Energy and economic analysis of a hydrogen and ammonia co-generation system based on double chemical looping

In this work, a model of hydrogen production by double chemical looping is introduced. The efficiency benefit obtained was investigated. The chemical looping hydrogen generation unit is connected in series to the downstream of a chemical looping gasification unit as an additional system for 100 MW·h coal gasification, with the function of supplementary combustion to produce hydrogen. Using Aspen Plus software for process simulation, the production of H_2 and N_2 in the series system is higher than that in the independent Chemical looping gasification and Chemical looping hydrogen generation systems, and the production of hydrogen is approximately 25.63% and 12.90% higher, respectively; The study found that when the gasification temperature is 900 °C, steam-carbon ratio is 0.84 and oxygen-carbon ratio is 1.5,the hydrogen production rate of the system was the maximum. At the same time, through heat exchange between logistics, high-pressure steam at 8.010×10~4 kg·h~(-1) and medium-pressure steam at 1.101×10~4 kg·h~(-1) are generated, and utility consumption is reduced by 61.58%, with utility costs decreasing by 48.69%. An economic estimation study found that the production cost of ammonia is 108.66 USD·(t NH_3)~(-1). Finally, cost of equipment is the main factors influencing ammonia production cost were proposed by sensitivity analysis.     

稀土镁对铸态高锰钢机械性能的影响

实验了稀土镁对铸态高锰钢机械性能的影响．结果表明，在一定的Ｃ、Ｍｎ、Ｓｉ成分中，加入ＲＥＭｇ合金均使其铸态机械性能有所提高．同时在工业设备上试验证实，加入ＲＥＭｇ的某种成分之高锰钢，在铸态时其耐磨性能、机械性能均已达ＺＧＭｎ１３－１和ＺＧＭｎ１３－２（ＧＢ５６８０－８５）水平并超过了铸态使用的７５Ｍｎ１３     

无润滑空气压缩机冷却水系统的清洗

介绍了无润滑空气压缩机冷却水系统结垢的危害性，阐述了清洗的原理，提出了清洗时应注意的工艺参数，操作时的注意事项和由此带来的经济效益。     

Agroecological analysis and economic benefit of organic resources and fertiliser in till and no-till sorghum production after a 6-year fallow in semi-arid West Africa

A field experiment was conducted in Gampela (Burkina Faso) in 2000 and 2001 to assess the impact of organic and mineral sources of nutrients and combinations thereof in optimising crop production in till and no-till systems and to assess the economic benefit of these options. The study showed that under conditions of rainfall deficiency, the use of a single organic resource at an equivalent dose of 40 kg N ha⁻¹ better secured crop yield than the application of an equivalent amount as urea-N, while a combination of organic resources and fertiliser was better in increasing crop yield than the application of the same N amount in the form of urea. In a year of rainfall deficiency, a mix of organic resources and fertiliser in both till and no-till systems increased crop water use efficiency, with the result that the farmer was able to purchase only half of the normal quantity of N fertiliser to obtain a higher yield that he would have done when all of the N was supplied in the form of urea. Under conditions where soil N is deficient, an economic benefit was achieved when urea was combined with easily decomposable organic material (e.g. sheep dung); mixing the urea at a dose of 40 kg N ha⁻¹ with maize straw was not sufficient in alleviating the negative interaction due to the enhanced N immobilisation. The results demonstrate that the use of N fertiliser alone was risky and that a higher yield, with the accompanying economic benefit, was scarcely achieved under the prevailing rainfall conditions. The application of soil and water conservation measures can contribute greatly to increasing the economic benefit of mineral, organic or combined organic and mineral-derived nutrient application under semi-arid conditions.     

