Aboveground biomass retrieval in tropical forests — The potential of combined X- and L-band SAR data use

In the context of reducing emissions from deforestation and forest degradation (REDD) and the international effort to reduce anthropogenic greenhouse gas emissions, a reliable assessment of aboveground forest biomass is a major requirement. Especially in tropical forests which store huge amounts of carbon, a precise quantification of aboveground biomass is of high relevance for REDD activities. This study investigates the potential of X- and L-band SAR data to estimate aboveground biomass (AGB) in intact and degraded tropical forests in Central Kalimantan, Borneo, Indonesia. Based on forest inventory data, aboveground biomass was first estimated using LiDAR data. These results were then used to calibrate SAR backscatter images and to upscale the biomass estimates across large areas and ecosystems. This upscaling approach not only provided aboveground biomass estimates over the whole biomass range from woody regrowth to mature pristine forest but also revealed a spatial variation due to varying growth condition within specific forest types. Single and combined frequencies, as well as mono- and multi-temporal TerraSAR-X and ALOS PALSAR biomass estimation models were analyzed for the development of accurate biomass estimations. Regarding the single frequency analysis overall ALOS PALSAR backscatter is more sensitive to AGB than TerraSAR-X, especially in the higher biomass range (> 100 t/ha). However, ALOS PALSAR results were less accurate in low biomass ranges due to a higher variance. The multi-temporal L- and X-band combined model achieved the best result and was therefore tested for its temporal and spatial transferability. The achieved accuracy for this model using nearly 400 independent validation points was r² = 0.53 with an RMSE of 79 t/ha. The model is valid up to 307 t/ha with an accuracy requirement of 50 t/ha and up to 614 t/ha with an accuracy requirement of 100 t/ha in flat terrain. The results demonstrate that direct biomass measurements based on the synergistic use of L- and X-band SAR can provide large-scale AGB estimations for tropical forests. In the context of REDD monitoring the results can be used for the assessment of the spatial distribution of the biomass, also indicating trends in high biomass ranges and the characterization of the spatial patterns in different forest types.     

Satellite image-based maps: Scientific inference or pretty pictures?

The scientific method has been characterized as having two distinct components, Discovery and Justification. Discovery emphasizes ideas and creativity, focuses on conceiving hypotheses and constructing models, and is generally regarded as lacking a formal logic. Justification begins with the hypotheses and models and ends with a valid scientific inference. Unlike Discovery, Justification has a formal logic whose rules must be rigorously followed to produce valid scientific inferences. In particular, when inferences are based on sample data, the rules of the logic of Justification require assessments of bias and precision. Thus, satellite image-based maps that lack such assessments for parameters of populations depicted by the maps may be of little utility for scientific inference; essentially, they may be just pretty pictures. Probability- and model-based approaches are explained, illustrated, and compared for producing inferences for population parameters using a map depicting three land cover classes: non-forest, coniferous forest, and deciduous forest. The maps were constructed using forest inventory data and Landsat imagery. Although a multinomial logistic regression model was used to classify the imagery, the methods for assessing bias and precision can be used with any classification method. For probability-based approaches, the difference estimator was used, and for model-based inference, a bootstrap approach was used.     

Forest biomass mapping from lidar and radar synergies

The use of lidar and radar instruments to measure forest structure attributes such as height and biomass at global scales is being considered for a future Earth Observation satellite mission, DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice). Large footprint lidar makes a direct measurement of the heights of scatterers in the illuminated footprint and can yield accurate information about the vertical profile of the canopy within lidar footprint samples. Synthetic Aperture Radar (SAR) is known to sense the canopy volume, especially at longer wavelengths and provides image data. Methods for biomass mapping by a combination of lidar sampling and radar mapping need to be developed.In this study, several issues in this respect were investigated using aircraft borne lidar and SAR data in Howland, Maine, USA. The stepwise regression selected the height indices rh50 and rh75 of the Laser Vegetation Imaging Sensor (LVIS) data for predicting field measured biomass with a R² of 0.71 and RMSE of 31.33 Mg/ha. The above-ground biomass map generated from this regression model was considered to represent the true biomass of the area and was used as a reference map since no better biomass map exists for the area. Random samples were taken from the biomass map and the correlation between the sampled biomass and co-located SAR signature was studied. The best models were used to extend the biomass from lidar samples into all forested areas in the study area, which mimics a procedure that could be used for the future DESDYnI mission. It was found that depending on the data types used (quad-pol or dual-pol) the SAR data can predict the lidar biomass samples with R² of 0.63-0.71, RMSE of 32.0-28.2 Mg/ha up to biomass levels of 200-250 Mg/ha. The mean biomass of the study area calculated from the biomass maps generated by lidar-SAR synergy was within 10% of the reference biomass map derived from LVIS data. The results from this study are preliminary, but do show the potential of the combined use of lidar samples and radar imagery for forest biomass mapping. Various issues regarding lidar/radar data synergies for biomass mapping are discussed in the paper.     

