同时给出了系统功能模型和实现流程。该系统在实际应用中取得了较好的经济效益和社会效益。     

A new instrument for passive remote sensing: 2. Measurement of leaf and canopy reflectance changes at 531 nm and their relationship with photosynthesis and chlorophyll fluorescence

A previously described passive remote sensing fluorimeter (see companion paper) was modified to detect changes in the reflectance of vegetation. The utility of this remote sensing technique to measure the Physiological Reflectance Index (PRI) is shown at both leaf level under laboratory conditions and at the canopy level in the field. PRI, defined as the relative changes in reflectance at 531 nm with respect to those at 570 nm (PRI=R531−R570/R531+R570), is related to xanthophyll-related, dynamic changes of non-photochemical quenching of chlorophyll fluorescence. The robustness of this relationship by simultaneous remote sensing of PRI and chlorophyll fluorescence is strengthened. At the leaf level, the existence of two kinetically distinct components of PRI is shown. A fast (within seconds) component that is partly attributed to ΔpH induced chloroplast shrinkage, and a slow (within minutes), main component that is related to xanthophyll de-epoxidation, as demonstrated by its disappearance in the presence of DTT. Overall, PRI correlated better with non-photochemical quenching of chlorophyll fluorescence (NPQ) than with any other measured parameter, including the photochemical efficiency of PSII. Finally, at the canopy level and under field conditions, it is shown that PRI can be a useful tool for remote sensing of water stress in grapevines.     

Max Penson in Uzbekistan

Photography reached the Ottoman Empire soon after its invention, at about the time that painting began to be practised there as part of a broader project of assimilating aspects of European culture. This was in marked contrast to the situation in Europe, where photography had to contend with visual traditions from which it adopted pictorial conventions and subject matter. Instead of supplanting existing traditions of realistic visual representation, photography in the Ottoman Empire served as a discrete source of inspiration. This paper examines how this inversion of European experience within the Ottoman Empire provides an alternative to dominant narratives of photographic history. If one of the salient characteristics of modernist movements in Western art is their ability to break with tradition, then the adoption of Western practices of representation by artists within the Ottoman Empire may be viewed as a radical modernist success.     

A tetranuclear nickel(II) complex for water oxidation: Meeting new challenges

Ni complexes are promising catalysts for water splitting. Herein, a tetranuclear nickel(II) complex with bis-[(E)-N′-(1-(pyridin-2-yl)ethylidene)]carbohydrazide (HL), was synthesized and characterized by spectroscopic methods and single crystal X-ray analysis. The complex is a tetranuclear complex and the ligands are coordinated to the metal ions in the mono-negative form, (L)^- to form a tetranuclear [NiL]₄⁴⁺ unit. Each Ni(II) ion is six-coordinated by pyridine nitrogen, azomethine nitrogen and oxygen atoms of two perpendicular carbohydrazone ligands in the mer configuration. The complex was studied as a water-oxidizing catalyst. In the next step, the role of the Ni-based compound for water oxidation on the surface of fluorine doped tin oxide as one of the true catalysts was investigated by scanning transmission electron microscopy, scanning transmission electron microscopy, spectroelectrochemistry, and electrochemistry. The electrode after water oxidation by the complex was studied and a relation between the decomposition of the Ni complex and water-oxidation reaction was proposed. The experiments show that under water-oxidation condition in the presence of the complex, a Ni-based compound on the electrode is a candidate as a contributor to the observed catalysis.     

大化甲醇项目25500Nm3/h空分氩系统调试总结

介绍了大化甲醇装置空分氩系统调试经过,并进行了经验总结.