Analytical and numerical study of the densification of carbon/carbon composites by a film-boiling chemical vapor infiltration process

The film-boiling chemical vapor infiltration (CVI) process is a fast process developed for composite material fabrication, and especially carbon/carbon composites. In order to help define optimal conditions, a local 1D model has been developed to study the densification front which establishes itself during the processing of a carbon/carbon fibrous preform. The model features heat conduction, precursor gas diffusion, densification reactions and structural evolution of the porous medium. The effects of total mass flux, Thiele modulus, porous medium geometry on front behavior parameters such as width, velocity and residual porosity are presented as semi-analytical correlations. An existence criterion is produced, which involves a minimal heat flux. Comparison between process-scale experiments and simulation is then possible by inserting the semi-analytical results achieved in the local study of the front into a light numerical model involving the entire preform. The model has been validated with respect to previous experimental and numerical data.     

Statistical properties of interparticle/void distance for amorphous plastics toughening

Statistical properties of interparticle/void distance (ID) for various particle/void and dispersion types are studied in relation with toughening of plastics using computer‐generated three‐dimensional models. Particle/void size groups adopted were either of constant diameter or of log‐normal distribution. Particles/voids were dispersed at uniform‐random or flocculated with multiple clusters. It was found that IDs are (a) of approximately Gaussian distribution for particles/voids of either a constant diameter or a log‐normal distribution, when they are dispersed at uniform‐random, but (b) not of Gaussian distribution for particle/void sizes of bimodal log‐normal distribution, nor for flocculated log‐normal distribution of particles/voids dispersed with multiple clusters. It was also found that the degree of ID uniformity for a single group of log‐normally sized particles/voids is not sensitive to standard deviation of particle/void size. Mixing effect on ID properties using two groups of log‐normally distributed particles/voids with similar mean particle/void diameters was simulated. It was found that, when a significant amount (36 vol %) of particles/voids of a small mean and standard deviation of ID was mixed with a group of particles/voids of a large mean and standard deviation of ID, mean and standard deviation of ID for the mixture were not substantially lower than those of the group of particles/voids of the large mean and standard deviation of ID. It was also found that the degree of ID uniformity for the mixture of the two groups was lower than those of individual groups, indicating that the mixing has deleterious effect on toughening. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4256–4262, 2006     

Dehydration of tetrahydrofuran by pervaporation using crosslinked PVA/PEI blend membranes

Dense blend membranes were prepared by blending hydrophilic polymers poly(vinyl alcohol) (PVA) and poly(ethyleneimine) (PEI), which were then crosslinked by glutaraldehyde (GA) in a mixture of solvents under the catalysis of hydrochloric acid (HCl) for the dehydration of tetrahydrofuran (THF) by pervaporation. The effect of experimental parameters such as feed water concentration, permeate pressure, and membrane thicknesses on permeate parameters, i.e., flux and selectivity were determined with feed water concentration less than 40 wt %. The membranes were found to have good potential for breaking the azeotrope of 94 wt % THF with a flux of 1.072 and 0.376 kg/m² h for plane PVA/PEI and crosslinked PVA/PEI blend membrane, which exhibited high selectivity of 156 and 579 respectively. Selectivity was found to improve with decreasing feed water concentration and increasing membrane thickness, whereas flux decreased correspondingly. High permeate pressure causes a reduction in both flux and selectivity. These effects were clearly elucidated with the aid of the known relationship among plasticization effect, degree of swelling, permeate pressure, and feed water concentration. These blend membranes were also subjected to sorption studies to evaluate the extent of interaction and degree of swelling in pure as well as binary feed mixtures. Further ion exchange capacity studies were carried out for all the crosslinked and uncrosslinked membranes to determine the total number of interacting groups present in the membranes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1152–1161, 2006     

PE-LLD／EVA／Mg（OH）2／复合阻燃剂高效无卤阻燃体系的研究

采用线形低密度聚乙烯/乙烯-醋酸乙烯共聚物作为复合材料主体,表面处理过的氢氧化镁(Mg(OH)2)为主阻燃剂,以微胶囊化红磷和自制硅类阻燃剂为核心的复合阻燃剂为阻燃增效剂,重点探讨了Mg(OH)2和复合阻燃剂的阻燃效果。结果表明,Mg(OH)2与复合阻燃剂并用具有良好的协同效应,当Mg(OH)2用量40份,复合阻燃剂5～7份时,可获得较高的氧指数,垂直燃烧试验通过FV0级,且材料抗静电能力提高,力学性能、加工性能较好。     

