Elastoplastic modelling of subsurface crack growth in rail/wheel contact problems

Propagation of small subsurface cracks subjected to shear under repeated rolling contact load is studied. An analytical crack model (Dugdale) with plastic strips at the two crack tips is employed. Compressive stresses promoting crack closure and friction between crack faces are considered. The triaxial stress state is used in the yield criterion. A damage criterion is suggested based on experimental LCF data. In a numerical study, critical crack lengths are found below which propagation of an existing crack should be effectively suppressed.     

行政权力腐败的模型分析及治理对策

腐败是与政府行政权力相伴生的痼疾，既是一个历史现象又是一个国际现象。贪污腐败和寻租腐败是委托一代理模型中最典型的腐败方式，文章在此基础上对贪污腐败和寻租腐败进行成本一收益分析和市场均衡分析，并探讨治理行政权力腐败的有效途径。     

Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched components

The paper presents an expression useful to estimate the notch stress intensity factor (NSIF) from finite element analyses carried out by using a mesh pattern with a constant element size. The evaluation of the NSIF from a numerical analysis of the local stress field usually requires very refined meshes and then large computational effort. The usefulness of the presented expression is that (i) only the elastic peak stress numerically evaluated at the V‐notch tip is needed and no longer the whole stress–distance set of data; (ii) the adopted meshes are rather coarse if compared to those necessary for the evaluation of the whole local stress field. The proposed expression needs the evaluation of a virtual V‐notch tip radius, i.e. the radius which would produce the same elastic peak stress than that calculated by FEM at the sharp V‐notch tip by means of a given mesh pattern. Once such a radius has been theoretically determined for a given geometry, the expression can be applied in a wide range of notch depths and opening angles.     

Grand theories of personality cannot be integrated.

Comments on the original article "A New Big Five: Fundamental Principles for an Integrative Science of Personality," by Dan P. McAdams and Jennifer L. Pals (see record 2006-03947-002). McAdams and Pals (April 2006) presented a new model to integrate the field of personality psychology. Cultural and evolutionary factors interact with an individual's basic traits, characteristic adaptations, and life narratives, which in turn are linked to roles, demands, and behaviors. The current authors welcome McAdams and Pals's (2006) model for providing a way to integrate much of the previously disparate empirical findings in personality psychology. However, the current authors also think that McAdams and Pals (2006) overstated the inclusiveness of the model, and more generally, the current authors dispute their assertion that the grand theories of personality can be integrated within a single model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Applications of the discrete element method in mechanical engineering

Compared to other fields of engineering, in mechanical engineering, the Discrete Element Method (DEM) is not yet a well known method. Nevertheless, there is a variety of simulation problems where the method has obvious advantages due to its meshless nature. For problems where several free bodies can collide and break after having been largely deformed, the DEM is the method of choice. Neighborhood search and collision detection between bodies as well as the separation of large solids into smaller particles are naturally incorporated in the method. The main DEM algorithm consists of a relatively simple loop that basically contains the three substeps contact detection, force computation and integration. However, there exists a large variety of different algorithms to choose the substeps to compose the optimal method for a given problem. In this contribution, we describe the dynamics of particle systems together with appropriate numerical integration schemes and give an overview over different types of particle interactions that can be composed to adapt the method to fit to a given simulation problem. Surface triangulations are used to model complicated, non-convex bodies in contact with particle systems. The capabilities of the method are finally demonstrated by means of application examples. Commemorative Contribution.     

A longitudinal examination of the social-cognitive model applied to high school girls' choices of nontraditional college majors and aspirations.

This study tested a partial version of R. W. Lent, S. D. Brown, and G. Hackett's (1994) social-cognitive career theory model. Among 204 high school girls who attended science, math, and engineering (SME) career conferences, the authors used a 4-year longitudinal design to predict the choice of an SME college major and SME self-efficacy and outcome expectations in college. In addition, among students who had declared SME majors, variables assessed in high school and college were used to predict aspirations to become leaders in SME fields. The results generally provided empirical validation of the model. Regression analyses revealed that college SME outcome expectations were associated with plans to become a leader in an SME field. Implications for research and interventions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

油气集输系统新增产能建设拓扑优化方法研究

在油气集输新增产能建设中,为充分利用已建管网系统的处理能力,达到降低投资,提高经济效益的目的,进行了油气集输新增产能建设布局优化方法的研究。针对新建集输管网为树状结构的情况,建立了油气集输系统新增产能建设拓扑优化的数学模型,讨论了计算复杂性问题。根据模型的特点,将问题分解为拓扑级优化和几何级优化两个子问题,并通过它们之间的迭代进行求解。实例计算表明,所建立的数学模型正确,求解方法可行,能用于工程实际设计。     

反拍卖采购:一种新的采购模式

反拍卖采购技术以其新的理念和对信息技术的融合，能够使企业采购成本大幅度降低。通过对我国传统采购模式与反拍卖采购模式的对比分析，可以了解到反拍卖采购技术的应用前景。     

多级网络多处理机系统的性能评估

本文建立了多级网络(δ-网)多处理机系统的马尔柯夫模型,为系统结构参数和任务粒度的选择提供了依据。文中分析了处理机数目、网络结构参数和任务粒度对系统性能的影响,并对模型计算结果和仿真结果作了比较。     

Object data MODEL = object-oriented + semantic models

The term ‘object-oriented database’ has been used to refer to different characteristics and mechanisms supported by semantic databases and (behaviorally) object-oriented ones. While this indicates the current confusion due to the lack of a common model, it also suggests the potential desirability of combining these two kinds of modeling facilities into the same nutshell. This paper summarizes from these two paradigms the features common to both, the features influenced/adopted by each other, and the features which are presented in one paradigm but missing from the other. After a brief analysis and discussion of these features, we conclude this paper by proposing our major theme: a complete object data model should take the union of the facilities offered by these two kinds of models.