露天矿山深-浅耦合台阶爆破方法研究及应用

爆破大块率高一直是困扰国内外众多露天矿山的技术难题,银山矿露天采矿场由于采区地质条件复杂,爆破大块率高的现象尤为明显。为此,针对露天采矿场岩性复杂易产生大块的区域,基于岩石的物理力学性质,计算出千枚岩和斑岩爆破区域需增设的短孔孔位。为减少爆破大块的产生率,提出了中深孔爆破方法—深-浅耦合台阶爆破方法。在银山矿露天采矿场实施深-浅耦合台阶爆破方法后,爆破大块率得到有效控制并取得了显著的社会及经济效益。     

碳质金矿中碳质物及其“劫金”机理研究进展

碳质金矿是重要的难处理金矿资源之一,碳质物“劫金”是金浸出率低下的主要原因。碳质物组分复杂,不同组分的碳质物的“劫金”能力和“劫金”行为存在差异,磨矿和浸出环节对碳质物的“劫金”能力也会产生影响,这些因素均能直接影响金的浸出率。通过系统总结碳质金矿中碳质物在组成特征、“劫金”机理及“劫金”能力的影响因素等方面的研究进展,对碳质物“劫金”机理现有研究工作的不足及未来研究方向进行了探讨,为碳质金矿碳质物劫金机理及预处理工艺的研究提供了重要参考。     

含钼废渣冶炼钼铁的优化试验

利用含钼废料钼酸钙为原料,采用碳还原法冶炼钼铁,通过单因素分析试验及正交试验优化得出最佳的试验条件,钼酸钙加入量应低于10%,熔炼温度为1 525 ℃,保温时间为25 min,碱度为1.3。通过XRD、SEM、EDS分析得出用此方法生产得到的钼铁合金中,钼以Mo₂C、Fe₃Mo以及Fe₃Mo₃C的形式存在,渣系为二元玻璃渣系,具有与普通玻璃相似的成分系统。经测定合金中钼的回收率大于99%,钼资源回收效益可观。     

复吹转炉“留渣 双渣”脱磷工艺试验

摘要：在国内某转炉钢厂采用“留渣 双渣”工艺技术进行脱磷工艺试验。结果表明：随着转炉前期脱磷率不断升高,终点脱磷率不断提高。铁水硅含量对前期脱磷率的影响最大。根据铁水成分,在冶炼前期适当降低供氧强度、降低气固氧比、加入适量石灰及烧结矿,均有利于前期脱磷率的提高。在一倒时每吨钢液加入4~8kg石灰,不影响出钢温度,可提高一倒-终点阶段脱磷率,同时可提高终点脱磷率。从终点的控制效果可知,终点炉渣碱度应保持不小于3.0,炉渣中FeO质量分数在16%~20%,并适当降低终点出钢温度在1610~1630℃,有利于终点脱磷率的提高。通过加强熔池搅拌,促进钢渣反应趋于平衡,有利于终点磷分配比提高,从而可进一步提高终点脱磷率。     

少片渐变刚度钢板弹簧的优化设计与计算

讨论了渐变刚度钢板弹簧的载荷、变形量、刚度和应力的计算，建立了少片渐变刚度钢板弹簧的优化数学模型，利用MATLAB优化工具箱进行优化，并给出了计算实例。     

Numerical Analysis of the Constrained Blister Test

The constrained blister test is investigated through finite element analysis to determine the applicabilities and the limitations of the new technique. Numerical results confirm that the strain energy release rate asymptotically approaches a constant value. These results also show that the test technique and the approximate solution for strain energy release rate are applicable for some practical cases.     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

Estimating oxygen consumption from heart rate using adaptive neuro-fuzzy inference system and analytical approaches

In new approaches based on adaptive neuro-fuzzy systems (ANFIS) and analytical method, heart rate (HR) measurements were used to estimate oxygen consumption (VO₂). Thirty-five participants performed Meyer and Flenghi's step-test (eight of which performed regeneration release work), during which heart rate and oxygen consumption were measured. Two individualized models and a General ANFIS model that does not require individual calibration were developed. Results indicated the superior precision achieved with individualized ANFIS modelling (RMSE = 1.0 and 2.8 ml/kg min in laboratory and field, respectively). The analytical model outperformed the traditional linear calibration and Flex-HR methods with field data. The General ANFIS model's estimates of VO₂ were not significantly different from actual field VO₂ measurements (RMSE = 3.5 ml/kg min). With its ease of use and low implementation cost, the General ANFIS model shows potential to replace any of the traditional individualized methods for VO₂ estimation from HR data collected in the field.