碲镉汞液相外延薄膜的应力研究

用X射线衍射方法对液相外延(LPE)技术生长的碲镉汞(MCT)外延薄膜和CdTe衬底进行了观察与分析。研究表明:MCT薄膜中存在着不同程度的应力,主要表现为晶格的扭曲(300″～1200″范围),这种扭曲致使外延膜双晶回摆曲线宽化,宽化值为100″～150″,外延膜的晶格扭曲与CdTe衬底的不完整性有对应关系。研究还表明:LPE的生长条件对外延膜中的晶格扭曲也有较大影响。本文还讨论了CdTe衬底晶格扭曲形成的因素并探究了减少外延膜晶格扭曲的方法。     

GaAs半导体掺杂浓度的电反射光谱的研究

在波长300～1 100nm范围内,对GaAs进行了电反射光谱的研究。建立了电反射光谱的测试系统,并对实验和理论作了详细分析。推导了某一固定波长电反射光谱与半导体表面掺杂浓度的理论关系。并利用电反射光谱的实验曲线计算了GaAs的表面掺杂浓度,所得结果与电化学C—V的测试结果一致,其精度为5％。     

场致发射显示器技术分析

本文给出了场致发射显示器的基本工作原理,性能优势和应用前景。对目前的发展状况及研究,生产中的主要关键技术进行了分析。     

超晶格材料

本文了与当今研究超晶格材料相关的几个重要问题。     

集成光学干涉仪光纤陀螺

简述了集成光学干涉仪光纤陀螺（ＦＯＧ）的技术优势、发展概况和采用的技术途径，介绍了适用于不同技术条件要求的三种多功能集成光学芯片结构和相应的信息处理方法。简要地概括了目前国外ＦＯＧ的发展水平。     

2,2-Dicyanovinyl-end-capped oligothiophenes as electron acceptor in solution processed bulk-heterojunction organic solar cells

Three 2,2-dicyanovinyl (DCV) end-capped A-π-D-π-A type oligothiophenes (DCV-OTs) containing dithieno[3,2-b:2′,3′-d]silole (DTSi), cyclopenta[1,2-b:3,4-b′]dithiophene (DTCP) or dithieno[3,2-b:2′,3′-d]pyrrole (DTPy) unit as the central donor part, mono-thiophene as the π-conjugation bridge were synthesized. The absorption spectroscopies, cyclic voltammetry of these compounds were characterized. Results showed that all these compounds have intensive absorption band over 500–680 nm with a LUMO energy level around −3.80 eV, which is slightly higher than that of [6,6]phenyl-C₆₁-butyric acid methyl ester (PC₆₁BM, E_LUMO = −4.01 eV), but lower than that of poly(3-hexylthiophene) (P3HT, E_LUMO = −2.91 eV). Solution processed bulk heterojunction “all-thiophene” solar cells using P3HT as electron donor and the above mentioned oligothiophenes as electron acceptor were fabricated and tested. The highest power conversion efficiency (PCE) of 1.31% was achieved for DTSi-cored compound DTSi(THDCV)₂, whereas PTB7:DTSi(THDCV)₂ based device showed slightly higher PCE of 1.56%. Electron mobilities of these three compounds were measured to be around 10⁻⁵ cm² V⁻¹ s⁻¹ by space charge limited current method, which is much lower than that of PC₆₁BM, and was considered as one of the reason for the low photovoltaic performance.     

Oriented total variation l1/2 regularization

Total Variation (TV) is a widely used image restoration/decomposition model. It is observed that the classical TV l1 and TV l2 regularization, on the one hand, do not favor higher-gradient structures over lower-gradient details as expected for structure preserving image processing, and on the other hand, tend to reduce the horizontal and vertical gradients, and thus inevitably blur the oblique edges in images. In this paper, we address these two problems by defining Oriented Total Variation l1/2 (OTV l1/2). It is theoretically and experimentally demonstrated that applying l1/2 regularization to the directional derivatives of images leads to superior structure preservation. OTV l1/2 regularization can be applied to image denoising and video compression, and the experimental results verify that OTV l1/2 outperforms other similar models.     

Structural phase-dependent resistivity of intrinsic-extrinsic co-doped transparent titanium dioxide films

The authors report a method of enhancing the conductivity of TiO₂ films by controlling their structural phases. Thin films of Nb:TiO₂ (TNO) were prepared on glass and silicon substrates by RF sputtering with varying Nb content at 200 °C. It is shown that fine control over the structural phases of TiO₂ is critical for achieving low resistivity. The resistivity values of the films doped with oxygen vacancies and Nb⁺⁵ decreased from 3.8 × 10⁻¹ to 4.1 × 10⁻³ Ω cm when the weight percent of rutile in anatase-rutile phase mixture decreases from 52.8% to 32%. Furthermore, the lowest resistivity value of 2.37 × 10⁻³ Ω cm was obtained for the doped TiO₂ films having single phase anatase structure. The physical processes responsible for the diverse electrical properties are discussed and are associated with the growth conditions. Our result indicates that highly conductive doped-TiO₂ film can be obtained by controlling the anatase phase formation via the growth temperature. The obtained results can significantly contribute to the development of transparent electrodes by RF sputtering, a suitable technique for coating large area substrates.     

建筑施工引起的几个结构设计问题的讨论

介绍了土建施工引起的几个质量问题和应采取的防止措施，对目前出现的一些新的施工方法进行讨论，并对结构设计中存在的个别问题提出了修改意见。     

某分离用固体小火箭工作故障分析及设计改进

为解决某分离用固体小火箭在高温55℃环境试验中,出现壳体失强与较高点火压力峰的问题,分析了发生该工作故障的可能原因。通过对装药结构及挡药板结构进行改进设计,以期扩大燃气通道;通过对点火药盒结构进行改进设计,并调节点火药药量,以期降低点火压力峰值。验证试验表明,改进措施切实有效,点火压力峰值满足设计要求,提高了小火箭工作的可靠性与安全性。