TAM胶粘剂中铅镉汞铬砷有害元素的同时测定

研究了HF +HCl消解样品 ,试液用ICP -AES法同时测定TAM胶粘剂中铅、镉、汞、铬、砷的新方法。在选定的最佳条件下测铅、镉、汞、铬、砷的检出限分别为 0 .0 0 15、0 .0 0 0 8、0 .0 0 11、0 .0 0 17、0 .0 0 0 9μg·L- 1 ,回收率为 93 .5 %～ 10 8.3 % ,RSD为 0 .62 %～ 5 .65 %。该法准确、快速、简便 ,应用于TAM胶粘剂的测定 ,结果满意     

Consistent hierarchical economic NMPC for a class of hybrid systems using neighboring-extremal updates

A hierarchical two-layer control algorithm is developed for a class of hybrid (discrete-continuous dynamic) systems to support economically optimal operation of batch or continuous processes with a predefined production schedule. For this class of hybrid systems, the optimal control moves as well as the controlled switching times between two adjacent modes are determined online. In contrast to closely related schemes for integrated scheduling and control, the sequence of modes is not optimized. On the upper layer, the economic optimal control problem is solved rigorously by a slow hybrid economic model predictive controller at a low sampling rate. On the lower layer, a fast hybrid neighboring-extremal controller is based on the same economic optimal control problem as the slow controller to ensure consistency between both layers. The fast neighboring-extremal controller updates rather than tracks the optimal trajectories from the upper layer to account for disturbances. Consequently, the fast controller steers the process to its operational bounds under disturbances and the economic potential of the process is exploited anytime. The suggested two-layer control algorithm provides fully consistent control action on the fast and slow time-scale and thus avoids performance degradation and even infeasibilities which are commonly encountered if inconsistent optimal control problems are formulated and solved.     

A tutorial review of economic model predictive control methods

An overview of the recent results on economic model predictive control (EMPC) is presented and discussed addressing both closed-loop stability and performance for nonlinear systems. A chemical process example is used to provide a demonstration of a few of the various approaches. The paper concludes with a brief discussion of the current status of EMPC and future research directions to promote and stimulate further research potential in this area.     

Fast economic model predictive control based on NLP-sensitivities

This study adapts the advanced step NMPC framework to Economic NMPC. Here, sufficient conditions for nominal stability are derived for NMPC controllers that incorporate economic stage costs with appropriate regularization. To guarantee these conditions, we derive a constructive strategy to calculate the regularization term directly. Moreover, we extend the sensitivity components in the advanced step NMPC framework to consider a rigorous path-following algorithm. This approach accounts for active set changes and allows much weaker constraint qualifications. Moreover, using an ℓ₁ formulation of the NMPC problem satisfies these constraint qualifications and allows more reliable solution of the moving horizon optimization problem, even in the presence of noise. Finally, all of these concepts are demonstrated on a detailed case study with a continuously stirred tank reactor.     

On the performance of economic model predictive control with self-tuning terminal cost

In this paper, we analyze the closed-loop performance of a recently introduced economic model predictive control (MPC) scheme with self-tuning terminal cost. To this end, we propose to use a generalized terminal region constraint instead of a generalized terminal equality constraint within the repeatedly solved optimization problem, which allows us to obtain improved closed-loop asymptotic average performance bounds. In particular, these bounds can be obtained a priori. We discuss how the necessary parameters for the generalized terminal region setting can be calculated, and we illustrate our findings with two numerical examples.     

Ozone in the Laundry Industry—Practical Experiences in the United Kingdom

Since the early 1990s, the use of ozone in many commercial and industrial laundering applications has been evolving rapidly. Ozone allows washing to be conducted using cold water, thereby saving considerable heat energy and water consumption. Additionally, ozone enhances the wash process, resulting in a significant reduction in detergent dosage and number of rinses, thus saving water. Ozone/cold water cycles are gentler to fabrics, thus extending linen life. Finally, ozone/cold water laundering is beneficial for effluents, resulting in reductions in COD (chemical oxygen demand). Microorganisms are destroyed effectively in ozone-wash waters, and washing and drying cycles are shorter, thus saving labor. In this paper, the authors describe some specific case studies at commercial laundering installations in the UK, whereby the users of ozone have reaped major benefits, including enhanced microorganism kills/inactivation and significant cost savings.