大庆重油催化裂化装置现状及改进措施

介绍了大庆石油化工总厂重油催化裂化装置的技术特点和目前国内外催化裂化装置能耗，物耗，开工周期、轻油收率、转化率、加工损失及辛烷值水平现状。通过与先进水平的对比分析，提出大庆石油化工总厂重油催化裂化装置存在的差距及改进措施。     

SCLC法测量非晶硅有效隙态密度

提出了用空间电荷限制电流（SCLC）法测量非晶硅材料的有效隙态密度的新方法，并且报告了用4061A型半导体综合测试仪测量有效隙态密度的结果。测量结果发现与用低频电容法所得结果相符。     

Multimodel analysis and controller design for nonlinear processes

Multimodel analysis and controller design for nonlinear processes via gap metric is discussed. It is shown that the loop-shaping H_∞ approach can integrate the procedure of selecting operating points and the local controller design. The local controllers can guarantee not only stability but also performance specified by the pre- and/or post-compensators. Thus, at each operating points, local controllers can have similar performance, and the global performance of the system can be predicted.     

Driving a Wedge Between Evidence and Beliefs: How Online Ideological News Exposure Promotes Political Misperceptions

This article has 2 goals: to provide additional evidence that exposure to ideological online news media contributes to political misperceptions, and to test 3 forms this media‐effect might take. Analyses are based on representative survey data collected during the 2012 U.S. presidential election (N = 1,004). Panel data offer persuasive evidence that biased news site use promotes inaccurate beliefs, while cross‐sectional data provide insight into the nature of these effects. There is no evidence that exposure to ideological media reduces awareness of politically unfavorable evidence, though in some circumstances biased media do promote misunderstandings of it. The strongest and most consistent influence of ideological media exposure is to encourage inaccurate beliefs regardless of what consumers know of the evidence.     

间隙度量与跟踪系统中的鲁棒控制器设计

为定量研究鲁棒控制器允许对象有尽可能大的不确定性.在引入间隙度量的基础上,定义了跟踪系统鲁棒控制器的鲁棒边界,并对某跟踪系统设计了基于间隙度量的鲁棒控制器.该控制器能兼顾对象的不确定性与控制器的不确定性.由仿真结果可以看出,与普通的PID控制器相比,具有较大鲁棒边界的鲁棒控制器不仅具有较强的干扰抑制能力.而且能够在模型加性不确定性存在的情况下具有很好的跟踪性能.     

Online phenotype discovery based on minimum classification error model

Identifying and validating novel phenotypes from images inputting online is a major challenge against high-content RNA interference (RNAi) screening. Newly discovered phenotypes should be visually distinct from existing ones and make biological sense. An online phenotype discovery method featuring adaptive phenotype modeling and iterative cluster merging using improved gap statistics is proposed. Clustering results based on compactness criteria and Gaussian mixture models (GMM) for existing phenotypes iteratively modify each other by multiple hypothesis test and model optimization based on minimum classification error (MCE). The method works well on discovering new phenotypes adaptively when applied to both of synthetic datasets and RNAi high content screen (HCS) images with ground truth labels.     

HSV-tk基因/GCV系统治疗肿瘤的旁观者效应与缝隙连接关系的研究

目的 探讨单纯疱疹病毒胸苷激酶（HSV－tk）基因／丙氧鸟苷（GCV）系统杀伤肿瘤细胞时旁观者效应与细胞间缝隙连接的关系。方法 用PA317细胞包装STK质粒（逆转录病毒载体介导的HSV-tk基因），形成假逆转录病毒颗粒，转染有缝隙连接的大鼠胶质瘤细胞C6和无缝隙连接的入宫颈癌细胞 Hela，制成 C6 tk+和 Helatk+细胞，将不同比例的C6和 C6 tk+、Hela和 Hela tk+细胞混合，每种比例8孔，培养 24h后 4孔加入含0．5μg/mlGCV的培养基，4孔作对照，6d后用MTT法测量细胞存活率。在两个培养皿中放入周围粘有33mm高滤纸的载玻片，分别接种 C6、C6 tk+细胞。细胞 80%汇合后将载玻片互换，并加入含0．5μg/ml GCV的培养基，6d后观察细胞形态。结果C6细胞组存在旁观者效应，Heal细胞组不存在旁观者效应。培养皿中tk+细胞大部分被杀死,tk-细胞无变化。结论HSV-tk基因/GCV系统杀伤肿瘤细胞时旁观者效应与细胞间缝隙连接有关。     

大电流真空电弧特性的研究与分析

本文分析并介绍了大电流时纵向磁场，触头开距，触头半径等对电弧特性的影响，可为高压大容量直空断路器设计提供参考。     

Y3系列三相异步电动机设计--冷轧硅钢片冲模模具间隙的选取

模具间隙是决定冲片质量的主要因素之一,根据冷轧硅钢片的机械性能,提出了选取冷轧硅钢片冲模模具间隙的方案.     

A Study of the flow phenomenon of water in a channel with flat plate obstruction geometry at the entry

The flow ina parallel walled test channel, when obstructed with a geometry at the entrance, can be forward, reverse and stagnant depending on the position of the obstruction. This interesting flow phenomenon has potential benefit in the control of energy and various flows in the process industry. In this experiment, the flat plate obstruction geometry was used as an obstruction at the entry of the test channel. The parameters that influence the flow inside and around the test channel were the gap (g) between the test channel and the obstruction geometry, the length (L) of the test channel and the Reynolds number (Re). The effect of the gap to channel width ratio (g/w) on the magnitude of the velocity ratio (V₁/V₀ : velocity inside/ velocity outside the test channel) was investigated for a range of Reynolds numbers. The maximum reverse flow observed was nearly 20% to 60% of the outside velocity for Reynolds number ranging from 1000 to 9000 at g/w ratio of 1.5. The maximum forward velocity inside the test channel was found 80% of the outside velocity at higher g/w ratio of 8. The effect of the test channel length on the velocity ratio was investigated for different g/w ratios and a fixed Reynolds number of 4000. The influence of the Reynolds number on the velocity ratio is also discussed and presented for different gap to width ratio (g/w). The flow visualisation photo-graphs showing fluid motion inside and around the test channel are also presented and discussed.