The Electrochemistry of the FPL (Forest Products Laboratory) Process and its Relationship to the Durability of Structural Adhesive Bonds

The FPL (Forest Products Laboratories) Process for preparing aluminum for structural adhesive bonding has been used in the aerospace industry since the early 1950's. Problems were encountered with the use of the process when the industry changed from phenolic to epoxy adhesives. In-service disbonds followed by corrosion were observed. This review article describes an investigation of the electrochemistry of the FPL etch process. Through a combination of electrochemical polarization measurements, surface chemical and surface morphological investigations and a thorough application of the Boeing wedge test, we are able to provide a mechanism of action of the FPL etch process. An oscillating electrochemical reaction was observed for low alloy aluminum which was ascribed to the dissolution and redeposition of copper on the aluminum during the etching process. A spatial variation in wedge test performance was found in that edge specimens demonstrated lower crack extensions than center specimens when using a low alloy aluminum that was etched in an FPL etch bath that was low in copper. These results are positioned in a historical perspective providing some insight into possible reasons for the irreproducibility of durability of structural adhesive bonds made with low alloy aluminum adherends that were prepared in a low copper content FPL etch bath.     

采用RFR-GA算法的薄壁注塑件质量多目标优化

汽车内饰件可由注塑加工获得,但成型过程中塑件产生的翘曲、体积收缩较大,针对该问题,以某汽车薄壁注塑件为例,研究了其注塑工艺参数的优化方法.通过以注塑过程中的最小翘曲和最小体积收缩率为目标函数,以注塑温度、模具温度、注射压力、保压压力、保压时间以及冷却时间等参数作为设计变量,构建了多目标全局优化模型.利用Moldflow...     

Mangrove forests as a nature-based solution for coastal flood protection: Biophysical and ecological considerations

Nature-based coastal protection is increasingly recognised as a potentially sustainable and cost-effective solution to reduce coastal flood risk. It uses coastal ecosystems such as mangrove forests to create resilient designs for coastal flood protection. However, to use mangroves effectively as a nature-based measure for flood risk reduction, we must understand the biophysical processes that govern risk reduction capacity through mangrove ecosystem size and structure. In this perspective, we evaluate the current state of knowledge on local physical drivers and ecological processes that determine mangrove functioning as part of a nature-based flood defence. We show that the forest properties that comprise coastal flood protection are well-known, but models cannot yet pinpoint how spatial heterogeneity of the forest structure affects the capacity for wave or surge attenuation. Overall, there is relatively good understanding of the ecological processes that drive forest structure and size, but there is a lack of knowledge on how daily bed-level dynamics link to long-term biogeomorphic forest dynamics, and on the role of combined stressors influencing forest retreat. Integrating simulation models of forest structure under changing physical (e.g. due to sea-level change) and ecological drivers with hydrodynamic attenuation models will allow for better projections of long-term natural coastal protection.     

奥林匹克森林公园人工湖营养盐与藻类生长规律研究

城市再生水回用于景观水体的主要问题是水体富营养化导致水华的暴发。奥林匹克森林公园水面是世界上迄今为止规模最大的以再生水为主要水源的人工水景,在现有处理水平下,再生水带来的营养盐会促进藻类的生长(特别是磷的影响更加显著)。通过2008年的跟踪试验,研究结果表明再生水厂出水水质稳定达标,奥林匹克森林公园水系没有出现水华,水系水质达到设计功能。     

Assessing terrestrial wildlife populations in the Toronto and Region Area of Concern

Beneficial use impairments (BUIs) under the Great Lakes Water Quality Agreement identify environmental issues requiring remedial action within the Great Lakes Areas of Concern (AOCs). We conducted this study to support the assessment of the wildlife component of BUI 3: degradation of fish and wildlife populations. We compared bird and amphibian (frogs and toads) data from the Toronto and Region Conservation Authority’s Terrestrial Long-term Monitoring Program in the Toronto and Region AOC to an adjacent, but otherwise similar, reference watershed, Duffins Creek. Twelve of 13 targets were met within the AOC for forest bird, wetland bird, meadow bird and amphibian populations based on averages of mean annual values at sites within the AOC that were within two standard deviations of averages at sites in the Duffins Creek reference watershed between 2008 and 2017. Even though wildlife populations within the AOC were within the normal range of variability expected from a reference watershed, they were often at lower levels than within the Duffins Creek reference watershed. In addition, forest bird and amphibian populations were negatively affected by urbanization within the AOC and meadow bird indices declined. We conclude that while wildlife populations within the AOC currently meet targets for BUI 3, they continue to be negatively impacted by numerous stressors that are primarily related to past and ongoing urbanization. Thus, continued restoration of wildlife habitat and protection of existing habitat within the AOC is highly recommended.     

