Hydrothermal Reaction Mechanism and Pathway for the Formation of K2Ti6O13 Nanowires

Calculations and detailed first principle and thermodynamic analyses have been performed to understand the formation mechanism of K₂Ti₆O₁₃ nanowires (NWs) by a hydrothermal reaction between bulk Na₂Ti₃O₇ crystals and a KOH solution. It is found that direct ion exchange between K⁺ and Na⁺ plus H⁺ interactions with [TiO₆] octahedra in Na₂Ti₃O₇ promote the formation of an intermediate H₂K₂Ti₆O₁₄ phase. The large lattice mismatch between this intermediate phase and the bulk Na₂Ti₃O₇ structure, and the large energy reduction associated with the formation of this intermediate phase, drive the splitting of the bulk crystal into H₂K₂Ti₆O₁₄ NWs. However, these NWs are not stable because of large [TiO₆] octahedra distortion and are subject to a dehydration process, which results in uniform K₂Ti₆O₁₃ NWs with narrowly distributed diameters of around 10 nm.     

An Agent Interaction Based Method for Nonlinear Process Plan Scheduling

This article puts forward a scheduling method for nonlinear process plan shop floor.Task allocation and load bal- ance are realized by bidding mechanism.Though the agent interaction process,the execution of tasks is determined and the coherence of manufacturing decision is verified.The employment of heuristic index can help to optimize the system performance.     

S135钻杆钢在钻井液中的氧腐蚀行为

基于系统的理论分析和现场腐蚀产物的XRD分析,揭示了S135钻杆钢在3%NaCl溶液中的氧腐蚀机理。为研究腐蚀因素与腐蚀速率的关系,通过室内高压釜动态模拟实验,分别研究了钻井液中含氧量、钻井液温度、钻井液流速和钻井液盐浓度对S135钻杆钢的氧腐蚀速率影响规律。实验研究结果表明(1)3%NaCl盐水钻井液对S135钻杆钢的腐蚀主要是氧去极化作用所致;(2)钻井液含氧量和钻井液流速的增加会加快钻杆钢的氧腐蚀速率,而钻井液温度和含盐量对钻杆钢的氧腐蚀速率具有双重作用。     

水系统的积垢及其物理控制技术

主要综述了水系统中水垢的种类、形成机理及其物理防治方法。详细阐述了静电、电子以及磁化等物理控垢法的工作原理及技术要点,并指出了其发展方向。     

重整机理模型在生产计划中的应用研究

炼油厂在安排全厂生产计划时，一般依据装置的经验数据来安排生产。本文用重整模拟软件为生产计划提供Delta-Base数据，探讨重整机理模型在生产计划安排生产中的应用。研究结果表明，重整机理模型能够为生产计划提供合理而可靠的Delta-Base数据。     

裂缝性油气藏采收率：100个裂缝性油气田实例的经验总结

通过对世界上100个裂缝性油气藏的综合评价，研究储集层及流体本身的性质(包括孔隙度、渗透率、黏度、可动油比例、含水饱和度、润湿性及裂缝分布特征等)和驱动机制及油藏管理战略(优化日产量和采用不同类型的提高采收率技术)对其最终采收率的影响。将裂缝性油气藏分为4类：I类的基质几乎没有孔隙度和渗透率，裂缝是储存空间和流体流动的通道；Ⅱ类的基质有较低的孔隙度和渗透率，基质提供储存空间，裂缝提供流动通道；Ⅲ类(微孔隙)的基质具有高孔隙度和低渗透率，基质提供储存空间，裂缝提供流动通道；Ⅳ类(大孔隙)的基质具有高的孔隙度和渗透率，基质提供储存空间和流动通道，裂缝仅增加渗透率。对26个Ⅱ类油气藏和20个Ⅲ类油气藏的开采历史的研究表明：Ⅱ类油气藏的采收率受水驱强度和最优日产量控制，日产量过高会很容易破坏Ⅱ类油气藏，一些Ⅱ类油气藏如果管理得当，采收率可以很高，不需要二次或三次采油；Ⅲ类油气藏的采收率主要受岩石和流体本身性质的影响，特别是基质渗透率、流体重度、润湿性以及裂缝强度等，不进行二次或三次采油不可能完全开采，往往需要采用一些提高采收率的专门技术。以往将Ⅱ类和Ⅲ类裂缝性油气藏归为一类，认识它们的区别将有助于选择更好的开发策略。     

会计政策选择的效率性分析

会计政策选择类型在理论上大体可分为机会主义型和效率(或有效契约)型。会计政策选择具有效率性,但也为经理人员的机会主义行为打开了大门。在我国,由于企业缺乏一系列有效的激励约束机制,会计政策选择的机会主义仍然严重。为此,必须建立适合我国企业有效的激励约束机制。     

Different insights for improving part and system reliability obtained from exactly same DFOM “failure numbers”

Techniques for improving the reliability and maintainability of both nonrepairable and repairable items can be suggested by failure data analysis. It is shown that a given set of failure numbers leads to very different improvement strategies when the numbers are the times-between-successive-failures of one or more repairable items, rather than the times-to-failure of nonrepairable items. Since this should have been obvious more than 50 years ago, at the onset of formal reliability engineering activities, several reasons are proffered for the widespread and protracted misinterpretation of even the most basic—and simple!—conceptual and practical differences between nonrepairable and repairable items.     

高分辨裂解气相色谱－质谱研究聚吡咙的热分解

用高分辨裂解气相色谱－质谱考察了不同聚吡咙的热分解，分析了其热分解产物的组成、分布和归属，研究了其环化过程以及该过程对热分解的影响，进而详细阐述了聚吡咙的热分解机理。     

基于DOS的多窗口系统的设计与实现

窗口系统是人机交互的基本环境，与目前ＤＯＳ上的窗口系统相比，本文力求突出高效，低开销，具有多任务模拟能力，满足可移植性，实用性和开放性目标，本文首先提出一个基于ＤＯＳ的多窗口系统ＷＩＮＤ的总体设计，采用面向对象技术，讨论了其多窗口管理机制的特征和方法，并设计和实现了该系统相关的基本工具，最后通过编程环境、界面风格和应用实例等进一步介绍该窗口系统的应用接口。