Relationships between multiaxial stress states and internal fracture patterns in sphere-impacted silicon carbide

Internal fracture patterns developed in silicon carbide cylindrical targets as a result of dynamic indentation (63–500 m/s) by tungsten carbide spheres are defined. Microscopy of recovered and sectioned targets delineate into three regions, each associated with distinct cracking modes, i.e., shallow cone macrocracking at and near the impact surface, steep interior cone macrocracks that radiate into the target from the impact region and local grain-scale microcracking directly underneath the impact region. The observed fracture patterns are found to maintain a noticeable degree of self-similarity upto the impact velocity of 500 m/s. Linear elastic analysis of the full (surface and interior) stress field developed under static (Hertz) contact loading delineate the target into four regions, based on the number of principal stresses that are tensile (none, 1, 2 or all 3). A strong correlation is found between the principal stress conditions within each region and the forms of cracking, their locations and orientations present therein. This correlation has a number of implications, including non-interaction of crack systems, which are discussed. Illustrative linear elastic fracture mechanics analyses are performed for three regions, and calculated and observed macrocrack lengths are found to be in reasonable agreement.     

丽音（NICAM）双伴音／立体声电视广播技术

本文首先介绍了电视双伴音/立体声广播的几种常用方式,然后着重分析丽音(NICAM)双伴音/立体声广播系统的基本原理,并给出其接收系统的集成电路。     

塑钢包装箱材料贮存寿命预测

用热老化箱对4种塑钢包装箱用材进行了为期1个月的热老化试验，以材料的冲击强度作为判据指标，通过回归处理外推得到其常温下的贮存寿命预测评估结果。     

100m高烟囱拆除爆破冲击振动测试与分析

在新乡电厂百米钢筋混凝土烟囱爆破拆除工程中,布置了不同方向的两条测线共9个测点,量测了爆破和烟囱倒塌触地引起的地面质点振速和主振频率。从实测数据的分析认识到:烟囱顶部落地产生的冲击力最大,线状震源正前方测点的振速比其侧向测点的振速要大;烟囱倒塌触地产生的振动是各段筒体所产生的振动的叠加,它与各分段体的质量、位置高度、材质强度等因素有关;高大建(构)筑物落地冲击地振动的频率一般比爆破引起的地振动的频率要低;铺设缓冲材料、分段爆破等措施可减小触地冲击引起的地面振动强度。此外,利用实测数据进行拟合,得出了适用于描述本工程烟囱倒塌触地冲击地振动衰减规律的经验公式。     

A study on time schemes for DRBEM analysis of elastic impact wave

 The precise integration and differential quadrature methods are two new unconditionally stable numerical schemes to approximate time derivative with more than the second order accuracy. Recent studies showed that compared with the Houbolt and Newmark methods, they produced more accurate solutions with large time step for the problems where response is primarily dominated by low and intermediate frequency modes. This paper aims to investigate these time schemes in the context of the dual reciprocity BEM (DRBEM) formulation of various shock-excited scalar elastic wave problems, where high modes have important affect on traction response. The Houbolt method was widely recommended in many literatures for such DRBEM dynamic formulations. However, this study found that the damped Newmark algorithm was the most efficient and accurate for impact traction analysis in conjunction with the DRBEM. The precise integration and differential quadrature methods are shown inapplicable for such shock-excited problems due to the absence of numerical damping. On the other hand, we also found that to achieve the same order of accuracy, the differential quadrature method required much less computing effort than the precise integration method due to the use of the Bartels–Stewart algorithm solving the resulting Lyapunov matrix analogization equation. Received 6 November 2000     

CAD8903机芯的视频音频转换电路设计

本文概要介绍了CAD 8903机芯采用国产集成电路CD7680,CD74211,DG4053实现音频、视频切换功能的电路,并对CD7680中音频信号处理电路的特殊用法进行了说明。     

方波扫描路径确定声源声功率误差特性分析

改进了矩形测量面方波扫描路径测量声功率的误差模型 ,以单极子、偶极子及四极子声源为例 ,给出了扫描方向、测量面离声源的距离及扫描线的密度的选取对理论误差的分布图形。分析结果表明 :对选定的测量面 ,在扫描线密度小的情况下 ,通过调整声源离测量面的距离 ,可以在声源近处找到一个最优点或较优点 ,使理论误差为零或很小 ;在绝大多数情况下 ,沿测量面长边扫描误差比沿短边扫描小。     

Strain waves in colliding bars having nonparallel faces

The paper reports the experimental investigation data for the effect that nonparallel faces of bars under impact exert on the parameters of longitudinal and bending strain waves generated in the bars. The changes in stress magnitudes in the bar under impact with growing angle of the impact faces offset are described. __________ Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 6, pp. 73–78, November–December, 2006.