P(MMA-DBMEA)乳液聚合研究

甲基丙烯酸甲酯 ( MMA)在无皂乳化剂条件下 ,加入少量的功能性单体 N,N一二甲基 ,N-丁基 ,N-甲基丙烯酰氧乙基溴化铵 ( DBMEA) ,合成了稳定的 P( MMA-DBMEA)共聚物乳液 .该共聚物乳胶粒呈现单分散分布。同时用 NMR研究了共聚物 ,并对 P( MMA-DBMEA)聚合物13 C进行了全归属。     

马来酸酐接枝聚丙烯增容聚丙烯/碳酸钙复合物力学性能与增容机理

用在50L固相接枝反应器中合成的马来酸酐接枝聚丙烯(PP-g-MAH)作界面改性剂，制备了马来酸酐接枝聚丙烯／聚丙烯／碳酸钙(i-PP／PP-g-MAH／CaCO3)复合材料。研究了i-PP／PP-g-MAH／CaCO3复合材料的力学性能和增容机理。结果表明，PP-g-MAH对i-PP／CaCO3复合物的缺口冲击强度、弯曲强度和拉伸强度均有提高；PP-g-MAH与CaCO3反应形成PP-g-MAH的钙盐，实现反应性增容。     

Structures and allelopathic effects ofNuphar alkaloids: Nupharolutine and 6,6′-dihydroxythiobinupharidine

Two of the majorNuphar alkaloids, nupharolutine and 6,6-dihydroxythiobinupharidine, were isolated from the aquatic perennial herbNuphar lutea (L.) Sibth. & Sm., yellow water lily. In a lettuce seedling bioassay of the two pure compounds, the former was inactive and the latter was highly inhibitory of radicle elongation at concentrations greater than 2 ppm. Structures and stereochemistry of the two compounds were confirmed by DEPT,¹H-¹H COSY,¹H-¹³C COSY, and¹H-¹H NOESY experiments.     

Solar Photocatalytic Degradation of Textile Dyes in TiO2 Suspended Solutions

The degradation and decolourization of direct dye (Everdirect supra turguoise blue, FBL), acidic dye (Isolan orange S-RL) and vat dye (Indanthren red FBB) have been investigated by solar/TiO2 process. The effects of solution pH, dye concentration, dosage of TiO2 and nano-size of TiO2 have been studied. The increase in initial pH (3, 5 and 11) and dye concentration decrease the removal rate. The treatment for FBB and FBL dye solutions is more efficient than that of S-RL.Under optimum conditions, the color removal is found to be almost complete for FBB and FBL while that of S-RL also reaches 95%. Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model (L-H model) have been fitted to the experimental data and found to correlate the adsorption patterns as well as the kinetics of the dyes studied.     

Complementarity determining region residues aspartic acid at H55, serine at H95 and tyrosines at H97 and L96 play important roles in the B72.3 antibody-TAG72 antigen interaction

Structural analysis derived from the crystallographic studyof the chimeric B72.3 antibody illustrated some major atomicinteractions between complementarity determining region (CDR)residues. For example, hydrogen bonds are formed between H35/H95,L50/H97, H53/H55 and H96/L96 respectively. These CDR residuesmay play important roles in the B72.3–TAG72 (antibody-antigen)interaction either by direct interaction with the TAG72 antigenor by maintaining a CDR loop conformation through atomic interactionsbetween CDR residues. In order to confirm these assumptions,we altered these CDR residues by site-directed mutagenesis anddetermined binding affinities of these mutant chimeric antibodiesfor the TAG72 antigen in a solid-phase radioimmunoassay. Wefound that H55, H95, H97 and L96 are important CDR residuesfor the B72.3–TAG72 interaction. Single amino acid substitutionsof aspartic acid and serine by alanine at H55 of CDR2 and atH95 of CDR3 respectively and of tyrosine by phenylalanine atH97 and L96 of CDR3, significantly reduced the binding affinityfor the TAG72 antigen by 20-, 8-, 16- and 45-fold respectively.Therefore, this study reveals some of the requirements for maintainingthe integrity of the B72.3 antibody combining sites.