区熔单晶硅生产操作指导专家系统

本文介绍区熔单晶硅生产操作指导专家系统。首先，系统实现了连续图象的自动变周期、定瞬间采样，并提出一种新的区域扩张增量图象处理算法．其次，叙述了知识的获取过程及类规则，提出分布的多库结构，并实现了不确定性推理．最后，开发了区熔单晶硅生产操作指导专家系统，实现了从数据和图象采集、处理、事实获取、推理到给出操作指导一体化。     

各国核电厂场外应急计划的比较

本文分析和比较了各国核电厂的应急计划,特别是场外应急的干予水平和应急计划区,讨论了我国干予水平、核电厂应急计划区和香港核应急计划几个实际问题。     

Influence of the Preheat Treatment on the Microstructure and Properties of X37CrMoV5-1 Steel

The technological properties of the hot-work tool steels depend on their microstructural quality induced by the production process and the heat treatment. One of the frequently applied methods to improve microstructure is preheat treatment. The treatment of carbonitriding X37CrMoV5-1 steel has been investigated in fluidized bed furnaces. Thickness and phase composition have been conducted using optical microscopy Neophot 32 and scanning microscopy, JEOL 5400, after etching in nital.     

对选矿废水综合利用的探讨

通过对金堆城钼业公司选矿废水再用于选矿作业的选矿试验，证明选矿废水循环利用是可行的，既提高了选矿浓度，又减少了对环境的污染，经济和社会效益显著。     

A new minimum zone method for evaluating flatness errors

A new minimum zone method for flatnes error analyis is proposed in this article. Based on the criteria for the minimum zone solution and strict rules for data exchange, a simple and rapid algorithm, called the control plane rotation scheme, is developed for the flatness analysis of a flat surface. Experimental work was performed, and some examples are given in terms of the minimum zone and least-squares solutions.     

A method of estimating the standard gibbs free energy of formation

Standard Gibbs free energy of formation (ΔG_f⁰), an important property needed in design calculations has been estimated using molar refraction, R_M. The linear relationships derived between ΔG_f⁰ and R_M tested with the data on 8 series of hydrocarbons at 228 compounds yielded average deviations comparable to the methods cited in recent literature. The method can be used as an alternative to the existing ones, because of its simplicity combined with reasonable accuracy.     

无间隙原子钢的微观结构特征和塑性应变比

采用Ｘ射线衍射的ＯＤＦ和ＬＰ分析技术，ＳＥＭ电子通道花样和蚀坑技术观测，研究了超深冲无间隙原子钢板的微观结构特征。结果表明：控制化学成分、保证基体纯净、优选工艺参数，促进强的γ－〈１１１〉∥Ｎ．Ｄ纤维织构的形成是获得优异成型性的关键。用ＣＭＴＰ方法，由ＯＤＦ织构数据从理论计算了塑性应变比（ｒ），表明ｒｍ值高达３．１８。文中讨论了再结晶织构形成机制。     

石灰竖窑工作衬砖蚀损机理的探讨

阐述了石灰竖窑的预热带、煅烧带和冷却带工作衬砖蚀损机理，并讨论了如何根据耐火砖性能和石灰竖窑不同区域的蚀损机理，选择耐火材料。     

微重力落塔电磁悬吊、释放技术研究

论述了微重力落塔电磁悬吊、释放、提升机构的关键技术,电磁释放过程的特性分析以及微重力落塔实际试验的情况。分析说明:悬吊、释放性能的好坏决定了试验落舱的微重力水平,也是微重力落塔试验能否成功的关键技术。