冷轧厂酸洗机组3号横剪大流量中高压液压系统设计方案探讨

在宝钢２０３０ｍｍ冷轧厂酸洗机组中，为了满足厚规格ＩＦ钢的生产，拟将原有的气动式剪切机改成液压式剪切机。为此，设计了一套中高压大流量的液压系统以满足３号横剪大剪切力（最高达７００ｋＮ）和快速剪切（３秒／次）的需要。由于采用了蓄能器增速回路和二通插装阀控制技术，使该液压系统较传统的剪切机液压系统具有响应速度快、体积小、重量轻、发热少和降低电机能耗等优点。     

Reduction of Stibnite at Moderate Temperature

Reduction of stibnite with hydrogen in the presence of calcium oxide has been experimentally inves-tigated at moderate temperature. The results reveal that the effluent generated in the reduction pro-cess contains much less air-polluting substance H_2S, and that the reaction activation energy is63. 3 kJ/mol. The form of antimony changes considerably when the reaction temperature varies.     

The performance of a direct-sequence spread-spectrum acquisition system using a linear prediction filter for narrowband interference suppression

The coarse acquisition performance of a direct sequence spread-spectrum receiver is analyzed when a linear prediction filter is used for narrowband interference suppression. We show that once an appropriate matching strategy is identified, the linear prediction filter can provide favorable performance when narrowband interference is present over a considerable range of both interference power and bandwidth. In addition, the presence of the filter dramatically improves the performance over the case where there is no filter, except when the interference bandwidth and the power are both small (i.e., when the processing gain provides sufficient interference immunity without the filter). If long spreading sequences are used with moderately sized observation windows, the acquisition performance can be severely degraded when a parallel acquisition scheme is used due to the linear predication filter. We show, however, that a slower serial receiver will provide reliable performance.This work was supported in part by the Office of Naval Research under contract ONR N00014-91-J-1234, the Army Research Office under contract ARO DAAL03-91-0071, and the NSF Center for Ultra-High Speed Circuits and Systems (ICAS).     

水闸闸室化算梯形横截面上不平衡剪力的分配计算

当地弹性地基梁法计算非岩石地基的水闸底板应力时，首先要求解出不平衡剪力，当闸墩截面选择梯形时（主要是边墩），常用方法是作图法，这既有误差又繁琐。所以就此推导出一个公式，可直接求解平衡剪力。     

圆杆弹性和弹—塑性扭转公式的探讨

对圆杆在线弹性阶段，弹－塑性阶段和全塑性阶段的扭转剪应力的计算公式作了分析，并推导了在材料的应力－应变关系（τ－γ关系）不服从虎克定律时，扭转真实剪应力的计算公式。文中对扭转强度计算公式的来源，物理含义及其都作了详细的说明。这对执行和理解国家ＧＢ１０１２８－８８《金属室温扭转试验方法》是有益的，而且对高校中材料力学的教学具有一定的参考价值。     

Effect of Compressive Load on Uplift Capacity of Model Piles

Thirty six tests on model tubular steel piles embedded in sand were carried out in the laboratory to assess the effects of compressive load on uplift capacity of piles considering various parameters. The model piles were of 25 mm outside diameter and 2 mm wall thickness. The soil–pile friction angles were 21 and 29° in loose and dense conditions of sand. The piles were embedded in sand for embedment length/diameter ratios of 8,16, and 24 inside a model tank. They were subjected to a static compressive load of 0, 25, 50, 75, and 100% of their ultimate capacity in compression and subjected to pull out loading tests. The experimental results indicated that the presence of the compressive load on the pile decreases the net uplift capacity of a pile and the decrease depends on the magnitude of the compressive load. A logical approach, based on the experimental results, has been suggested to predict the net uplift capacity of a pile considering the presence of compressive load.     

混凝土芯砂石桩复合地基加固堤防软基试验研究

介绍了一种新型的地基处理方法——混凝土芯砂石桩复合地基法及其在水利防洪堤软基加固工程中的应用情况。通过现场原位观测和试验,研究了混凝土芯砂石桩复合地基固结变形、孔压消散、桩土应力分担及承载力特性,结果表明混凝土芯砂石桩强度高,排水固结能力强,能迅速提高桩间土强度和承载力,应用于水利堤防工程既能控制堤防深厚软基的工后沉降,又能提高堤防边坡的稳定性,推广应用前景良好。     

Constructing Pseudo-Random Permutations with a Prescribed Structure

We show how to construct pseudo-random permutations that satisfy a certain cycle restriction, for example that the permutation be cyclic (consisting of one cycle containing all the elements) or an involution (a self-inverse permutation) with no fixed points. The construction can be based on any (unrestricted) pseudo-random permutation. The resulting permutations are defined succinctly and their evaluation at a given point is efficient. Furthermore, they enjoy a fast forward property, i.e. it is possible to iterate them at a very small cost. Received 10 August 2000 and revised 30 September 2000 Online publication 9 April 2001     

Progress in multilayer devices as X-ray optical elements

A new kind of mirror based on multilayering techniques gives the possibility of preparing artificial Bragg reflectors over all the X-UV range. The possibility to choose most of the parameters governing the reflectivity opens the possibility to get a very good efficiency, even under normal incidence. Main parameters, evaporating techniques and tests are described. Some example of recent results are compared to the theoretical predictions.