Use of mesoporous SBA-15 for nanostructuring titania for photocatalytic applications

SBA15–TiO₂ samples prepared by introducing titanium with a grafting method and having TiO₂ loadings below 15 wt.% have been characterized by XRF, XRD, IR, porosimetry, SEM, HRTEM, and UV–Visible diffuse reflectance. Differently from the samples reported in the literature characterized by a high TiO₂ loading, no evidences have been found for the presence of titania particles inside or outside the mesopores of SBA-15. Three different titanium species were instead evidenced to be present. The first two derive from the reaction of titanium with silanol groups in the corona area of inner SBA-15 walls leading to the formation of either TiO₄ tetrahedral sites (by reaction by hydroxyl nests of surface defect sites) and/or pseudo-octahedral surface sites anchored by two (or more) Si or Ti ions through bridging oxygens. The third species derives from the reaction of titanium in the regions with high sylanol density, e.g. in the micropores located in the corona of SBA-15 channels, leading to the formation of TiO₂-like nanoareas (probably Si-doped) with dimensions of around 1–2 nm maximum. The potential interest of these materials as photocatalysts, for the presence of a TiO₂-like nanoareas highly accessible by reactants, is discussed.     

A polyamide-silica composite prepared by the sol-gel process

Summary A new kind of organic-inorganic hybrid composite was prepared by means of the sol-gel process. The polymer employed was a mixed-isomer aromatic polyamide having good solubility and thermal stability. The silica constituting the inorganic phase was produced by the hydrolysis and condensation of tetramethoxysilane. The bonding between the phases involved aminophenyl-trimethoxysilane, in which the amino group can react with the phthaloyl chloride end-capped polymer, and the methoxysilane groups undergo hydrolysis. The composition of these composites was varied by changing the linear polymer chain length and relative amount of tetramethoxysilane. The gelation time was found to range from a few minutes to several days. Thermogravimetric analyses showed that decomposition starts at approximately 450 °C. Thin films cast from materials having a relatively high silica content were opaque and rigid, but those with low silica content were flexible and transparent.     

熔融石英耐火材料

阐述了熔融石英耐火材料的主要性能与应用领域。     

REVERSED RESIDUALS IN AUTOREGRESSIVE TIME SERIES ANALYSIS

Abstract. Both linear and non-linear time series can have directional features which can be used to enhance the modelling and investigation of linear or non-linear autoregressive statistical models. For this purpose, reversed p th-order residuals are introduced. Cross-correlations of residuals and squared reversed residuals allow extensions of current model identification ideas. Quadratic types of partial autocorrelation functions are introduced to assess dependence associated with non-linear models which nevertheless have linear autoregressive correlation structures. The use of these residuals and their cross-correlation functions is exemplified empirically on some deseasonalized river flow data for which a first-order autoregressive model is a satisfactory second-order fit. Parallel theoretical computations are undertaken for the non-linear first-order random coefficient autoregressive model and comparisons are made. While the data are shown to be strongly non-linear, their correlational signatures are found to be convincingly different from those of a first-order autoregressive model with random coefficients.     

MgO／Ni系梯度功能材料的设计与制备

对ＭｇＯ／Ｎｉ系梯度功能材料（ＦＧＭ），分别用实验和微观力学模型测定和计算了用于热应力缓和设计的各物性参数。讨论了两种结果之间存在差异的原因。用有限元方法模拟了制备过程中ＦＧＭ的热应力，得到ＭｇＯ／Ｎｉ系ＦＧＭ的综合设计准则。按设计结果进一步调整粉末工艺性质，成功地烧制出ＭｇＯ／Ｎｉ系ＦＧＭ。     

Outlook on fertilizer use efficiency in the tropics

In this paper efficiency of applied fertilizers under tropical conditions is examined. Understanding of the fertilizer efficiency is particularly important for the developing countries mainly because there is need for enhancement of crop yields at a reduced cost. Many of the soil, plant and climatic factors of the tropical regions that contribute to the efficiency of the applied fertilizers have been discussed. Many of the tropical soils are acidic in nature and in these soils efficiency of applied fertilizer is relatively poor, mainly because plant roots are unable to grow and function to their fullest extent in utilizing the soils available nutrients. To enhance yield potentials there is need for understanding of interaction between crop species and soil and climatic variables. Incorporation and adoptation of a suitable application time can greatly enhance efficiency of urea form of nitrogen. Research findings in tropical soils have shown that an initial broadcast application of P and subsequent band treatment is more effective than either method of application alone. Current crop yields in tropical countries are far below the known yield potentials. Such low production potentials are attributed to the lack of suitable crop germplasms and understanding of improved agronomic practices. Intensification of research activities in fertilizer use efficiency in tropical countries is suggested.Senior author formerly was a Research Advisor to EMBRAPA/IICA/World Bank Program in Brazil.     

纳米SiO2粉体的制备与研究

纳米SiO2粉体的制备是以硅酸钠和盐酸为原料，添加适宜的稳定剂(非离子表面活性剂)和分散剂，在适宜的pH值和温度下，采用化学沉淀法合成。研究表明，要得到性能优良纳米的SiO2粉体，最佳工艺条件为：温度20～40℃，pH=6，反应液质量浓度P1=20g／L，P2=1．20g／L，反应时间15min。结果表明：制备的纳米SiO2粒径30～50nm，比表面积大，分散性好，质量优良，可达到产业化的生产。     

Organic-inorganic hybrid materials from a new octa(2,3-epoxypropyl)silsesquioxane with diamines

Hybrid materials based on a new polyhedral oligomeric silsesquioxane, octa(2,3-epoxypropyl)silsesquioxane (OE) with diamines of 4,4′-methylenedianiline (DDM) and 5-trifluoromethyl-1,3-phenylenediamine (FPA) were prepared and characterized. OE was synthesized from cage-structured octaallylsilsesquioxane (OA) with m-chloroperbenzoicacid. The FTIR studies suggested that the N-H bond in diamines was not completely reacted with epoxy group due to steric hindrance and also extensive hydrogen bonding existed in the hybrid materials. The retention of the cage structure in the prepared hybrid materials was suggested by the FTIR and ²⁹Si NMR studies. The OE/FPA hybrid materials had superior thermal/mechanical characteristics than the OE/DDM due to the higher rigidity of the FPA than that of DDM or the silicon-fluorine interaction enhancing crosslinking reaction or hydrogen bonding. The prepared OE/FPA had a T_g of 170 °C, which was higher than diglycidyl ether of bisphenyl A (DGEBA)/DDM at the same stoichiometric ratio. It also had excellent thermal, mechanical, and dielectric characteristics with high storage modulus of 1.8 GPa (30 °C) and 0.3 GPa (250 °C), low coefficient of thermal expansion of 86 μm/m °C, and dielectric constant of 2.19. Thus, it can be high performance materials with potential applications for electronic packaging.     

Synthesis and Characterization of Al-MCM-41 and Al-MCM-48 Mesoporous Materials

A novel route in the synthesis of Al-MCM-41 and Al-MCM-48, using tetraethoxysilane (TEOS) and sodium aluminate (NaAlO₂) as Si and Al source has been obtained. The effect of surfactant nature and the synthesis conditions such as surfactant/Si ratio and hydrothermal treatment time on the formed mesostructure regularity has been studied. Different methods of template removal have also been evaluated. The samples were characterized by X-ray diffraction, nitrogen physisorption, FT-IR, and solid-state MAS NMR spectroscopy.