LLC负载超高频谐振逆变器并联特性研究

针对LLC负载1 MHz超高频感应加热电压型谐振逆变器并联运行中,串联不同电感时逆变器的工作特性进行了理论分析,探究逆变器换流角度以及LLC品质因数的变化,对逆变器输出电压存在差异时换流角度的变化进行了研究。得出1 MHz的电压型谐振逆变器在存在电感差异、电压差异时换流角度是较小的,可以保证逆变器工作在小感性换流状态。最后通过MATLAB/Simulink仿真实验验证了理论分析的正确性,并对仿真结果进行了综合分析。     

Single display gamut size metric

To measure the relative gamut sizes of wide‐gamut displays, it is herein proposed that the CIE 1931 xy chromaticity diagram be used rather than the nominally perceptually uniform CIE 1976 u′v′ chromaticity diagram. High correlations were found between the area‐coverage ratios in the xy diagram and the volume‐coverage ratios in the CIE 1976 L^*a^*b^* color space for major standard wide‐gamut color spaces. It is also demonstrated herein that performing planimetry in the uniform u′v′ diagram does not yield accurate relative display gamut sizes, even though the large sizes obtained using the u′v′ diagram are often reported regardless of the fact that its uniformity is valid only when the luminance factor is constant. The single display gamut size metric using the xy diagram will facilitate the unbiased development of wide‐gamut displays.     

弧齿锥齿轮数控加工和齿面接触点求解算法研究

在保证弧齿锥齿轮加工过程中刀盘相对于工件的运动关系不变的基础上,通过矩阵变换实现铣齿加工的数控展成.由于在数控加工每个插补周期中难以实现这种涉及大量运算的运动转换,因此将数控坐标轴的展成运动表示为以工件齿轮转角为参数的五次参数样条函数,保证了插补的实时性和精确性.文中将传统用于确定接触点位置时求解非线性方程组的问题,转化为带有3个设计变量的约束优化问题,简化了法线重合的条件,建立配对齿轮位置矢量相等的目标函数.最后给出实例对算法进行了说明和验证.     

Challenges of 22 nm and beyond CMOS technology

It is predicted that CMOS technology will probably enter into 22 nm node around 2012. Scaling of CMOS logic technology from 32 to 22 nm node meets more critical issues and needs some significant changes of the technology, as well as integration of the advanced processes. This paper will review the key processing technologies which can be potentially integrated into 22 nm and beyond technology nodes, including double patterning technology with high NA water immersion lithography and EUV lithography, new devi...     

UWB无线传感器网络中基于匹配滤波检测的TOA估计

深入研究了UWB(ultra wideband)无线传感器网络中基于匹配滤波门限检测的TOA(time of arrival)估计算法.针对现有算法的不足,提出了一种三步TOA估计算法:先确定DP(direct path)搜索区域,然后使用门限检测确定DP的粗略位置,最后精确搜索到DP的中心.其中,用于计算检测门限的门限因子依据匹配滤波输出的峭度动态设置,设置模型独立于信道模式,其正确性通过与使用固定门限因子所获得的性能对比进行了验证.与其他算法的性能对比仿真结果表明,所提出的三步TOA估计算法在运算效率和TOA估计精度上取得了较好折衷,适合于当前实际应用.还通过对TOA估计误差的统计分析讨论了测距结果的可信度:依据峭度将测距结果划分为可信和不可信两个级别,并为各级别的TOA估计误差分别了建立概率密度模型.在定位模块中有效利用这些可信度信息,可进一步提高定位精度.     

Five-axis tool path generation for a flat-end tool based on iso-conic partitioning

Traditionally, for the flat-end tool, due to the intertwined dependence relationship between its axis and reference point, most 5-axis tool-path generation algorithms take a decoupled two-stage strategy: first, the so-called cutter contact (CC) curves are placed on the part surface; then, for each CC curve, tool orientations are decided that will accommodate local and/or global constraints such as minimum local gouging and global collision avoidance. For the former stage, usually simplistic “offset” methods are adopted to determine the cutter contact curves, such as the iso-parametric or iso-plane method; whereas for the latter, a common practice is to assign fixed tilt and yaw angle to the tool axis regardless the local curvature information and, in the case of considering global interference, the tool orientation is decided solely based on avoiding global collision but ignoring important local machining efficiency issues. This independence between the placement of CC curves and the determination of tool orientations, as well as the rigid way in which the tilt and yaw angle get assigned, incurs many undesired problems, such as the abrupt change of tool orientations, the reduced efficiency in machining, the reduced finishing surface quality, the unnecessary dynamic loading on the machine, etc. In this paper, we present a 5-axis tool-path generation algorithm that aims at alleviating these problems and thus improving the machining efficiency and accuracy. In our algorithm, the CC curves are contour lines on the part surface that satisfy the iso-conic property — the surface normal vectors on each CC curve fall on a right small circle on the Gaussian sphere, and the tool orientations associated to a CC curve are determined by the principle of minimum tilt (also sometimes called lead) angle that seeks fastest cutting rate without local gouging. Together with an elaborate scheme for determining the step-over distance between adjacent CC curves that seeks maximum material removal, the presented algorithm offers some plausible advantages over most existing 5-axis tool-path generation algorithms, particularly in terms of reducing the angular velocity and acceleration of the rotary axes of the machine. The simulation experiments of the proposed algorithm and their comparison with a leading commercial CAM software toolbox are also provided that demonstrate the claimed advantages.     

