注脂螺栓在桥梁工程中的应用

注脂螺栓连接是钢结构无滑移连接的一种新方式,通过在螺杆与孔壁缝隙间填充环氧树脂的方式,达到无滑移的目的。它可以选择是否预加力。注脂螺栓在旧桥加固维修中有特殊的优势。介绍了注脂螺栓的构造、优缺点、徐变、安装以及欧洲规范对其设计的规定。     

不锈钢螺栓连接节点的破坏研究

尽管不锈钢与碳素钢的机械性能有显著的不同,但是现有规范关于不锈钢连接节点的设计规定都基于碳素钢的设计准则。对于不锈钢螺栓连接节点的设计抗力,EN1993-1-4和SCI/EuroInox(美国《科学引文索引》/欧洲不锈钢协会)的不锈钢设计手册基于EN1993-1-8和EN1993-1-3作了一些小修改。研究了厚板和薄板的不锈钢螺栓连接节点的承载性能。提出了一个奥氏体不锈钢和铁素体不锈钢试件的数值分析模型,并证明其正确性。将该模型用于螺栓节点承载力的参数分析,可研究主要变量对其影响。这些参数包括螺栓边距e2,端距e1和板厚t。结果表明,不锈钢螺栓节点的变形性能与碳钢节点存在某种程度的不同。数值模型中最初出现裂纹的部位与试验中观察到的不锈钢节点和碳素钢节点相符,这种相符性被作为定义一种强度失效准则的基础。以参数分析结果为基础的不锈钢螺栓连接节点承载能力极限状态和正常使用极限状态设计法则比现行的EC3法则更加经济和简捷。     

Rechnerische Beurteilung der Schubtragfähigkeit einer Spannbetonbrücke mit geringem Querkraft bewehrungsgrad

Assessment of the shear strength of an existing post‐tensioned concrete bridge with a low amount of shear reinforcement – First application of the ”Flexural Shear Crack“ model in practice In recent years it was reported several times, that within a static assessment according to current standards the shear strength of post‐tensioned bridges, which were built in Austria before 1989, cannot be fulfilled any more. However, test results prove, that especially prestressed structures have additional load bearing capacities, which cannot be reproduced with current calculation models. In the framework of a pilot project a new developed shear model (Flexural Shear Crack Model) was used. In this paper the approach as well as the main results of a statical reevaluation of an existing post‐tensioned road bridge at the Tauern Autobahn A10 will be presented.     

Zentrische Druckversuche an schlanken UHPC‐Stützen

Axial compression tests on slender columns – unreinforced slender columns: a taboo? – Debate on potential and risk Within the project of the Priority Programme (SPP) 1542 ”Concrete light“, which is funded by the German Research Foundation (DFG), unreinforced UHPC columns with square and rectangular cross‐section were tested under axial compression in the subproject ”Cross sectional adaption for rod‐shaped elements in compression“. The results were compared with test series of other researchers. The focus of the study was on the buckling behavior of columns with different conditions of end support. A hinged and a fixed support have been applied for these experiments. In addition to an analysis of the failure process, the results were compared with the Euler buckling load and the normal stress in consideration of second‐order effects. Concluding, advantages and disadvantages of both approaches are presented, compared, and discussed.     

Begrenzung der Rissbreite nach Eurocode 2

Crack width control according to Eurocode 2 – Explanatory notes on factor k _c Reinforced concrete members are designed now according to EC2 [1]. A significant aspect is the determining of the minimum reinforcement area specified in section 7.3.2. Due to the shortened illustrations of the equations (7.1) and (7.2), the mechanical background is difficult to be highlighted. This often results in inaccurate use of the model parameters, which might lead to an unsafe design, particularly for members predominantly reinforced only by the minimum reinforcement. Therefore the mechanical background of the equations (7.1) and (7.2) is focused on in this contribution. Proper discussions and explanations might help the structural engineer in the practical design.