液氮制冷低气压试验箱的仿真设计

在采用液氮制冷的低气压试验箱的设计中,用常规工程设计方法计算的降温过程冷负荷过大,从而导致真空系统设计容量过大。本文采用分布参数模型对试验箱低气压条件下降温过程的冷负荷进行了精确仿真模拟,以此作为真空系统容量设计的基础,减小了设计规模,取得了良好的效果。     

生活中的慢性杀手--石化合成洗剂

文章回顾了石化合成洗剂的发展历史，从经历的五代产品的发展过程中可以看出它经历了一个环保到不环保再到环保的曲折过程分析了石化合成洗剂的主要成分及其清洗去污的作用原理着重指出目前使用的石化合成洗剂虽然给生活带来便利，但同时也给人体健康和生态环境都造成严重的危害；倡导使用新型环保型的第五代洗剂已成为新世纪中清洗剂发展的必然趋势。     

正确理解和使用反倾销法律手段

从世界贸易组织关于反倾销的有关定义入手,结合我国现行国际贸易事务中化工行业对外反倾销调查和裁定案例,剖析了部分反倾销措施对化工产业总体发展的消极影响,提出了“综合论证”的操作方法,以降低因少数化工产品反倾销调查和裁定给国内其他产业的发展和最终消费者带来的损失。     

A study of the large strain deformation and failure behaviour of mixed biopolymer gels via in situ ESEM

A mixed biopolymer gel, consisting of a protein (gelatin) and polysaccharide (maltodextrin) mixture has been investigated. By controlling the composition it was possible to construct an ‘emulsion-like’ structure, with included spherical particles of one phase (maltodextrin) within a continuous matrix of the second (gelatin). Large strain deformation and failure behaviour of this system has been examined via in situ environmental scanning electron microscopy (ESEM). ESEM has been employed to explore the changes in the structure of the material, whilst allowing the sample to stay hydrated as it was subjected to tensile strain, thereby allowing simultaneous imaging and determination of stress-strain data of the native sample. Ductile behaviour was observed, which has been attributed to the stretching, tearing and fracture of gelatin ligaments and debonding at the interface between the maltodextrin particles and continuous gelatin matrix. Deformation and fracture of the maltodextrin particles during tensile testing was also observed. The interfacial fracture energy of the composite has been calculated following an elastomer composite-debonding model, although there are several limitations to this approach for the mixed gel. It was found in samples tested after different ageing times that the debonding stress and strain was decreasing with ageing leading to a lower interfacial fracture energy. Samples were also tested after successive loading cycles, which resulted in a mechanical strength decrease after each cycle.     

聚合反应器制造质量控制要点探讨

聚合反应器是无法检修设备,不允许打开,所以聚合反应器的制造质量必须严格控制,在设备制造过程中,严格按照设计图纸、技术要求及国家现行标准,进行控制设备制造、检验和验收,使制造质量达到规定要求。     

对选矿废水综合利用的探讨

通过对金堆城钼业公司选矿废水再用于选矿作业的选矿试验，证明选矿废水循环利用是可行的，既提高了选矿浓度，又减少了对环境的污染，经济和社会效益显著。     

玻璃钢管道的特点,设计原理及选用时的注意事项

本文旨在通过对玻璃钢管道及其标准的发展历史、产品特点、基本设计原理、质量影响因素及选用时应注意的事项等方面的介绍，使用户与工程设计人员对该产品有一个比较全面的了解，以便更好地选用并受益于这种管材。