钢结构稳定设计——理论与实践

本文提出了实际工程结构的非线性理论设计和分析方法(NIDA),并以澳门回归纪念馆的设计为例,展示了本方法的优越性.在设计过程中,设计者无需假设K系数和有效长度,在结构分析完成后便可迅速完成设计,因此本文提出的方法既经济又便利.尽管对于钢框架在往复荷载及动力荷载作用下的弹塑性大位移分析已经非常成熟,但本文的方法开创了结构的非线性分析及设计的新纪元,能够对现行的设计方法理论起到巨大的推动作用.     

Large-scale cooling towers as part of an efficient and cleaner energy generating technology

The present paper will outline the main aspects of the design and construction of cooling towers in Germany in the last decade. As part of electricity generating power plants, cooling towers play a significant role for the availability of reliable energy supplies, in a manner compatible with environmental requirements. They definitely belong to the largest and thinnest concrete structures at present. Because of the combined action of wind, thermal and moisture effects, special care has to be taken with regard to fatigue, cracking and corrosion to ensure an adequate level of safety and durability. Such a design strategy has been employed for the world’s tallest cooling tower at the Niederaussem power plant in Germany, with an overall height of 200 m and thickness values of 22–24 cm. Special considerations included the realistic non-axisymmetric distribution of soil characteristics, wind action due to interference effects (as determined by wind-tunnel tests), optimisation of the shell shape to improve structural and dynamic behaviour, injection of the cleaned flue-gas into the cooling tower, and the use of high-performance concrete (85 MPa) to improve shell resistance against acid attack by the cleaned flue-gas. The paper will present some results of an actual research project on this problem, which was conducted at the University of Wuppertal, to explore the use of high-performance concrete on design, stability and durability of cooling tower shells.     

掺炼糠醛抽出油生产高质量沥青

掺炼糠醛抽出油，改变了丙烷脱沥青装置原料性质，通过调整部分操作参数，可提高轻脱油和重脱油的收率，改善脱油沥青质量，直接生产出合格的高标号道路沥青。     

高温高压下多种气体在储层岩心中吸附等温线的测定

利用自行研制的XF1型高温高压气体吸脱附测试仪,结合一台色谱分析仪(HP6890),一套抽真空系统,分别测定了N₂、CH₄、C₂H₆、C₃H₈、nC₄及其混合气体在三个岩心中的吸脱附等温线共计42条(单组分30条,累计测试点516个;混合气12条,累计测试点203个),以及吸附平衡后混合气的自由气相组成、吸附相组成和各组分的吸附等温线各48条(累计测试点431个).测试的温度为50.5℃.实验结果表明:①储层岩心介质对烃类气体的吸附现象是客观存在的,不容忽视;②仅就测试所得的数据来看,如果忽略其它因素,可以初步估计,不考虑吸附的砂岩储层气藏的计算储量将比考虑吸附少5%以上;③岩心-气体吸附体系的吸附能力除受压力影响外,更受到储层介质、岩石成分、结构和物性性质的影响,除此之外,还受到多组分气体中重烃组分数目、摩尔含量等的影响;④多组分气体组分相对吸附量能有效地表征多组分气体中各组分气体的竞争吸附能力大小,依据这个指标可将五元多组分气体体系中各组分气体按其竞争吸附能力由强到弱排序为nC₄>C₃H₈>C₂H₆>CH₄>N₂.     

欢喜岭SBS改性沥青的性能

采用适当的生产工艺，选择不同牌号的欢喜岭重交通道路沥青对几种SBS改性剂的配伍性进行考察，从中优选出配伍性好的改性剂，生产两种类型的改性沥青，一种是基于现场改性不添加稳定剂的改性沥青；另一和中是稳定性较好能长期储存的改性沥青。两种改性沥青经使用性能评定具有优良的使用性能。     

填充料细度对水工沥青混凝土性能的影响

近年来沥青混凝土作为防渗材料，在我国水工建筑中得到了广泛应用。与道路工程的沥青混凝土不同的是，水工沥青混凝土具有良好的粘弹性及抗渗性。目前，国家规范对填充料的细度尚无明确规定，通过调整沥青混凝土的填充料细工，对沥青混凝土的各项性能进行了系统的试验和分析，研究表明：适宜的填充料细度及掺量，能有效地改善沥青混凝土性能，提高其抗渗性。     

钢纤维混凝土轴拉应力-应变特性的试验研究

本文采用环氧粘接法对4种纤维混凝土材料进行了轴向拉伸试验，成功地获得了材料的应力-应变全曲线。根据其试验曲线是否出现第二峰值，把纤维分为增强与增韧两大类。通过分析表明：不同的纤维形式对混凝土材料的作用机理有较大的差异。在工程应用中，应根据纤维混凝土材料的用途来选择纤维类型。     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

论基于技术资本的核心创新能力

首先界定技术资本的概念，然后以“核心能力特征参量罗盘”作为指导，全面展开论述企业核心创新能力相应4方面的投资策略，最后，运用一个案例具体展示基于技术资本核心创新能力的提升经验。     

压水堆堆芯换料设计优化的研究

讨论压水堆堆芯换料设计优化问题，并研制一套实用的换料优化软件包，可用于低泄漏、外－内和改进的外－内装料方案的优化。在低泄漏方案优化时，利用哈林原理将燃料组件布置与可燃毒物配置的优化问题脱耦成两步优化问题。先用线性规划方法进行无可燃毒物时燃料组件布置的优化，然后再用可变容差法寻找可燃毒物的优化布置。应用该软件对秦山核电厂首次难芯换料方案进行了优化，提出了可供参考的一些优化布置方案。