基于综合因子的H.264码率控制算法

针对H.264的JVT-G012算法在帧层对未编码的P帧采用平均分配比特、忽略了图像复杂度和P帧在图像组(Group of pictures,GOP)中的位置对码率控制影响的问题,提出了一种新的H.264码率控制算法,先利用P帧的图像复杂度和P帧在GOP中位置组成的综合因子来调整P帧的目标比特分配,再利用已编码帧的历史信息来调整当前编码帧的量化参数.通过实验表明,与JVT-G012算法相比,本文算法不仅提高了视频图像的质量,尤其是运动剧烈和纹理复杂的视频序列的图像质量,而且使得输出的实际码率更接近目标码率,提高了码率控制的精准性;与已有算法相比,在保持视频图像质量的情况下,进一步提高了码率控制的精准性.     

基于ESDA的山西省县域经济增长差异分析

采用ESDA技术,通过考察2001年~2010年山西省县域人均GDP增长率的空间分布特征及其动态变化,发现2001年~2010年山西省各地区人均GDP增长速度表现出显著的空间正相关。人均GDP增长速度聚集区的空间分布随时间的变化而变化,主要为HH类型和LL类型。     

Attainability of the minimum data rate for stabilization of linear systems via logarithmic quantization

This paper investigates the attainability of the minimum average data rate for stabilization of linear systems via logarithmic quantization. It is shown that a finite-level logarithmic quantizer suffices to approach the well-known minimum average data rate for stabilizing an unstable linear discrete-time system under two basic network configurations. In particular, we derive explicit finite-level logarithmic quantizers and the corresponding controllers to approach the minimum average data rate.     

Flow analysis of a ribbed helix lip seal with consideration of fluid–structure interaction

Ribbed helix lip seals for rotating shafts have been widely used to retain oil and exclude contaminants in many applications throughout the industry. The objective of this study is to better understand the basic flow behavior associated with the pumping process of a ribbed helix lip seal. The theoretical model consists of a flow analysis of the lubricating film of the hydraulic fluid in conjunction with a stress analysis of the lip seal distortion. The complicated mechanical interaction between the oil flow and rubber deformation was simulated using a coupled fluid–structure approach implemented in a commercial computational fluid dynamics (CFD) code ESI-CFD, ACE+®. The flow characteristics and rubber deformation around a ribbed helix lip seal were fully resolved in a pumping-rate test environment, where both air and oil sides were filled with oil initially. The three-dimensional pressure field solved by the model via the coupled flow-stress analysis was compared with the predictions obtained from the model via the nondeformable rubber assumption to elucidate the significant effect of the fluid–structure interaction on accurate simulation of the oil pumping behavior. In the rotating speed ranging from 1000 to 6000 rpm, both measured and calculated pumping rates increase with the shaft speed for a ribbed helix lip seal. As compared to the baseline case, calculations with considering the fluid–structure interaction at higher rotary speeds can result in thicker oil films, and in turn produce greater pumping rates.     

Forest biomass mapping from lidar and radar synergies

The use of lidar and radar instruments to measure forest structure attributes such as height and biomass at global scales is being considered for a future Earth Observation satellite mission, DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice). Large footprint lidar makes a direct measurement of the heights of scatterers in the illuminated footprint and can yield accurate information about the vertical profile of the canopy within lidar footprint samples. Synthetic Aperture Radar (SAR) is known to sense the canopy volume, especially at longer wavelengths and provides image data. Methods for biomass mapping by a combination of lidar sampling and radar mapping need to be developed.In this study, several issues in this respect were investigated using aircraft borne lidar and SAR data in Howland, Maine, USA. The stepwise regression selected the height indices rh50 and rh75 of the Laser Vegetation Imaging Sensor (LVIS) data for predicting field measured biomass with a R² of 0.71 and RMSE of 31.33 Mg/ha. The above-ground biomass map generated from this regression model was considered to represent the true biomass of the area and was used as a reference map since no better biomass map exists for the area. Random samples were taken from the biomass map and the correlation between the sampled biomass and co-located SAR signature was studied. The best models were used to extend the biomass from lidar samples into all forested areas in the study area, which mimics a procedure that could be used for the future DESDYnI mission. It was found that depending on the data types used (quad-pol or dual-pol) the SAR data can predict the lidar biomass samples with R² of 0.63-0.71, RMSE of 32.0-28.2 Mg/ha up to biomass levels of 200-250 Mg/ha. The mean biomass of the study area calculated from the biomass maps generated by lidar-SAR synergy was within 10% of the reference biomass map derived from LVIS data. The results from this study are preliminary, but do show the potential of the combined use of lidar samples and radar imagery for forest biomass mapping. Various issues regarding lidar/radar data synergies for biomass mapping are discussed in the paper.     

