聚苯乙烯泡沫塑料板在三清干渠改建工程中的试验

高台县友联灌区三清干渠地处严寒地区，且渠道沿线地质条件较差，影响渠道衬砌改建质量的关键技术问题是防冻胀设计。由于三清干渠附近缺乏垫层料，采用垫层置换防冻胀投资高，且垫层质量难以控制。设计人员根据有关规范要求．结合渠线地质条件．采用聚苯乙烯泡沫塑料保温板进行防冻胀试验，较好地解决了冻胀问题。     

Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

孔型热轧时轧制力的实用计算公式

采用修正系数法,利用板材在带刻槽的冲头进行深冲与平面冲头下深冲时的接触压力的比值确定孔型影响系数,进而推导出孔型热轧时轧制力的实用计算公式.     

新型聚氨酯固-固相变储能材料的组成与热性能的关系

利用差示扫描量热仪、傅里叶红外光谱仪、广角X射线衍射仪研究了一种新型的以聚乙二醇为软段的聚氨酯相变储能材料。结果表明，当软段含量低于90％（质量分数，下同）时，即使温度高于聚乙二醇的熔点，此类材料仍不会熔化成液体，而表现出一种固-固相变行为。该聚氨酯储能材料相变焓较大，相变温度适中，且随着软段含量的减少，材料相变焓和相变温度呈递减趋势。其相变过程实质是聚氨酯软段聚乙二醇由结晶固态转变为无定形固态的过程。     

酮亚胺对水性聚氨酯性能的改进

用丙酮分别和乙二胺、己二胺反应制备酮亚胺,并以其作为潜伏性扩链剂改善水性聚氨酯(PU)的性能。研究了酮亚胺以不同方式、加量对水性PU漆膜的厚度、硬度、耐水性、耐酸性、热稳定性和机械性能的影响。结果表明,采用丙酮缩乙二胺扩链的水性PU乳液的漆膜的耐水性优于用丙酮缩己二胺和用水扩链的PU乳液的漆膜,且加入过量的酮亚胺扩链效果较好,但其热稳定性并没有得到明显提高。     

Effect of Calcium Lactate, 4-Hexyl Resorcinol and Vacuum Packing on Physico-chemical, Sensory and Microbiological Qualities of Minimally Processed Litchi (Litchi chinensis Sonn.)

Litchi (Litchi chinensis Sonn.) fruits are very susceptible to pericarp browning which adversely affects consumer acceptability even though the aril portion remains in excellent condition. Litchi arils (litchis) were treated with a solution containing 0–2% (w/v) calcium lactate (CL), 0–0.02% (w/v) 4‐hexyl resorcinol (4‐HR) and 1% potassium sorbate. The pH of solution was adjusted to 4.0 with citric acid. Treated litchis were packed in polystyrene trays, over‐wrapped with polypropylene film, vacuum‐packed (0, 47409.3, 94831.9 Pa) and stored at 4 ± 2 °C. Drip losses, pH, total soluble solids (TSS), sensory attributes and microbiological quality of stored samples were estimated. A four‐factor, three‐level experimental design (D₆ Hokes design) with 19 experiments was chosen. Mathematical models were developed to analyse and predict the effect of CL, 4‐HR, in‐package vacuum and storage time on the responses. TSS, pH and sensory scores decreased significantly (P 0.01), whereas drip losses and microbial count increased significantly (P 0.01) with time. Drip loss was significantly (P 0.1) reduced by addition of CL. 4‐HR prevented browning and changes in colour score during storage were significantly less. Vacuum in packages exerted significant (P 0.01) effect over pH, TSS, sensory and microbiological qualities of minimally processed litchis.     

Prediction of foam growth and its nucleation in free and limited expansion

The influence volume approach (IVA) is often utilized for modeling the mass transfer process dictating bubble growth dynamics in physical foaming. However, the assumed concentration profile in the IVA method is only valid when the changes in dissolved gas concentration are small (less than 5%). In addition, the validity of the IVA method is difficult to justify in chemical foaming applications because of the difficulties involved in defining the dissolved gas concentration profile.In the present work, we define two distinct stages of bubble growth for physical foaming. These two stages are termed as free and limited expansion and are controlled by the bubble nucleation rate. Bubble nucleation is assumed to occur only in the free expansion stage. In this stage, the bubble pressure drops substantially from an initially high pressure in the supersaturated state while the dissolved gas concentration changes very little. The second stage of our two-stage mass transfer model is termed the limited expansion stage and accounts for bubble growth in the late stages of foam evolution, when the pressure changes become small. However, in the limited stage of bubble growth the dissolved gas concentration drops significantly, as the available dissolved gas is depleted. To summarize our two-stage mass transfer model of foam expansion, the pressure difference between the bubble phase and the liquid phase is the primary mechanism for driving mass transfer in the early (free) stages of foam growth and the concentration difference is the driver for bubble growth in the late (limited) stages of growth. The first stage can be regarded as the nucleation stage and it is relatively short; while the second stage can be regarded as the bubble growth stage and is much longer. Most of the bubble volume expansion takes place in the second stage.The concentration gradient at the bubble edge, which is often ignored in other models, is analyzed in detail in this paper. The details of our novel mass transfer model are also presented.     

New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

底部框剪砌体房屋空间弹塑性地震反应分析

本文提出了底部框剪砌体房屋这类上下混合承重结构体系的空间弹塑性地震反应时程分析方法。针对砌体结构和框架抗震墙结构截然不同的抗震性能，对上部砌体结构采用空间剪扭分析法，而对下部框架抗震墙结构采用空间协同分析法，建立了组合型串联刚片系振动模型。对单向和双向地震波输入结构层位移反应进行了比较。     

吐哈油田葡北3-12井超长封固段固井技术

葡北3-12注气井位于吐哈盆地葡北构造带中断葡北1号构造．井深为3610m。针对该区块地层承压能力低，易漏失，油气水窜严重，常规固井方法无法满足固井要求的问题，该井采用三段三凝制、常规水泥浆和泡沫水泥浆体系固井，并采用重钻井液顶替技术．降低施工压力。该技术能保证固井候凝过程中井底压力平衡，施工安全。现场应用表明，采用常规水泥浆和泡沫水泥浆固井技术．提高了低压易漏井、长封固井段的固井质量，解决了水泥返高不足的问题；并通过一次常规固井工艺实现了全井封固，简化了施工工艺，节约了成本，经济效益和社会效益十分显著。该井封固优质段累计达2600m，优质率达85％，固井结果良好。