乳山硫铁矿破碎工艺的改进

原矿含泥量大造成设备的堵塞。根据现场生产实际改用粉碎后的矿粒直接给入扇形孔条筛，筛下可调刮板使细粒均匀分布在皮带下面，粗粒复盖其上。物料到达皮带首轮处，使其呈抛掷状态，然后利用分离挡板除去细粒。首轮的直径和转速是按粒度分离的决定因素。分离细粒级后使中碎机生产能力增大，降低能耗，减少磨损，提高了设备运转率。     

飞机大直径低压导管粘接修理

为适应外场快速修补的需要，在分析现有飞机损伤导管不同修理方法优缺点的基础上，通过筛选胶粘剂和修理试验，提出了大直径低压导管粘接修理工艺，为飞机导管损伤修理提供了一种新的方法。     

用混合式遗传算法进行给水管网现状分析

将广义简约梯度法(GRG)思想应用于传统遗传算法,提出一种新的混合式遗传算法(HGA),此方法具有很强的全局和局部搜索能力,并且无需复杂的编码、解码过程,可以准确解决多变量、多峰值的给水管网现状分析问题。采用此算法,绝大多数的计算值与实测值的误差可减小到1%以下,能准确反映管网的实际工况。     

新型可见光固化口腔正畸粘合剂研制

介绍了一种新型可见光固化正畸粘合剂的组成、性能及正畸粘接的工艺。此粘合剂由一种单组分液体底胶和单组分糊剂组成。与化学固化粘合剂相比,其操作使用方便,固化时间短。这种新型粘合剂的粘接强度完全满足了正畸粘合剂的要求。     

Genome-wide genetic diversity may help identify fine-scale genetic structure among lake whitefish spawning groups in Lake Erie

In Lake Erie, lake whitefish Coregonus clupeaformis supported lucrative fisheries before populations were decimated by overfishing and water quality degradation. In recent years, there has been a renewed interest in lake whitefish and management of the fishery they support. Lake whitefish spawn on several reefs throughout Lake Erie, but the relative recruitment dynamics and contributions of spawning groups to the fishery are not well understood. Modern high-throughput sequencing approaches offer new opportunities to census population diversity and to identify subtle differences among closely related populations. We used high-throughput sequencing data to evaluate the genetic structure and diversity of lake whitefish collected opportunistically across broad spatial scales in Lake Erie. Using RAD-capture (Rapture), we sequenced and genotyped individuals (N = 88) from the west, central, and east basin of Lake Erie at 120,268 single nucleotide polymorphisms (SNPs). Lake whitefish from Niagara and Crib Reefs (west basin) diverged from the three collections. Interestingly, these were the only lake whitefish collected during the act of spawning (late November), and all other fish were collected pre-spawn (August-early November). These results suggest that some lake whitefish spawning reefs may be reproductively isolated, though definition of these groups into stocks will require more intentional sampling during the act of spawning.     

力化学法制备金属－NR硫化粘合用CSM－NR接枝聚合物

用开炼机，通过力化学方法，将ＮＲ／ＣＳＭ（质量比为１０／９０）制成４５￣＃钢－ＮＲ硫化粘合剂用接枝聚合物。当橡胶本体１００％破坏时，１８０°剥离强度为２３．６～２４．６ｋＮ／ｍ。     

An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints

In this paper, manufacturing technology of the tubular single lap adhesive joint was studied to obtain reliable and optimal joint quality. In addition, a surface preparation method and a bonding process for the joint were devised. The effect of the adhesive thickness and the adherend roughness on the fatigue strength of the joint was experimentally investigated. From experiments, it has been found that the fatigue strength of the joint increased as the adhesive thickness decreased and the optimal arithmetic surface roughness of the adherends was about 2 μm.     

Physical crosslinking effects in α,ω-dihydroxy terminated polybutadienes

Structure and molecular dynamics of α,ω-dihydroxy terminated polybutadienes of varying number averaged molecular weight (1320-10?500 g/mol) have been investigated by Fourier-transformed infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, dielectric relaxation spectroscopy (DRS), differential scanning calorimetry (DSC) and wide-angle X-ray scattering (WAXS). DSC and DRS revealed an increase in the glass transition temperature upon decrease of the molecular weight, accompanied by an increasing dynamic fragility m (or steepness index) of the dielectric α-process. This correlation between T_g and m for different molecular weights indicates the presence of a physical network, where H-bonded end-group clusters act as temporary crosslinks. From the dielectric relaxation strength Δ?_α(M_n), the fraction of associated hydroxy groups (f_bond) was estimated showing a peak value for the two but shortest polymers, a behaviour that strongly resembles the molecular weight dependence of the fragility. By considering the quantity f_bond(M_n) in a modified Fox-Flory approach, the measured T_g(M_n) behaviour could be reproduced in a satisfying way. FTIR results support this general picture and show a considerable dependence of the extent of hydrogen bonding and formation of hydroxy groups associates on the molecular weight. Further, WAXS and DSC results disprove the idea of formation of pseudo-crystalline hydrophobic microdomains in these compounds as suggested by other authors.     

Random Forests with ensemble of feature spaces

Random Forests receive much attention from researchers because of their excellent performance. As Breiman suggested, the performance of Random Forests depends on the strength of the weak learners in the forests and the diversity among them. However, in the literature, many researchers only considered pre-processing of the data or post-processing of the Random Forests models. In this paper, we propose a new method to increase the diversity of each tree in the forests and thereby improve the overall accuracy. During the training process of each individual tree in the forest, different rotation spaces are concatenated into a higher space at the root node. Then the best split is exhaustively searched within this higher space. The location where the best split lies decides which rotation method to be used for all subsequent nodes. The performance of the proposed method here is evaluated on 42 benchmark data sets from various research fields and compared with the standard Random Forests. The results show that the proposed method improves the performance of the Random Forests in most cases.     

Processing study of a high temperature adhesive

An adhesive-bonding process cycle study was performed for a polyimidesulphone. The high molecular weight, linear aromatic system possesses properties which make it attractive as a processable, low-cost material for elevated temperature applications. The results of a study to better understand the parameters that affect the adhesive properties of the polymer for titanium alloy adherends are presented. These include the tape preparation, the use of a primer and press and simulated autoclave processing conditions. The polymer was characterized using Fourier transform infrared spectroscopy, glass transition temperature determination, flow measurements, and weight loss measurements. The lap shear strength of the adhesive was used to evaluate the effects of the bonding process variations.