木材用交联型醋丙胶粘剂的研制

研制一种由醋酸乙烯、丙烯酸丁酯、特种单体共聚而成的水性交联型环保胶粘剂以替代目前广泛使用的氨基树脂,适应绿色环保要求。     

Copolymerization in UF/pMDI adhesives networks

Kinetic evidence in thermomechanical analysis experiments and carbon‐13 nuclear magnetic resonance spectroscopy (¹³C NMR) evidence indicates that the strength of a joint bonded with UF (urea–formaldehyde)/polymeric 4,4'‐diphenylmethane diisocyanate (pMDI) glue mixes is improved by coreaction of the methylol groups of UF resins with pMDI to form a certain number of methylene cross‐links. The formation of these methylene cross‐links is predominant, rather than formation of urethane bridges which still appear to form but which are in great minority. This reaction occurs in presence of water and under the predominantly acid hardening conditions, which is characteristic of aminoplastic resins (thus, in presence of a hardener). Coreaction occurs to a much lesser extent under alkaline conditions (hence, without UF resins hardeners). The predominant reaction is then different in UF/pMDI adhesive systems than that observed in phenol‐formaldehyde (PF)/pMDI adhesive systems. The same reaction observed for UF/pMDI system at higher temperatures has also been observed in PF/pMDI systems, but only at lower temperatures. The water introduced in the UF/pMDI mix by addition of the UF resin solution has been shown not to react with pMDI to an extent such as to contribute much, if at all, to the increase in strength of the hardened adhesive. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3681–3688, 2002     

Significance of Wood Terpenoids in the Resistance of Scots Pine Provenances Against the Old House Borer, Hylotrupes bajulus, and Brown-Rot Fungus, Coniophora puteana

We tested how terpenoid (i.e., monoterpenes and resin acids) composition and concentration in wood affects resistance against wood-borers and decaying fungi. Scots pine (Pinus sylvestris) wood from nine provenances having variable terpenoid profiles was studied against the old house borer, Hylotrupes bajulus, and the decay fungus, Coniophora puteana. Provenances represented a 1200-km N-S transect from Estonia to northern Finland, but they were all cultivated for 7 years in the same nursery field, in central Finland. Mean relative growth rate (MRGR) of small H. hajulus larvae positively correlated with the total monoterpene concentration of wood, and feeding was associated with high proportion of levopimaric+palustric acid in wood. Provenance did not affect the MRGR of small or big larvae, but big larvae consumed more wood and produced more frass on the northern Ylitornio trees than on the southern Rakvere and Ruokolahti trees. Low beta-pinene and total monoterpene concentration and low beta: alpha-pinene ratio in wood were all associated with a high number of eggs. The most northern Muonio provenance was the most favored as an oviposition site, differing significantly from Saaremaa, Tenhola, and Suomussalmi. Wood from Saaremaa, Tenhola, Ruokolahti, and Suomussalmi provenance was most resistant against decay fungus, differing significantly from that of Kinnula provenance. However, decay resistance was not clearly associated with the concentrations of wood terpenoids. These results suggest that monoterpene composition of wood affects resistance against wood-boring Cerambycid beetles, but resistance against wood-decaying fungi is not as clearly associated with wood terpenoids.     

Comparing the Variation of Needle and Wood Terpenoids in Scots Pine Provenances

We determined variation in both the concentration and composition of terpenoids in needles and wood within nine Scots pine (Pinus sylvestris) provenances. Seedlings of different provenances representing a 1200-km N–S transect from Estonia to northern Finland were cultivated in Suonenjoki nursery field, central Finland, for seven years. Growth of seedlings and the number of vertical resin ducts in wood were also determined. -Pinene and 3-carene were the major monoterpenes both in the needles and wood. The total monoterpene concentration was about five times higher in the needles than in the wood. A strong positive correlation was found between proportional quantities of several terpenes of the needles and wood, particularly for 3-carene, sabinene, and terpinolene. The needles contained both labdane-type and tricyclic resin acids, whereas the wood contained only tricyclic ones. The wood had a four times higher tricyclic resin acid concentration than the needles. The highest total monoterpene concentration in the needles and in the wood occurred in the most northern Muonio provenance and in the most southern Saaremaa provenance plants, respectively. The amount of high 3-carene genotype trees decreased among the northern provenances. The wood of the most northern Muonio provenance showed the lowest total resin acid concentration, but provenance did not affect total tricyclic resin acids in the needles. Korpilahti provenance trees from central Finland had the best growth in height. In addition, Korpilahti and Ruokolahti provenance trees showed largest radial growth of stem and smallest number of vertical resin ducts. The results suggest that especially the proportional quantity of 3-carene in the needles could be used in estimating the amount of this compound in the wood and vice versa.     