Soil organic carbon changes in the cultivation of energy crops: Implications for GHG balances and soil quality for use in LCA

The environmental impact of different land-use systems for energy, up to the farm or forest “gate”, has been quantified with Life Cycle Assessment (LCA). Four representative crops are considered: OilSeed Rape (OSR), Miscanthus, Short-Rotation Coppice (SRC) willow and forest residues. The focus of the LCA is on changes in Soil Organic Carbon (SOC) but energy use, emissions of GreenHouse Gases (GHGs), acidification and eutrophication are also considered. In addition to providing an indicator of soil quality, changes in SOC are shown to have a dominant effect on total GHG emissions. Miscanthus is the best land-use option for GHG emissions and soil quality as it sequesters C at a higher rate than the other crops, but this has to be weighed against other environmental impacts where Miscanthus performs worse, such as acidification and eutrophication. OSR shows the worst performance across all categories. Because forest residues are treated as a by-product, their environmental impacts are small in all categories. The analysis highlights the need for detailed site-specific modelling of SOC changes, and for consequential LCAs of the whole fuel cycle including transport and use.     

Mapping woody-biomass supply costs using forest inventory and competing industry data

The goals of energy independence and sustainability have motivated many countries to consider biomass-based energy sources. The United States has substantial and increasing forest resources that could be used to produce both electricity and liquid fuel. However, these forest resources are highly heterogeneous in terms of the wood’s properties, the logging cost, the spatial distribution, and the value to other industries. These factors make predicting costs and selecting plant locations particularly challenging. When dealing with forest biomass, feedstock cost and location have frequently been highly simplified in previous studies. This paper presents a methodology for combining highly resolved forest inventory and price data with records of competing industries to develop detailed maps of feedstock availability. The feedstock sourcing strategy of the proposed bioenergy plants is modeled by a cost-minimizing linear program, as is the feedstock selection of the competing mills. A case study is performed on the southeast United States.     

Assessment of potential bioenergy from coppice forests trough the integration of remote sensing and field surveys

A spatially explicit knowledge of forest resources is essential to support the sustainable use of wood as a fuel for producing energy (firewood).This paper describes the integrated use of remotely sensed data and sample based forest inventories to derive a biomass map for coppice forest, resulted estimated potential biomass available is contrasted with local domestic consumptions at the municipality level. The test was carried out in an environmentally and socially homogeneous district of Apennine Mountains (Alto Molise, south-central Italy) coupling multispectral high resolution Landsat 7 ETM+ satellite imagery and a local forest inventory trough the application of the non-parametric estimation procedure k-Nearest Neighbours (k-NN). Several forest management scenarios were applied in order to evaluate their impact on the potential availability of firewood from coppice forests.The paper introduces data and methods used and presents the achieved results both in terms of the accuracy of the biomass map produced by k-NN and of the relationship between the potential availability and demand for firewood.These results demonstrated that k-NN is able to estimate the biomass of coppice forest in the test area with an accuracy level comparable with recent similar application of k-NN carried out in Boreal regions (RMSE of 25.6%).The application of different forest management scenarios have a significant impact on local estimated firewood balance between potential supply from coppice forests and demand for domestic consumption, depending of the scenarios the net balance changed up to 84%.     

Recovery rates of logging residue harvesting in Norway spruce (Picea abies (L.) Karsten) dominated stands

A significant amount of logging residues is available for recovery in clear-cut areas. The forest residues’ potential has usually been estimated using biomass models. In Norway spruce (Picea abies) dominated stands, a large share of material is left on site especially due to dropping of needles as residues are left on site to dry in small heaps. In this study, we compared the measured dry weight of logging residues at a power plant with the potential biomass estimations made at a stand level. The study was performed in eight Norway spruce dominated stands, three of which were located in eastern Finland (North Karelia region) with the remainder being in Central Finland. The dry weights of branches, needles and stem tops were estimated using biomass models developed for individual trees by Repola et al. [1]. These dry weights were also compared with Swedish biomass models produced by Marklund [2]. The diameter and tree height information of each harvested tree served as input data in these model-based computations. Tree diameter information was obtained straight from the harvester’s stem value files, while the height information was obtained from models using the data from the stem value files as input. Inventory data before logging was used as a control material for harvester based estimates to spot possible measurement errors on the harvester measurement data. In addition, inventory data were used to get the crown height information, which was not available in the harvester measurement data. It was found that the average recovery rate was approximately 62% when applying Repola’s et al. [1] models and 61% when applying Marklund’s [2] models. However, variation between the logging sites was high. According this study, at least a third of the residues remains on the logging site if they are seasoned during the spring and summertime in small heaps.     

Wood fuel trade in European Union

Wood fuels are the most important alternatives of fossil fuel which is one of the reasons of the climate changes in the world and of global warming. Wood fuels, which have an important role in the cause of both providing energy requirement of production units and heating for household and healing energy deficit, disperse very less CO₂ than fossil fuels to atmosphere. Bio-fuels are used to provide energy requirement among EU countries like using in lots of developed countries. Resources having by lots developed countries and EU countries are not at enough level for bio-fuels. For this reason, trade of bio-fuels has been become in an important situation in recent years. In this study, import and export levels of bio-fuels of EU countries and Turkey, which is a candidate for union, were investigated between 2003 and 2006. The date is obtained from European Forest Institute (EFI) forest products trade flow database. As a result of the study, while rises were determined in years, it is determined that the most important exporters are Germany, Italy, Latvia and Poland and the most important importers are Germany, Italy, Belgium and UK. It is seen that Turkey has a low trade level in selected product groups.