On detecting active worms with varying scan rate

Active worms have posed a major security threat to the Internet and many research efforts have focused on them. However, defending against them remains challenging due to their continuous evolution. In this paper, we study a new class of defense-oriented evolved worms, the Varying Scan Rate worm (the VSR worm in short). In order to circumvent detection by existing worm detection schemes, the VSR worm deliberately varies its scan rate according to these schemes’ weaknesses. To counteract the VSR worm, we design a new worm-detection scheme, the attack-target Distribution Entropy-based Dynamic detection scheme (DED detection for short). DED detection utilizes the attack-target distribution and robust statistical feature in conjunction with dynamic decision adaptation to distinguish worm-scan traffic from non-worm-scan traffic. We present a comparatively complete space of detection schemes and conduct extensive performance evaluations on the DED detection scheme compared with other schemes, using real-world Internet traces as background scan traffic. Our data clearly demonstrate the effectiveness of the DED detection scheme in detecting both the VSR worm and the traditional worm.     

On the estimation of adequate test set size using fault failure rates

Test set size in terms of the number of test cases is an important consideration when testing software systems. Using too few test cases might result in poor fault detection and using too many might be very expensive and suffer from redundancy. We define the failure rate of a program as the fraction of test cases in an available test pool that result in execution failure on that program. This paper investigates the relationship between failure rates and the number of test cases required to detect the faults. Our experiments based on 11 sets of C programs suggest that an accurate estimation of failure rates of potential fault(s) in a program can provide a reliable estimate of adequate test set size with respect to fault detection and should therefore be one of the factors kept in mind during test set construction. Furthermore, the model proposed herein is fairly robust to incorrect estimations in failure rates and can still provide good predictive quality. Experiments are also performed to observe the relationship between multiple faults present in the same program using the concept of a failure rate. When predicting the effectiveness against a program with multiple faults, results indicate that not knowing the number of faults in the program is not a significant concern, as the predictive quality is typically not affected adversely.     

Exploring Non‐Linear Relationship of Blendshape Facial Animation

Human face is a complex biomechanical system and non‐linearity is a remarkable feature of facial expressions. However, in blendshape animation, facial expression space is linearized by regarding linear relationship between blending weights and deformed face geometry. This results in the loss of reality in facial animation. To synthesize more realistic facial animation, aforementioned relationship should be non‐linear to allow the greatest generality and fidelity of facial expressions. Unfortunately, few existing works pay attention to the topic about how to measure the non‐linear relationship. In this paper, we propose an optimization scheme that automatically explores the non‐linear relationship of blendshape facial animation from captured facial expressions. Experiments show that the explored non‐linear relationship is consistent with the non‐linearity of facial expressions soundly and is able to synthesize more realistic facial animation than the linear one.     

Input-output properties of the Page-Hinkley detector

We consider the stochastic input-output properties of a simple non-linear dynamical system, the so-called Page-Hinkley detector, playing a key role in change detection, and also in queuing theory. We show that for L-mixing inputs with negative expectation the output process of this system is L-mixing. The result is applied to get an upper bound for the false alarm rate. The proof is then adapted to get a similar result for the case of random i.i.d. inputs. Possible extensions and open problems are given in the discussion.     

Simulation-based two-stage estimation for multiple nonparametric regression

To reduce the curse of dimensionality arising from nonparametric estimation procedures for multiple nonparametric regression, in this paper we suggest a simulation-based two-stage estimation. We first introduce a simulation-based method to decompose the multiple nonparametric regression into two parts. The first part can be estimated with the parametric convergence rate and the second part is small enough so that it can be approximated by orthogonal basis functions with a small trade-off parameter. Then the linear combination of the first and second step estimators results in a two-stage estimator for the multiple regression function. Our method does not need any specified structural assumption on the regression function and it is proved that the newly proposed estimation is always consistent even if the trade-off parameter is designed to be small. Thus when the common nonparametric estimator such as local linear smoothing collapses because of the curse of dimensionality, our estimator still works well.