利用微波介电加热和微波干燥水解法制备TiO2微粒

利用微波介电加热和微波干燥条件下TiCl4直接水解的方法制备出平均尺寸为40m，粒径分布窄，均为球形且形态均一，团聚较少，金红石型的TiO2纳米粒子，其内部品粒平均大小为17nm。而传统加热和干燥条件下形成的纳米微粒平均为60nm，粒经大小不均一，形态较不规则，团聚严重。微波加热和干燥方法具有清洁、快速均匀高效、环境友好的优点，推广前景良好。TiCl4水解法经济便利，适于工业化生产。     

Energy Aspects in Drying

The energy performance of a dryer and a drying process is characterized by various indices such as volumetric evaporation rate, steam consumption, unit heat consumption and energy (thermal) efficiency. Of all indices, energy efficiency is the most frequently quoted, in technical specifications. A thorough analysis of available information, including the Handbook of Industrial Drying, points to the inconsistency of terminology, definition and data interpretation. Thus, reported data on energy efficiency vary significantly and frequently contradict both drying theory and industrial practice. To establish a common platform to deal with energy issues, this article provides a concise overview of the most common definitions of energy efficiency, along with a critical review of the published data. A need for energy audit and benchmarking is pointed out. To eliminate shortcomings of the energy efficiency as a lumped parameter, and to allow analysis of energy consumption over time (batch drying) or distance (continuous drying), instantaneous and cumulative indices are proposed. Using these indices, the energy performance of selected dryers is examined, and possible modifications to dryer design and operating parameters are indicated in order to reduce the overall energy consumption.     

环保型反应性乳化剂在水性木器乳液聚合中的应用

介绍了环保型反应性乳化剂ADEKA?REASOAP?SR-10、ER-30的结构和特性,重点分析了反应性乳化剂在水性木器乳液聚合中的应用及其对聚合物性能的影响。实验证明,应用反应性乳化剂所得的聚合物性能要远远优于非反应性乳化剂所得聚合物性能,而且应用了非离子反应性乳化剂所得的聚合物性能要优于单独使用阴离子反应性乳化剂所得聚合物性能。最后预测了环保型反应性乳化剂的良好应用前景。     

Varnish layer hardness of oriental beech (fagus orientalist L.) wood as affected by impregnation and bleaching

The impacts of impregnation and bleaching on the varnish layer hardness of Oriental beech (Fagus orientalist L.) wood were investigated. A number of bleaching combinations {[NaOH−H₂O₂], [NaOH−Ca(OH)₂−H₂O₂], [NaOH−MgSO₄−H₂O₂] [NaHSO₃−H₂C₂O₄], [NaSiO₃−H₂O₂], [KMnO₄+NaHSO₃+H₂O₃]} were applied at 18% concentration for bleaching to both impregnated and unimpregnated specimens of Oriental beech wood. Subsequently, water-based (WB) varnish was coated over the samples and the varnish layer hardness values were determined in accordance with ASTM D 4366-95. All of the chemicals used for bleaching reduced the surface hardness. However, after varnish coating, the hardness of most samples was similar to that of the varnish-coated natural (control) samples.     

水性聚氨酯木器漆中消泡剂的选用

水性聚氨酯木器漆极易产生气泡,影响其装饰性。通过系列试验,筛选出适宜的消泡剂,并确定其最佳用量。     

Investigation of the Influence of Fillers on the Properties of Poly(vinyl acetate) Adhesives

The properties of poly(vinyl acetate) compositions prepared as potential wood adhesives were investigated. The paper presents the results of the influence of various kinds of inorganic fillers based on calcium carbonate and alumino-silicate and an organic filler, starch, on the adhesive composition properties. The comparison among rheological behavior of the adhesive dispersions concerning the specific role of fillers were made. Mechanical and relaxation properties of the adhesive films could reveal the effect of filler characteristics on the polymer matrix. The significant influences of particle size distribution and specific surface area on the poly(vinyl acetate) adhesive composition were determined, along with other filler characteristics.