基于兴趣和信任评价的P2P语义社区模型

针对大规模网络中P2P信息共享面临的资源定位问题和“搭便车”现象,在考虑节点语义相似度、信任度和活跃强度的基础上,提出一种语义社区构建方法,提高P2P资源组织的结构性和定位准确性。建立基于信任评价的语义社区动态调整机制,以减少或消除“搭便车”的节点。     

金属表面环氧漆漆膜拉伸剪切强度的测定

借鉴国标胶粘剂拉伸剪切强度测定方法测定了阳极、阴极环氧电泳漆与环氧涂料在底材为铝合金及钢材上漆膜的拉伸剪切强度，在铝件及钢铁件表面上阳极电泳漆漆膜的拉伸剪切强度为11．60MPa及17．91MPa，阴极电泳漆漆膜分别为17．60MPa及23．20MPa，喷涂环氧漆膜为7．93MPa 及13．40MPa，并介绍了测定试验中的实际操作经验和技术细节。     

低密度、高强度DG型高变催化剂的研制

本文叙述了一种适合大型氨厂使用的、堆密度低到1.25 kg·L^-1、还原态侧压强度高达350 N·cm^-1以上、本体含硫＜500 ppm(wt)、低温活性好的高温变换催化剂的研制开发过程 还介绍了催化剂制备工艺特点和工业试用效果。     

Effect of display location on control-display stereotype strength for translational and rotational controls with linear displays

Experiments were designed to investigate the effects of control type and display location, relative to the operator, on the strength of control/display stereotypes. The Worringham and Beringer Visual Field principle and an extension of this principle for rotary controls (Hoffmann E.R., and Chan A.H.S. 2013). “The Worringham and Beringer ‘Visual Field’ Principle for Rotary Controls. Ergonomics.” 56 (10): 1620–1624) indicated that, for a number of different control types (rotary and lever) on different planes, there should be no significant effect of the display location relative to the seated operator. Past data were surveyed and stereotype strengths listed. Experiments filled gaps where data are not available. Six different control types and seven display locations were used, as in the Frame of Reference Transformation Tool (FORT) model of Wickens et al. (Wickens, C.D., Keller, J.W., and Small, R.L. (2010). “Left. No, Right! Development of the Frame of Reference Transformation Tool (FORT).” Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting September 2010, 54: 1022–1026). Control/display arrangements with high stereotype strengths were evaluated yielding data for designers of complex control/display arrangements where the control and display are in different planes and for where the operator is moving. It was found possible to predict display/control arrangements with high stereotype strength, based on past data.

Practitioner Summary: Controls and displays in complex arrangements need to have high compatibility. These experiments provide arrangements for six different controls (rotary and translational) and seven different display locations relative to the operator.     

Residual strength prediction of multiple cracked stiffened panels

Prediction of the coalescence of adjacent cracks is critical for residual strength estimation of structures under multiple site damage conditions. A methodology successfully developed for the case of crack link‐up prediction of un‐stiffened plates, is extended for the case of typical cracked stiffened aircraft panels. The proposed link‐up criterion is based on the change in the magnitudes of elastic and plastic strain energies of the stiffened panel, before and after the cracks coalesce. The strain energy magnitudes of interest are calculated using non‐linear elastic–plastic finite‐element analysis. For the application and verification of the method, experimental results from the open literature are used. Residual strength values calculated by the proposed methodology are in good agreement with the experimental results. The present criterion provides superior results when compared to the existing and commonly applied link‐up criteria.     

亚麻针织产品的酶整理工艺探讨

为改善亚麻针织物的舒适性能，探讨用生物酶整理工艺来提高其柔软性。选取酶剂浓度、pH值、温度和时间4个因素作为正交实验的因子，进行了四因素四水平的正交实验。通过对实验结果的分析，确定了合理的生物酶整理工艺条件。工艺参数分别为：酶整理温度为50℃，整理液pH值为5，酶剂浓度为2%，整理时间为60min,亚麻针织坯布经过这种优化的酶整理后柔软性改善效果十分显著。     

无碳化物贝氏体在曲轴上的应用与展望

介绍了无碳化物贝氏体钢的特点、合金化原理、获得方法和在曲轴上的应用前景。     

Development of grain boundary allotriomorphic ferrite/granular bainite duplex steel

A new hot-rolled low alloy high strength steel with grain boundary allotriomorphic ferrite/granular bainite duplex micro-structure has been developed through novel microstructure and alloying designs without any noble metal elements such as nickel and molybdenum. Its as-rolled microstructure and mechanical properties, fatigue crack propagation behavior compared with single granular bainitic steel as well as continuous cooling transformation, were investigated in detail. The measured result of CCT (continuous cooling transformation) curve shows that such duplex microstructure can be easily obtained within a wide air-cooling rate range. More importantly, this duplex microstructure has much better combination of toughness and strength than the single granular bainite microstructure. It is found that the grain boundary allotriomorphic ferrite in this duplex microstructure can blunt the rni-crocrack tip, cause fatigue crack propagation route branching and curving, and thus it increases the resistance to fati