FEM analyses for influences of stress corrosion and pressure solution on THM coupling in dual-porosity rock mass

With the models of stress corrosion and pressure solution, by Yasuhara et al., two computation conditions were designed for a hypothetical nuclear waste repository in an unsaturated dual-porosity rock mass: (i) the fracture apertures are changed with the stress corrosion and pressure solution (the porosity of rock matrix is also a function of stress); (ii) the fracture apertures and the porosity of rock matrix are constants. Then the corresponding two-dimensional FEM analyses for the coupled thermohydro-mec...     

中厚板轧机工作辊失效分析及对策

介绍了济钢中厚板厂使用国外高镍铬和高铬工作辊的主要失效形式 ,并对该工作辊的断裂和裂纹产生原因进行了分析 ,同时针对所存在的问题提出了对策和具体改进措施。     

Epsilon-near-zero or mu-near-zero materials composed of dielectric photonic crystals

We theoretically demonstrate that at certain frequencies two-dimensional dielectric photonic crystals （PCs） may be regarded as either epsilon-near-zero or mu-near-zero materials. We show that the transmission through a slab of such materials upon normal incidence is normally non-unity and decays with slab thickness. However, when the incident angle increases slightly, the transmittance experiences a dramatic increase due to the Brewster effect. The combination of the tunneling and resonance effects makes such materials good candidates for almost perfect bending waveguides and cloaking in waveguides. The zero index also enables applications of focusing and directive emission. At last, the distinction between the single-zero and double-zero media is discussed. In all of the above results, the numerical simulations perfectly match with theoretical predictions from the effective medium analysis.     

Iterative ultrasonic signal and image deconvolution for estimation of the complex medium response

The ill‐conditioned inverse problem of estimating ultrasonic medium responses by deconvolution of RF signals is investigated. The primary difference between the proposed method and others is that the medium response function is assumed to be complex‐valued rather than restricted to being real‐valued. Derived from the complex medium model, complex Wiener filtering is presented, and a Hilbert transform related limitation to inverse filtering type methods is discussed. We introduce a nonparametric iterative algorithm, the least squares method with point count regularization (LSPC). The algorithm is successfully applied to simulated and experimental data and demonstrates the capability of recovering both the real and imaginary parts of the medium response. The simulation results indicate that the LSPC method can outperform Wiener filters and improve the resolution of the ultrasound system by factors as high as 3.7. Experimental results using a single element transducer and a conventional medical ultrasound system with a linear array transducer show that despite the errors in pulse estimation and the noise in the RF signals, excellent results can be obtained, demonstrating the stability and robustness of the algorithm. © 2006 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 266–277, 2005     

中速磨煤机计算中若干问题的探讨(续)

目前工程设计中对ＭＰＳ、ＨＰ等中速磨煤机的计算基本上采用制造厂商提供的规范和方法，但在相同煤质条件下，按不同厂商计算方法所得结果可能出现明显的差异；另一方面，国内用以指导中速磨计算的一些规范也存在着不够明确之处，这些情况都给中速磨的选型、工程计算带来了困难。根据工程设计实践和对电厂试验资料的分析，对中速磨煤机出力计算、煤粉细度、出口风温和风工况等问题进行了讨论，提出了一些新的见解和建议     

适用于中小型水轮机上的结构新技术

介绍了适用于中小型水轮机上的集成安装式、无水冷却和无油操作及润滑等方面的结构新技术，并说明了这些技术的应用将会带来良好的经济效益和环保效益。     

高速锯床防护罩抗冲击能力的有限元分析

利用ANSYS/LS_DYNA的动力学分析功能对GS3050型超高速数控锯床安全防护罩的抗冲击能力进行了数值分析,对刀具碎片侵彻有机玻璃的过程进行了数值模拟.结果表明,采用厚度为15 mm的改性丙烯酸脂有机玻璃作为GS3050锯床的安全防护罩是可靠的.数值分析和试验的结果吻合.     

不同介质环境条件下黏性土的分散性及其微观结构

采用碎块试验、双比重计试验、电动电位、扫描电镜等测试方法,对典型的分散性土和非分散性土在不同介质环境条件下的分散性及其微观结构特征进行了研究.研究表明,介质环境中的钠离子含量和pH值高低是决定土体是否产生分散的本质因素,两种因素缺一不可.如果土体中含有大量的钠离子,并且酸碱度呈强碱性,则土体具有分散性.通过掺加高价阳离子和酸性物质,降低土体中钠离子的相对含量和酸碱度,可对分散性土进行改良.在自然沉积条件下,分散性土的微观结构中含有较多的孔隙;而非分散性土比较密实,孔隙较少.     

Automation, work organization and skills: The case of numerical control

This paper deals with small and medium sized firms. Since the late seventies small and medium sized mechanical engineering firms in France have resorted increasingly to new technologies, and in particular to numerical control. Numerical control has introduced major changes in work organization. On the one hand it tends to reinforce the role of methods of production engineering whatever the type of numerical control may be. Programming is seldom left to the machine operators, except in the case of straightforward machining operations or in machining shops with a strong tradition of highly skilled or artisan labour. Numerical control, on the other hand, does provide more opportunity for collaboration between the workshop and the production engineers. On a workshop level it introduces a more mobile division of labour between programmers, machine setters and operators, which covers everything from the start-up of programs to the supervision of maching operations. The operator may therefore acquire new skills, but this is only possible if there are open-ended training systems available to facilitate the transmission of know-how from the programmers to the machine setters and from the machine setters to the operators, and vice versa. Small and medium sized firms would appear to have a special role to play in developing skills.     

木醋杆菌发酵生产细菌纤维素的研究

利用木醋杆菌为实验菌种合成细菌纤维素,通过正交实验和单因素实验优化发酵培养基配方,确定了最佳制备条件,并利用扫描电镜、红外光谱对合成细菌纤维素的微结构进行了观察分析。