Erosion-corrosion of a stainless steel distillation column in food industry

Unusual extended corrosion phenomena were detected in a distillation column made in AISI type 316 stainless steel (UNS S31600) of a plant for natural pectins extraction from citrus. The column was the first of a series of two distillation columns representing the unit core. Corrosion problems were observed only in that column and mainly along the surface of the trays located in the lower section of the column. The phenomenon was observed subsequently to a modification of the original plant layout that caused an increase of the operating temperatures and turbulence of the process stream inside the column.     

应用列对象的Tag属性实现多表数据动态查询

探讨在PB开发的应用程序中利用数据窗口列对象的Tag属性,结合自行设计的一个更改SELECT语句中的Where子句的全局函数,实现应用程序多表数据的动态查询。该种方法是PB开发的应用程序中实现数据查询的一种高效、简洁且行之有效的方法。     

堆石混凝土单轴受压应力-应变全曲线试验方法研究

为了研究堆石混凝土应力-应变全曲线,采用碟形弹簧与钢柱组合成附加刚性元件增强压力机的刚性,研究了碟形弹簧并联与串联联结装置的变形量和刚度以及实现单轴受压端部减摩措施,提出了一种堆石混凝土单轴受压应力-应变全曲线的试验方法。在混凝土压力试验机上进行了堆石混凝土立方体试件单轴受压试验,测得了堆石混凝土受压应力-应变全曲线。试件破坏形态表明,采用的端部减摩措施有效,测得的应力-应变曲线下降段验证了碟形弹簧与钢柱组合装置能够吸收试件破坏时混凝土压力试验机存储的变形能。研究结果为在混凝土压力试验机上进行堆石混凝土单轴受压应力-应变全曲线提供了可行、简便、经济的测试方法。     

多目标优化策略在精馏过程中的应用研究

针对精馏塔自由度多,能耗大,扰动复杂多变,控制和优化要求高等特点,提出了一种基于动态矩阵控制(DMC)的二层多目标优化控制策略。在实现精馏过程控制目标的前提下,设计了二层优化指标,可在有多余自由度的情况下,进行二层控制和优化,实现精馏过程质量控制目标和经济运行优化。通过对Shell多侧线精馏过程的仿真研究,验证了二层多目标优化控制策略的有效性。与DMC控制相比,二层多目标优化控制策略可以明显改善精馏塔运行的经济性,实现增加收益的目标。     

再生砖混骨料混凝土柱的小偏心受压性能

通过小偏心受压性能试验对比研究3根的天然骨料混凝土柱和3根同强度全再生砖混骨料混凝土柱,强度分别为C25、C30和C35. 对6根柱进行加载试验,分析再生砖混骨料混凝土柱相比于同强度天然骨料混凝土柱在受力过程、破坏特征、变形能力与承载力等方面的差异. 试验发现,再生砖混骨料混凝土柱在小偏心加载至破坏的过程中,具有与天然骨料混凝土柱相似的3个受力阶段,且符合平截面假定. 与同强度的天然骨料混凝土柱相比,变形较大,但再生砖混骨料混凝土柱的极限承载力略高,原因可能在于两者轴心抗压强度的差异.     

Review on the effect of heat exchanger tubes on flow behavior and heat/mass transfer of the bubble/slurry reactors

Bubble/Slurry bubble column reactors(BCR/SBCR) are intensively used as multiphase reactors for a wide range of application in the chemical, biochemical and petrochemical industries. Most of these applications involve complicate gas–liquid/gas–liquid–solid flow behavior and exothermic process, thus it is necessary to equip the BCR/SBCR with heat exchanger tubes to remove the heat and govern the performance of the reactor. Amounts of experimental and numerical studies have been carried out to describe the phenomena taking place in BCR/SBCRs with heat exchanger tubes. Unfortunately, little effort has been put on reviewing the experiments and simulations for examining the effect of internals on the performance and hydrodynamics of BCR/SBCR. The objective of this work is to give a state-of-the-art review of the literature on the effects of heat exchanger tubes with different types and configurations on flow behavior and heat/mass transfer, then provide adequate information and scientific basis for the design and the development of heat exchanger tubes in BCR/SBCR, ultimately provide reasonable suggestions for better comprehend the performance of different heat exchanger tubes on hydrodynamics.     

浅谈气力提升系统的设计

阐述了气力提升系统的组成、原理、选择原则和设计过程。并对气力提升系统与传统提升装置进行了分析、比较,指出气力提升系统具有设备性能稳定、耗能小等优点,有着很好的应用前景,值得推广。     

筒形件强力旋压新技术--浮动芯模法

提出了一种新的旋压方法－浮动芯模法。该方法采用的芯模长度尺寸较小,两端不固定加工,制造和安装非常容易。由于该方法是采用旋轮不动,工件做轴向运动,故解决了正旋所带来的工件扭曲的问题。此法用于加工长管类件,更显示出它的优越性,对改善管类件的加工具有重要的意义。     

Study on bioleaching of primary chalcopyrite ore with thermoacidophilic archae

A high temperature-tolerating thermoacidophilic archae （TA） was isolated from water samples collected from a hot sulfur-containing spring in the Yunnan Province, China, and was used in bioleaching experiments of a low-grade chalcopyrite ore. The TA grow at temperatures ranging from 40 to 80℃, with 65℃ being the optimum temperature, and at pH values of l.5 to 4.0, with an optimum pH value of 2.0. The bioleaching experiments of the chalcvpyrite ore were conducted in both laboratory batch bioreactors and leaching columns. The results obtained from the bioreactor experiments showed that the TA bioleaching rate of copper reached 97% for a 12-day leaching period, while the bioleaching rate was 32.43% for thiobacillus ferrooxidans （Tf） leaching for the same leaching time. In the case of column leaching, tests of a two-phase leaching （196 days）, that is, a two-month （56 days） Tf leaching in the first phase, followed by a 140-day TA leaching in the second phase were performed. The average leaching rate of copper achieved for the 140-day TA leaching was 195mg/（L.d）, while for the control experiments, it was as low as 78mg/（L .d） for the Tf leaching, indicating that the TA possesses a more powerful oxidizing ability to the chalcopyrite than Tf Therefore, it is suggested that the two-phase leaching process be applied to .for the heap leaching operations, whereas, the TA can be used in the second phase when the temperature inside the heap has increased, and the primary copper sulfide minerals have already been partially oxidized with Tf beforehand in the first phase.     

两室结构气弹簧

气弹簧缸体内加装了一个浮动活塞，将一室结构变成了两室结构，将密封气变成了密封油，大大减少了泄露，提高了气弹簧使用寿命。