水泥生产除尘效果模糊综合评价研究

文中阐述了基于层次分析的水泥生产除尘效果模糊综合评价方法。利用层次分析将复杂的决策系统分解成若干个简单的决策系统，将模糊数学应用于判别水泥生产除尘效果的优劣，使得难以量化的质量评价问题转化成定量的结果。     

X-ray microtomography (microCT) of the progression of sulfate attack of cement paste

High-resolution X-ray computed tomography (i.e., microCT or microtomography) was used to study the sulfate attack of cylinders of Type I cement paste cast with water-cement (w/c) ratios of 0.45, 0.50 and 0.60. Damage levels in samples exposed to a Na₂SO₄ solution with 10,000 ppm sulfate ion concentration were qualitatively rated from 0 (no damage) to 4 (extreme damage) based upon visual examination of the samples' exteriors and microtomography of the samples' interiors. The greater the w/c ratio, the more rapid the onset of sulfate damage. The corners of the cylinders appeared to be particularly susceptible to spalling, and damage may have continued into the cement paste by formation of subsurface cracks.     

Limestone filler cement in low w/c concrete: A rational use of energy

The effect of limestone filler (up to 20%) on the degree of hydration, the volume of hydration products, and the optimal replacement of limestone filler in cement pastes at different w/cm ratios (0.25-0.50) were investigated by using a quadratic statistical model. The results show an increase in the degree of hydration in very low w/cm ratio paste when the limestone filler content is increased. However, the largest volume of hydration products occurs for high w/cm ratio pastes, for which the available space also increases with the limestone filler content. Finally, for a given cement, the optimum limestone filler content for different w/cm ratios can be obtained by using the gel-space ratio concept.In addition, concrete mixtures (w/cm=0.30 and 0.34) were made to determine the compressive strength. The results have shown that concretes containing limestone filler cements present a small reduction of strength at 28 days improving the hydration of clinker particles in the system. The strength of concrete depends on the gel-space ratio, which takes into account all of the effects produced by limestone filler addition: the increase of the degree of hydration, the dilution, and the increase of the effective w/c ratio.     

HEC influence on cement hydration measured by conductometry

Cellulose ethers are of universal use in factory-made mortars, though their influences on mortar properties at a molecular scale are poorly understood. Recent studies dealt with the influence of hydroxyethylmethyl cellulose (HEMC) and hydroxypropylmethyl cellulose (HPMC) molecular parameters on cement hydration. It was concluded that the degree of substitution is the most relevant factor on cement hydration kinetics, contrary to the molecular weight. Nevertheless, the major role played by the substitution degree has not been verified for other types of cellulose ethers such as hydroxyethyl cellulose (HEC), which generally possesses a higher hydration retarding capacity compared to HPMC and HEMC. In this frame, a study of the impact of HEC molecular parameters on cement hydration was performed. A negligible influence of the molecular weight was observed. Moreover, the results emphasize that the hydroxyethyl group content mainly determines the delay of cement hydration.     

Effect of Nitrogen Atmosphere on the Densification of a 3-mol%-Yttria-Doped Zirconia

The densification behavior of a 3-mol%-Y₂O₃-doped ZrO₂ (3Y-ZrO₂) has been investigated under N₂ and O₂ atmospheres. Powder compacts have been sintered at 1550° and 1400°C for various times. The density of the specimen sintered at 1550°C is higher in N₂ than in O₂, while the contrary result is obtained in the case of the specimen sintered at 1400°C. Such results can be explained in terms of nitrogen solubility and oxygen vacancy in a ZrO₂ matrix. Because nitrogen solubility into the ZrO₂ increases with an increase in heat-treatment temperature, leading to the formation of oxygen vacancy, the densification rate becomes higher. The present study thus shows evidence of nitrogen solubility into the ZrO₂ and its role on the densification behavior of 3Y-ZrO₂.     

Cement-based materials for stress sensing by dielectric measurement

The self-sensing of stress by measurement of the relative dielectric constant (κ) has been shown in cement pastes containing steel fibers of 8 μm diameter and carbon filaments of 0.1 μm diameter. The κ value increases nonlinearly and quite reversibly with compressive stress up to 6.4 MPa, although the reversibility is not complete. Inferior sensing performance was observed in cement paste with carbon fibers of 15 μm diameter, although the performance was still better than cement paste without admixture.     

我国水泥技术现状及对未来的思索

我国新型干法水泥在原料综合利用和预均化、无烟煤和工业废渣的利用，环保和纯低温余热发电技术以及国产化和大型化机械装备等方面的发展已日趋成熟，加之工程招投标及建设、生产管理的规范和科学化，使得我国新型水泥生产的发展进入了快车道。新型干法生产线达标达产快，建设投资和生产耗能大大降低，单线生产规模和企业集团规模越来越大，这将预示着我国的新型干法水泥生产技术跨入世界先进水平。     

水泥中硫的高频红外分析方法研究

采用高频红外吸收法测定了水泥中硫的含量,并对样品作测定前的预处理(物理处理),在测定中选用复合型助熔剂,解决了高频感应炉中因顶吹氧气流的作用而导致的样品喷溅问题。该法可准确测定水泥中0.001％～5％的硫,回收率为98.6％～102.5％,RSD为0.78％～1.35％。     

水泥粉磨系统技术措施及技术改造的优化

水泥粉磨系统的每一个环节，如粉磨工艺、选粉机、磨机结构、研磨体级配等都有潜力可挖，均可通过技术改造优化选择使粉磨系统的能力得到充分发挥、实现优质、高产、低消耗。     

Investigation of the effects of fatty acids on the compressive strength of the concrete and the grindability of the cement

In cement industry, a great energy consumption has been observed during grinding of clinker. To reduce this consumption, some waste products have been used as grinding aids.In this investigation, the effects of sunflower oil (SO), oleic acid (OA), stearic acid (SA), myristic acid (MA) and lauric acid (LA) on the fineness and strength of the cement have been examined. These aids were added into clinker in certain ratios based on the cement clinker weight and the grinding has been done for a definite time at the same condition.All of the fatty acids used increased the fineness as compared with the cement without the grinding additives. SO and OA decreased the strength significantly, LA decreased it to a lesser extent and SA increased it definitely according to the common cement. But MA did not alter the strength of the cement as much as SA. In addition, the covering of the balls influences the grinding of cement clinker unfavourably.