虚拟加工中工件毛坯模型的建立

为解决虚拟加工中工件毛坯模型的识别问题,提出对规则形状工件毛坯采用OpenGL建模、对复杂形状工件毛坯采用美国初始图形交换规范（Initial Graphics Exchange Specification,IGES）文件进行模型数据转换的方法.该方法利用CAD软件为工件毛坯进行三维造型,生成IGES文件,然后在虚拟加工环境下读取IGES文件并生成工件毛坯模型,从而实现工件毛坯模型在新环境中的建立.经过建立具体的工件毛坯模型,验证相关理论的正确性,为在虚拟加工环境下工件毛坯模型的建立提供可行的依据.     

Investigation of machining characteristics in rotary ultrasonic machining of alumina ceramic

Alumina ceramic is well documented as a much-demanded advanced ceramic in the present competitive structure of manufacturing and industrial applications owing to its excellent and superior properties. The current article aimed to experimentally investigate the influence of several process variables, namely: spindle speed, feed rate, coolant pressure, and ultrasonic power, on considered machining characteristics of interest, i.e., chipping size and material removal rate in the rotary ultrasonic machining of alumina ceramic. Response surface methodology has been employed in the form of a central composite rotatable design to design the experiments. Variance analysis testing has also been performed with a view to observing the consequence of the considered parameters. The microstructure of machined rod samples was evaluated and analyzed using a scanning electron microscope. This analysis has revealed and confirmed the presence of plastic deformation that caused removal of material along with brittle fractures in rotary ultrasonic machining of alumina ceramic. The validity and competence of the developed mathematical model have been verified with test results. The multi-response optimization of machining responses (material removal rate and chipping size) has also been attempted by employing a desirability approach, and at an optimized parametric setting the obtained experimental values for material removal rate and chipping size were 0.4166?mm³/s and 0.5134?mm, respectively, with a combined desirability index value of 0.849.     

Study of tool trajectory in blisk channel ECM with spiral feeding

Electrochemical machining (ECM) plays an important role in blisk manufacturing. There are two steps in blisk ECM: machining of channels and precise shaping of blade profiles. In channel machining, channels are machined in the workpiece with allowance left to the following process. Therefore, the main aim of channel machining with ECM is to improve the allowance distribution. With this aim, a new ECM method for blisk channels, spiral feeding ECM, is developed in which the cathode feeds from blade tip to hub along with rotation motion around its axis. Through this combined motion, twisted channels are produced in the workpiece. The relationship between feed position and rotation angle is presented in the form of a mathematical model. Experiments with a feed rate of 1 mm/min confirm that spiral feeding ECM is feasible and efficient. Compared with radial ECM, the allowance differences in blank back and blank basin decrease by 32.7% and 33.6%, respectively. The surface roughnesses Ra in blank back, blank basin, and hub are 0.358, 0.308, and 0.102 µm, respectively. Thus, the allowance distribution is improved to be more uniform considerably and the surface quality is relatively high.     

Influence of cryogenic coolant on turning performance characteristics: A comparison with wet machining

Machining of 17-4 Precipitation Hardenable Stainless Steel (PH SS) is one of the difficult tasks because of its high cutting temperatures. Conventional cutting fluids are used to overcome the high cutting temperatures, but these are not acceptable from the health and environmental sustainable points of view. Cryogenic cooling is one of the potential techniques to overcome such problems. In the current work, comparison is made of cryogenic turning results, such as tool flank wear, cutting forces (feed force, main cutting force), cutting temperature, chip morphology and surface integrity characteristics with wet machining during machining of heat-treated 17-4 PH SS. The result showed that in cryogenic machining, a maximum of 53%, 78%, 35% and 16% reductions was observed in tool flank wear, cutting temperature, surface roughness and cutting force, respectively, when compared with wet machining. It was also evident from the experimental results that cryogenic machining significantly improved the machining performance and product quality even at high feed rates.