企业施工定额的编制以及施工成本分析平台的应用

本文阐述了施工企业内部编制定额的必要性和成本分析平台的实用性,并根据多年的工作经验就建筑施工企业对施工成本的控制谈谈一自己的认识和看法.     

A study of the effects of the location of flashing inception on maximum and minimum critical two-phase flow rates:: Part II: analysis and modelling

A general unified model is developed to predict one-component critical two-phase pipe flow. An extension of the Henry [Henry, R.E., 1970. The Two-Phase Critical Discharge of Initially Saturated or Subcooled Liquid. Nucl. Sci. Eng. 41, 336-342.] and Henry and Fauske [Henry, R.E., Fauske, H.K., 1970. The two-Phase critical Flow of One-Component Mixtures in Nozzles; Orifices and Short Tubes, ASME J. Heat Transfer, May 1970.] models to incorporate the effects of wall friction and the location of flashing inception is proposed. Modelling of the two-phase flow is accomplished by describing the evolution of the flow between the location of flashing inception and the exit (critical) plane. The model approximates the nonequilibrium phase change process via thermodynamic equilibrium paths. Included are the relative effects of varying the location of flashing inception, pipe geometry, fluid properties and length to diameter ratio. The model predicts that a range of critical mass fluxes exist and is bound by a maximum and minimum value for a given thermodynamic state. This range is more pronounced at lower subcooled stagnation states and can be attributed to the variation in the location of flashing inception. The model is based on the experimental study of critical two-phase flow rates of saturated and subcooled water through long tubes given in Part I of this work. In that study, the location of flashing inception was accurately controlled and adjusted through the use of a new device. The data obtained revealed that for fixed stagnation conditions, the maximum critical mass fluxes occurred with flashing inception located near the pipe exit; while minimum critical mass fluxes occurred with the flashing front located further upstream. The results of the present study, as well as available data since 1970 are compared with the model predictions. These data cover a wide range of conditions and include test section L/D ratios from 25 to 302 and a temperature and pressure range of 110-280°C and 0.16-6.9 Mpa, respectively. The predicted maximum and minimum critical mass fluxes show an excellent agreement with the range observed in the experimental data.     

碘量法测铜中物质性质和分析操作

本文讨论了碘量法测定铜量中一些有关物质的特性,以及这些性质对分析条件和操作的要求。     

THE USE OF TRANSMISSION AND TRANSFLECTANCE NEAR INFRARED SPECTROSCOPY FOR THE ANALYSIS OF BEER

Both transmission and transflectance near infrared spectroscopy have been evaluated for the rapid analysis of beer components. Results of sufficient accuracy have been obtained for ethanol content and Original Gravity. Application of a first derivative mathematical treatment on the spectral data improved calibration equations. Better accuracy was achieved using the transmission mode compared to that using the transflectance mode.     

Empirical Evaluations of Usage-Based Reading and Fault Content Estimation for Software Inspections

This thesis describes six empirical investigations of two techniques applied to software inspections, namely reading techniques and fault content estimation techniques. The first part of the thesis presents a series of experiments of a novel reading technique called usage-based reading. The second part investigates fault content estimation applied to the software inspection process. The estimation methods used are capture-recapture and curve fitting.     

炼油企业泵振动故障诊断

通过现场振动故障诊断案例的分析,找出了炼油企业中泵振动故障的原因主要是泵转子不平衡、小流量、泵转子与壳体不同心、泵轴承故障等。并在停机检修后发现故障产生的原因与诊断的相符,大大降低了故障诊断的难度,快捷、准确地解决问题,为企业效益最大化奠定了基础。     

On the relationship between parity space and approaches to fault detection

Parity space approach and H₂ approach are two important fault detection approaches. This paper studies the relationship between these two approaches, which reveals frequency domain characteristics of the optimal solution of the parity space approach on the one side and provides a numerical solution of the H₂-optimal design of residual generators on the other side.     

万用表电压测量法查找直流接地故障

直流电源是发电站的主要设备，一旦直流系统发生接地故障，将会严重地危及到发电站的安全和经济运行。因此，本文介绍一种简单易行，能快速找出直流接地点的方法一万用表电压测量法。     

NaSCN装置脫色釜H_2S爆燃的原因分析与对策

分析了NaSCN装置脱色釜爆燃的原因,找出了引起爆燃的主要因素,提出了脱色生产安全防范措施。