Synthesis and water absorbency of crosslinked superabsorbent polymers

A series of novel copolymer superabsorbents based on monomer acrylamide (AM), potassium methacrylate (KMA), and 2‐hydroxyethyl methacrylate (HEMA) were prepared by copolymerization using ammonium persulfate (APS) as an initiator and N,N‐methylenebisacrylamide (MBA) as a crosslinking agent. The synthetic variables (the monomer concentration, crosslinker concentration, and initiator concentration) were also studied. The experimental results of superabsorbent polymers (SAPs) show a better absorbency in both water and NaCl solutions. The copolymers were characterized by IR spectroscopy. The water retention in the soil was enhanced using the above superabsorbents. The use of SAPs for the growth of groundnut plants was also investigated. SAPs can be considered for water‐managing materials for agriculture and horticulture purposes in desert and drought‐prone areas. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1795–1801, 2002     

裂解气压缩机级间注水技术的应用

介绍了裂解气压缩机由注洗油改为注水情况，进而得出结论：改注水降温效果明显，压缩机工作效能可得到有效保障。     

Pervaporation study of water and tert‐butanol mixtures

The permeation behavior of water/tert‐butanol mixture through Sulzer Pervap2510 hydrophilic poly(vinyl alcohol) membranes was investigated and the effects of feed composition and temperature on separation efficiency of the membranes were studied. The pervaporation experiments were carried out with feed water content varying from 0 to 20 wt % according to the existing industrial needs and with the feed temperature from 60 to 100°C. Over this range, both water flux and separation factor increased with increasing water content and feed temperature. These phenomena may be attributed to (1) the strong interaction between water and the membrane, (2) the decoupling effect of the permeants and the membrane at elevated temperatures, and (3) the steric hindrance effect of branch chain alcohol. The permeability ratio (the ideal separation factor) of water to tert‐butanol across the membrane was calculated and found to follow the same relationship with increasing temperature and water content. Both flux and separation factor obtained from the Pervap2510 membrane in this study were much higher than previous reported values, possible causes for which were analyzed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 4082–4090, 2004     

Preparation of water‐soluble syndiotacticity‐rich high molecular weight poly(vinyl alcohol) microfibrillar fibers using copolymerization of vinyl pivalate and vinyl acetate and saponification

Water‐soluble high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (s‐PVA) microfibrillar fibers were prepared by the saponification with various conditions such as amount of alkali solution, saponification temperature, and saponification concentration from copoly(vinyl pivalate (VPi)/vinyl acetate (VAc)) copolymerized using various VPi/VAc feed ratios. To produce s‐PVA microbrillar fibers having various water‐soluble temperatures for many industrial applications, the intrinsic viscosities, syndiotactic diad (S‐diad) contents, and degrees of saponification (DS)s of PVAs were finely controlled to 1.2–3.6 dL/g, 56.3–58.3%, and 91.4–98.3%, respectively. Through a series of experiments, it was found that the amount of alkali may alter the structure of the saponified polymers, primarily the DS, and the structural variation changes viscosity. That is, intrinsic viscosity was sharply decreased as the amount of alkali solution was increased. DS was increased with an increase in the amount of alkali solution. S‐diad content was increased with an increase in the VPi content. HMW s‐PVA microfibrillar fibers having S‐diad content of 56.3–58.3% prepared by the saponification of copoly(VPi/VAc) were completely soluble in water at 100°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1482–1487, 2003     

Water uptake and mechanical characteristics of natural filler–polypropylene composites

Water uptake characteristics and some mechanical properties of polypropylene composites containing three types of natural fillers, purified α‐cellulose, wastepaper fibers, and wood flour were studied. The fiber contents were 15, 25, and 35% by weight. Two percent maleic anhydride polypropylene (MAPP) was also added to the mix, as the compatibilizer agent. Mixing process was performed in a Brabender Plasticorder until a constant torque was reached. Composites made out of these combinations were then pressed in a laboratory press and ASTM standard test specimens were cut out of the sheets. Water absorption and tensile tests were performed on these specimens. The results showed a significant difference between the various filler types regarding water uptake. Water uptake also increased by the increase in filler content. Tensile strength and elongation at break in composites declined when compared with pure polypropylene, but their modulus of elasticity increased. Among the three types of fillers, no significant discrepancies were observed in terms of improving mechanical properties in composites. Filler content increase had no drastic effect regarding strength improvement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 941–946, 2003     

用木质素磺酸铵作标准化试剂提高单偶氮、双偶氮酸性染料的冷水溶解度的方法

一般的酸性染料溶解度较小,而本文所介绍的单或双偶氮酸性染料,实际上是以碱金属盐的形式存在,由于加入了（按重量计）80％～30％的木质素磺酸铵,改善了室温的冷水溶解度。木质素磺酸铵既作为标准化试剂,用来调节高强度染料到稳定的商品染料,同时又能提高染料在室温时冷水溶解度。     

水射流清洗技术在石油行业中的应用

简要介绍了水射流清洗机理,对水射流清洗钻杆、油管、油井解堵技术进行了详细的分析,介绍了几种技术的技术特点,操作工具和应用情况。水射流清洗技术具有清洁、节能、方便快捷、成本低等优点,在清洗行业中将发挥重要作用。     

火力发电厂仪用压缩空气带水带油探究

采用系统分析、数学及物理计算的方法,对火电厂仪用压缩空气带水带油的原因进行论证,找出最主要原因,并有针对性地采取了预防和改造措施,对改造效果进行了分析与总结。     

混凝土小型空心砌块专用混合砂浆的配制

针对混凝土小型空心砌块的特点,配制出专用混合砂浆.该砂浆未添加外加剂,便于建筑施工.实验结果表明该混合砂浆和易性能良好.该配合比可以作为基准配合比供其它工程借鉴、使用.     

新型气田水质防垢剂的合成研究

针对四川地区天然气气田水矿化度高、温度高、水型多、结垢严重的特点,将醋酸乙烯酯和马来酸酐进行自由基共聚,研究了试验条件对合成聚合物型防垢剂性能的影响规律,并运用正交试验原理,研究出合成聚合物型防垢剂的最佳试验条件;通过性能评价,该防垢剂对四川地区各种气田水均有很好的防垢作用。