食用级碱式碳酸镁生产工艺研究

研究了以工业级硫酸镁为原料生产食用级碱式碳酸镁的工艺条件及影响产品收率的主要因素。     

Effect of display location on control-display stereotype strength for translational and rotational controls with linear displays

Experiments were designed to investigate the effects of control type and display location, relative to the operator, on the strength of control/display stereotypes. The Worringham and Beringer Visual Field principle and an extension of this principle for rotary controls (Hoffmann E.R., and Chan A.H.S. 2013). “The Worringham and Beringer ‘Visual Field’ Principle for Rotary Controls. Ergonomics.” 56 (10): 1620–1624) indicated that, for a number of different control types (rotary and lever) on different planes, there should be no significant effect of the display location relative to the seated operator. Past data were surveyed and stereotype strengths listed. Experiments filled gaps where data are not available. Six different control types and seven display locations were used, as in the Frame of Reference Transformation Tool (FORT) model of Wickens et al. (Wickens, C.D., Keller, J.W., and Small, R.L. (2010). “Left. No, Right! Development of the Frame of Reference Transformation Tool (FORT).” Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting September 2010, 54: 1022–1026). Control/display arrangements with high stereotype strengths were evaluated yielding data for designers of complex control/display arrangements where the control and display are in different planes and for where the operator is moving. It was found possible to predict display/control arrangements with high stereotype strength, based on past data.

Practitioner Summary: Controls and displays in complex arrangements need to have high compatibility. These experiments provide arrangements for six different controls (rotary and translational) and seven different display locations relative to the operator.     

砂土的剪胀方程及其塑性势(Ⅰ):发展现状

以能量守恒原理为主线,在各向同性前提下,对Taylor剪胀方程、Cam-clay剪胀方程、修正Cam-clay剪胀方程、Rowe剪胀方程和扩展的Rowe剪胀方程等进行了较全面的综述.论证了剪胀方程和塑性势函数之间的相互转化关系.指出了Lade-Kim塑性势函数和Nova塑性势函数的缺陷之处,即这两个塑性势函数均没有合理耦合临界状态这一概念.     

Residual strength prediction of multiple cracked stiffened panels

Prediction of the coalescence of adjacent cracks is critical for residual strength estimation of structures under multiple site damage conditions. A methodology successfully developed for the case of crack link‐up prediction of un‐stiffened plates, is extended for the case of typical cracked stiffened aircraft panels. The proposed link‐up criterion is based on the change in the magnitudes of elastic and plastic strain energies of the stiffened panel, before and after the cracks coalesce. The strain energy magnitudes of interest are calculated using non‐linear elastic–plastic finite‐element analysis. For the application and verification of the method, experimental results from the open literature are used. Residual strength values calculated by the proposed methodology are in good agreement with the experimental results. The present criterion provides superior results when compared to the existing and commonly applied link‐up criteria.     

亚麻针织产品的酶整理工艺探讨

为改善亚麻针织物的舒适性能，探讨用生物酶整理工艺来提高其柔软性。选取酶剂浓度、pH值、温度和时间4个因素作为正交实验的因子，进行了四因素四水平的正交实验。通过对实验结果的分析，确定了合理的生物酶整理工艺条件。工艺参数分别为：酶整理温度为50℃，整理液pH值为5，酶剂浓度为2%，整理时间为60min,亚麻针织坯布经过这种优化的酶整理后柔软性改善效果十分显著。     

无碳化物贝氏体在曲轴上的应用与展望

介绍了无碳化物贝氏体钢的特点、合金化原理、获得方法和在曲轴上的应用前景。     

Development of grain boundary allotriomorphic ferrite/granular bainite duplex steel

A new hot-rolled low alloy high strength steel with grain boundary allotriomorphic ferrite/granular bainite duplex micro-structure has been developed through novel microstructure and alloying designs without any noble metal elements such as nickel and molybdenum. Its as-rolled microstructure and mechanical properties, fatigue crack propagation behavior compared with single granular bainitic steel as well as continuous cooling transformation, were investigated in detail. The measured result of CCT (continuous cooling transformation) curve shows that such duplex microstructure can be easily obtained within a wide air-cooling rate range. More importantly, this duplex microstructure has much better combination of toughness and strength than the single granular bainite microstructure. It is found that the grain boundary allotriomorphic ferrite in this duplex microstructure can blunt the rni-crocrack tip, cause fatigue crack propagation route branching and curving, and thus it increases the resistance to fati     

高强混凝土T形截面双向压弯构件承载力的研究

对9根T形截面高强混凝土双向压弯构件进行试验研究,揭示了这类构件的破坏形态,并进一步分析T形截面正截面承载力的变化规律.