金属矿山深热矿井空气温度的灰色预测

金属矿山深热矿井气温的预测计算是一个难题，本文探讨了应用灰色系统预测理论来解决这一难题的新途径，并通过实例验证了该方法的可行性和有效性。     

Electrical properties at p-ZnSe/metal interfaces

In order to prepare low resistance ohmic contacts to p-ZnSn by the “deposition and annealing (DA)” technique which has been extensively used for GaAs and Si-based devices, formation of a heavily doped layer by the p-ZnSe/metal reaction is required. For p-ZnSe/Ni contacts, Ni and Se reacted preferentially at the ZnSe/Ni interface upon annealing at temperatures higher than 250°C. However, capacitance-voltage measurements showed that the net acceptor concentration (N_A-N_D) close to the p-ZnSe/Ni interface was reduced upon the Ni/ZnSe reaction, resulting in high contact resistance. For p-ZnSe/Au contacts, neither Au/ZnSe reaction nor reduction of the acceptor concentration were observed after annealing at temperatures lower than 300°C. This indicates that although the metal/p-ZnSe reaction is mandatory to prepare a heavily doped layer, the reaction induced an increase in the compensation donors in the p-ZnSe substrate. In order to increase the acceptor concentration in the vicinity of the p-ZnSe/metal interface through diffusion from the contact materials, Li or O which was reported to play the role of an acceptor in ZnSe was deposited with a contact metal and annealed at elevated temperatures. Ni or Ag was selected as the contact metal, because these metals were expected to enhance Li or O doping by reacting with ZnSe. However, the current density-voltage characteristics of the Li(N)/Ni and Ag(O) contacts exhibited rectifying behavior, and the contact resistances increased with increasing annealing temperature. The present results indicated that, even though the acceptor concentration in the p-ZnSe substrate increased by diffusion of the dopants from the contact elements, an increment of the compensation donors was larger than that of the acceptors. The present experiments indicated that preparation of low resistance ohmic contacts by forming a heavily doped intermediate layer between p-ZnSe and metal is extremely difficult by the DA technique.     

含钒铁水中硅,钛含量对炼钢,炼铁工序指标的影响

利用生产实践数据，分析了铁水中Ｓｉ＋Ｔｉ含理对炼铁焦比、产量、生铁Ｓ以及提钒时的钒回收率、钒渣品位、白灰消耗等工序指标的影响，提出了适合于承钢铁水的Ｓｉ＋Ｔｉ含量。     

金属快速凝固方法的数学模型

本文综述了与几种典型的快速凝固方法相应的数学模型，并对每种模型作了相应的分析和评价。文中重点介绍了“活塞－砧法”，“双辊法”，“单辊法”和“雾化沉积法”数学模型的理论基础，建模过程，理论优缺点及实用局限性。     

Synthesis,Functionalization, and Bioconjugation of Monodisperse,Silica‐Coated Gold Nanoparticles: Robust Bioprobes

Herein, we report an efficient process for preparing monodisperse Au@SiO₂ nanoparticles using homogeneous shaking and without the use of surface‐coupling silane agents or large stabilizers. The resulting pure‐silica surface of the Au@SiO₂ nanoparticles is very important for straightforward surface functionalization with different functional groups via well‐established silica surface chemistry. Subsequent covalent bioconjugation of the aldehyde‐functionalized Au@SiO₂ nanoparticles with various biomolecules is successfully employed to make robust nanoprobes for fast, colorimetric DNA and protein detection based on the sequence‐specific hybridization properties of DNA and the specific binding affinity between proteins, respectively.     

石油天然气长输管线用钢新进展

本文介绍了１９９０年以来国外在石油天然气长输管线用钢方面的最新成果，以获得较低的强度和韧性匹配为目的经轧后加速冷却工艺后的钢的强度的预测和控制；具有优良抗氢致裂纹的含硼、微碳、低硫、Ｎｂ－Ｔｉ微合金化、Ｘ６５－Ｘ８０级管线钢的开发，满足于特殊性能要求的ＴｉＯ处理技术及Ｘ８０级ＴｉＯ细化晶粒钢、低硬度和低屈强比钢，以及复合板加工耐腐蚀钢管的生产。     

圆盘式高速金属冷锯机锯切功率的实验研究

对１６００圆盘式高速金属冷锯机进行了锯切功率的实验研究。对某厂四种有代表性的产品，用不同的进锯速度，实测每种条件下的锯切功率变化，和最大瞬时锯切功率与平均锯切功率之比。并以实测数据为基础，得出每种产品以进锯速度为自变量的平均锯切功率回归公式。这些工作，不仅可以为这种冷锯机锯切功率的理论研究提供依据，还可直接为使用和设计这种冷锯机给出具体参考数据。     

Stress concentration and fatigue of profiled reinforcing steels

Stress concentrations arise from profiles of ribbed reinforcing steel bars and in this study the results of calculated stress concentration factors (SCF), by using finite element method, are related to the fatigue test results. It is apparent that the degree of confinement of a ribbed bar embedded in concrete not only affects the magnitude of the ultimate bond stress but also the bond stress-slip relation. Thus the rib geometry or profile pattern is designed for optimum bond characteristics and not for fatigue considerations. However the rib geometry influences the fatigue performance through the SCFs arising from the root radius, width and flank angles of the profiles. It is shown that these latter factors have a significant influence on the fatigue behaviour of reinforcing steel bars.     

孟加拉HATHAZARI 132kV电缆回流线取舍探讨

针对孟加拉Hathazari 100MW重油发电机组EPC工程132kV电缆现场实际设计、采购和敷设情况,通过理论计算探讨回流线取舍问题。