CYLINDRICAL AND CONICAL FOLD GEOMETRIES IN THE CANTARELL STRUCTURE, SOUTHERN GULF OF MEXICO: IMPLICATIONS FOR HYDROCARBON EXPLORATION

The NW‐SE trending Cantarell structure in the Gulf of Campeche hosts the largest oilfield in Mexico. The oil occurs predominantly in latest Cretaceous – earliest Tertiary breccias with subsidiary reserves in Upper Jurassic (Oxfordian and Kimmeridgian) and Lower Cretaceous oolitic and partially dolomitized limestones, dolomites and shaly limestones. Cantarell has been interpreted both as a fold‐and‐thrust zone and as a dextral transpressional structure. Analysis of structure contours at 100m intervals, on the tops of the Tertiary breccia and the Kimmeridgian (Upper Jurassic) dolomite, indicates that the structure is an upright cylindrical fold with gently plunging conical terminations; there is also a conical portion in the central part of the structure. The axes of the central, NW and SE cones are subvertical. This geometry indicates that the two fold terminations and the central cone are aprons rather than points, with the NW and central cone axes intersecting the cylindrical fold axis at the point where the geometry switches from conical to cylindrical. The apical angle (i.e. the angle between the fold and cone axes) varies as follows: (i) in the NW cone, it is ～70° in the breccia and ～76° in the Kimmeridgian dolomite; (ii) in the central cone, it is ～77° in the breccia and ～73° in the Kimmeridgian dolomite; and (iii) in the SE cone, it is ～64° in the breccia and ～57° in the Kimmeridgian dolomite. This indicates that whereas the fold opens with depth in the NW cone, it tightens with depth in the central and SE cones. Assuming a parallel fold geometry, these apical angles indicate an increase in volume in the NW cone (i.e. larger hydrocarbon reservoirs), compared to the central and SE cones. Theoretical considerations indicate that the curvature increases dramatically towards the point of the cone. In the case of the Cantarell structure, the apices of the cones are located at the conical‐cylindrical fold junctions, where the highest curvature may have resulted in a higher degree of fracturing. The coincidence of maximum curvature and the intersection of the conical and cylindrical fold axes in the fold culminations with porous and permeable reservoir rocks may have made these locations favourable for the accumulation of hydrocarbons.     

横泉水库供水发电洞工程地质分析与评价

通过大量野外工程地质勘察与测试工作，在此基础上给出了横泉水库供水发电洞的工程地质分析与评价，从而使该水库的施工有了充分的理论依据。     

论四川盆地天然气勘探前景

中石油及其前身已在四川盆地从事天然气勘探开发工作50余年,截至2005年底累计探明天然气地质储量逾8400×10⁸m³,累计生产天然气超过2300×10⁸m³,年产量现已超过120×10⁸m³,已成为国内目前最大的产气区。对于该盆地进一步勘探前景如何的命题,从以下4个方面给予了论证：一是资源丰富、勘探成果持久不衰，近期仍有大发现；二是要辩证地认识盆地油气地质的复杂性，探索新规律，解放新领域；三是寻求地质认识和勘探技术进步是勘探突破的关键；四是继续以盆地两大地质体系（海相古隆起体系及陆相前陆盆地体系）和8套裂缝-孔隙性储集层（中上寒武统白云岩、石炭系白云岩、上二叠统长兴组生物礁白云岩、下三叠统飞仙关组鲕状白云岩、下三叠统嘉陵江组粒屑白云岩、中三叠统雷口坡组藻粒白云岩、上三叠统须家河组长石岩屑石英砂岩和中上侏罗统红层砂岩）为对象获取更多的天然气资源量及优质储量。据此得出结论：四川盆地天然气勘探前景是广阔的，但勘探难度会逐步加大。     

洪家渡水电站工程高边坡综述

乌江洪家渡水电站坝址河谷深切300余m,硬质岩与软质岩相间分布,岸坡地形陡峻,软弱夹层发育,卸荷、崩塌等物理地质作用强烈。根据坝址地质条件与电站枢纽布置,工程存在:隧洞群进水口同向高边坡整体稳定问题;坝肩开挖、隧洞进出口开挖、厂房开挖及料场开挖等高边坡稳定问题;泄洪冲刷及雾化区1号、2号塌滑体高边坡稳定问题;王家渡堆料场、瓦房寨砂石系统高边坡稳定问题。因此,工程高边坡稳定问题是本工程的主要工程问题之一,但通过参建各方共同努力,本工程高边坡处理都取得了圆满成功。     

Investigation into polishing process of CVD diamond films

A new technique used for polishing chemical vapor deposition (CVD) diamond films has been investigated, by which rough polishing of the CVD diamond films can be achieved efficiently. A CVD diamond film is coated with a thin layer of electrically conductive material in advance, and then electro-discharge machining (EDM) is used to machine the coated surface. As a result, peaks on the surface of the diamond film are removed rapidly. During machining, graphitization of diamond enables the EDM process to continue. The single pulse discharge shows that the material of the coated layer evidently affects removal behavior of the CVD diamond films. Compared with the machining of ordinary metal materials, the process of EDM CVD diamond films possesses a quite different characteristic. The removal mechanism of the CVD diamond films is discussed.     

长距离曲线顶管在杭州河坊街工程中的应用

对杭州市重点工程—杭州河坊街长距离曲线顶管进行了总结和介绍 ,可为同类工程借鉴和参考     

南海东部油田高产稳产开发实践

南海东部海域是中国海洋石油总公司对外合作勘探、开发的主要海域之一 ,自 1990年以来 ,该海域已有 12个油田相继投入开发 ,其中包括 11个砂岩油田和一个礁灰岩油田。在开发初期 ,这些油田多数被评价为边际油田 ,通过中外双方近 10年的共同努力 ,在开展不同阶段精细油田地质和油藏工程研究的基础上 ,结合该海域油田地质及开发特征 ,采用目前世界上先进的开发技术和开采工艺 ,取得了良好的开发效果和经济效益 ,并积累了一套具有海上油田特点的开发经验和作法 ,在油藏工程和油藏管理方面也取得了较大成功。文中通过展示南海东部油田地质及开发特征、开发现状和开发效果 ,剖析了油田开发技术 ,总结了油田开发经验 ,介绍了油田开发形势以及开发潜力     

中关村中心区水文地质及工程地质特征

本文全面、系统地分析了北京市中关村中心区的水文地质及工程地质特征 ,为该地区的工程建设提供可靠的地质资料     

中国工程勘察设计咨询业产业整合的路径选择

产业是由具有相互联系、相互制约的若干组成部分结合在一起并且有特定动能的有机体,产业分工越合理,资金、人力资源和各种自然资源与物质资料在产业内发挥的功能越大;中国工程勘察设计业的产业结构“中间大,两头小”,产业内部资源分布极不合理;结构调整的最佳选择是以工程项目总承包和分包为分工协作的垂直一体化:分化重组中间的工程咨询单位,组建顶端的EPC工程公司,发展低端的专业咨询公司、事务所。     

毛家河水电站库区岩溶发育特征及邻谷渗漏分析

毛家河水电站位于碳酸盐岩地区，库首距左岸邻谷可渡河14—23km、距右岸邻谷北盘江干流14．8km，水库两岸大型落水洞、溶洞及地下岩溶管道相对较为发育。为初步判断水库存在邻谷渗漏的可能性，对水库两岸可溶岩地层岩溶发育形态、特征及规律进行了勘察，并根据现场地质调查资料对3条可疑渗漏带进行了分析论证。