Mapping wildfire and clearcut harvest disturbances in boreal forests with Landsat time series data

Information regarding the extent, timing and magnitude of forest disturbance are key inputs required for accurate estimation of the terrestrial carbon balance. Equally important for studying carbon dynamics is the ability to distinguish the cause or type of forest disturbance occurring on the landscape. Wildfire and timber harvesting are common disturbances occurring in boreal forests, with each having differing carbon consequences (i.e., biomass removed, recovery rates). Development of methods to not only map, but distinguish these types of disturbance with satellite data will depend upon an improved understanding of their distinctive spectral properties. In this study, we mapped wildfires and clearcut harvests occurring in a Landsat time series (LTS) acquired in the boreal plains of Saskatchewan, Canada. This highly accurate reference map (kappa = 0.91) depicting the year and cause of historical disturbances was used to determine the spectral and temporal properties needed to accurately classify fire and clearcut disturbances. The results showed that spectral data from the short-wave infrared (SWIR; e.g., Landsat band 5) portion of the electromagnetic spectrum was most effective at separating fires and clearcut harvests possibly due to differences in structure, shadowing, and amounts of exposed soil left behind by the two disturbance types. Although SWIR data acquired 1 year after disturbance enabled the most accurate discrimination of fires and clearcut harvests, good separation (e.g., kappa ≥ 0.80) could still be achieved with Landsat band 5 and other SWIR-based indices 3 to 4 years after disturbance. Conversely, minimal disturbance responses in near infrared-based indices associated with green leaf area (e.g., NDVI) led to unreliably low classification accuracies regardless of time since disturbance. In addition to exploring the spectral and temporal manifestation of forest disturbance types, we also demonstrate how Landsat change maps which attribute cause of disturbance can be used to help elucidate the social, ecological and carbon consequences associated with wildfire and clearcut harvesting in Canadian boreal forests.     

多波段多极化成像雷达图象识别森林类型效果分析

要陕西省宜川县三北防护林地区获取的航天飞机成像雷达ＳＩＲ－Ｃ／Ｘ－ＳＡＲ数据为基础,进行了森林类型的识别与分类,区分出针叶林、阔叶林和混交林３种森林类型,并通过从ＳＩＲ－Ｃ／Ｘ－ＳＡＲ数据中提取这３种类型森林的后向散射系数,分析了多波段、多极化雷达在森林类型识别中的作用。     

基于OGRE引擎的森林场景渲染研究

森林场景的实时渲染仍然是图形学领域的一大难题。针对森林场景的复杂性和大数据量等特点,该文在OGRE图形引擎的基础上,通过八叉树结合OGRE中的静态几何体的方法实现大规模森林场景的实时渲染。实验结果表明通过这种方法能够在实时渲染的基础上仍能保持较好的视觉效果。     

一种关系模式下转换XML文档查询的有效方法*

在用关系数据库进行存储和管理XML数据的系统中,将XQuery查询语句转换为相应的SQL查询语句是一个重要的挑战。且由于这种转换依赖于关系模式生成技术,这就要求各种生成技术构造自己的查询处理器。该方法使得SilkRoute算法适用于更多的技术,并针对存取XML顺序信息的需求,改进了SilkRoute中的数据结构和算法,使之能正确转换基于顺序信息的XQuery查询。     

Remote sensing image classification based on neural network ensemble algorithm

The amounts and types of remote sensing data have increased rapidly, and the classification of these datasets has become more and more overwhelming for a single classifier in practical applications. In this paper, an ensemble algorithm based on Diversity Ensemble Creation by Oppositional Relabeling of Artificial Training Examples (DECORATEs) and Rotation Forest is proposed to solve the classification problem of remote sensing image. In this ensemble algorithm, the RBF neural networks are employed as base classifiers. Furthermore, interpolation technology for identical distribution is used to remold the input datasets. These remolded datasets will construct new classifiers besides the initial classifiers constructed by the Rotation Forest algorithm. The change of classification error is used to decide whether to add another new classifier. Therefore, the diversity among these classifiers will be enhanced and the accuracy of classification will be improved. Adaptability of the proposed algorithm is verified in experiments implemented on standard datasets and actual remote sensing dataset.     

A mobility constraint model to infer sensor behaviour in forest fire risk monitoring

Wireless sensor networks (WSNs) play an important role in forest fire risk monitoring. Various applications are in operation. However, the use of mobile sensors in forest risk monitoring remains largely unexplored. Our research contributes to fill this gap by designing a model which abstracts mobility constraints within different types of contexts for the inference of mobile sensor behaviour. This behaviour is focused on achieving a suitable spatial coverage of the WSN when monitoring forest fire risk. The proposed mobility constraint model makes use of a Bayesian network approach and consists of three components: (1) a context typology describing different contexts in which a WSN monitors a dynamic phenomenon; (2) a context graph encoding probabilistic dependencies among variables of interest; and (3) contextual rules encoding expert knowledge and application requirements needed for the inference of sensor behaviour. As an illustration, the model is used to simulate the behaviour of a mobile WSN to obtain a suitable spatial coverage in low and high fire risk scenarios. It is shown that the implemented Bayesian network within the mobility constraint model can successfully infer behaviour such as sleeping sensors, moving sensors, or deploying more sensors to enhance spatial coverage. Furthermore, the mobility constraint model contributes towards mobile sensing in which the mobile sensor behaviour is driven by constraints on the state of the phenomenon and the sensing system.