The experimental and numerical impacts of geometrical parameters of conical shock tube on the function,maximum pressure and generative impulses to expose equivalent mass and behavioral equation

One of the methods to investigate the phenomenon of explosion underwater and its impact on the structures is to use the conical shock tube. These tubes produce a lot of pressure using a tiny explosive charge. In this essay, the geometry of the established/manufactured explosive shock tube is demonstrated first and the results of the experiments operating the tube is presented. Then, the explosion of a given amount of explosive charge in the conical shock tube is studied by benefiting the LS‐DYNA code. The numerical simulation is done by Lagrange‐Oiler selected multi‐materials solutions. To ensure the authenticity of the selected method in the software, the results of the stimulated model is compared with the experimental outcomes accordingly, after accrediting the accuracy of the results, the stimulating and scrutinizing the effects of geometrical parameters on the function of explosive shock tubes is proceeded. In this research, the effect of the cone head angel on the produced pressure inside the shock tube is analyzed first. Then, the function of shock tubes with different lengths is checked. Moreover, after changing the scale of the explosive charge and studying the outcome, stating the reasons for changes in each parameter and examining the effect of the relation between the explosive proportion and the water volume inside the shock tube, an equation for the equivalent mass for all sock tubes with different angels is exhibited and the existing theoretical relation is revised. Finally, by examining the pressure and impulses changes in different intervals, an equation is presented to anticipate the pressure and impulses in different shock tubes.     

(K0.45Na0.55)0.98Li0.02Nb0.77Ta0.18Sb0.05O3-Co0.85Cu0.15Fe2O4复合陶瓷的磁电性能研究

以压电体(K0.45Na0.55)0.98Li0.02Nb0.77Ta0.18Sb0.05O3和压磁体Co0.85Cu0.15Fe2O4为原料,通过传统的固相反应法制备了(1-x)[(K0.45Na0.55)0.98Li0.02Nb0.77Ta0.18Sb0.05O3]-xCo0.85Cu0.15Fe2O4多铁性复合陶瓷,并使用X射线衍射仪、扫描电子显微镜、压电测试仪、铁电测试仪和磁电耦合测试仪对物相、显微结构、压电、铁电、磁电耦合性能进行了分析。结果表明,复合陶瓷的相结构保持为(K0.45Na0.55)0.98Li0.02Nb0.77Ta0.18Sb0.05O3和Co0.85Cu0.15Fe2O4两种物相,但两者之间发生了轻微的化学反应。随着Co0.85Cu0.15Fe2O4压磁相含量的增加,复合陶瓷的压电系数从56pC/N减小到21pC/N,剩余极化强度略有降低。在压磁相含量为0.2时可获得4.3mV·cm-1·Oe-1的最佳磁电耦合系数。     

K_2CO_3添加对提高Si/C负极电化学性能的作用

本文研究了Si/C锂离子电池负极材料中K_2CO_3的添加对提高电极电化学性能的作用及其作用机理。采用恒流充放电测试和电化学阻抗谱(EIS)研究了不同K_2CO_3添加量对Si/C负极电化学性能的影响;通过扫描电镜(SEM)和傅里叶红外光谱(FTIR)等方法分析了K_2CO_3添加对Si/C负极在循环过程中结构和成分变化的影响。研究结果表明,加入K_2CO_3后,由于电极在循环过程中结构稳定性增强以及电极的固体电解质界面(SEI)膜阻抗和电荷转移阻抗减少,使Si/C负极的循环稳定性和倍率性能得到明显提高。     

基于AR模型和ZMNL变换的K分布海杂波仿真方法

海杂波统计模型的研究对最优检测算法设计和雷达性能预估有重要作用。文章介绍了一种基于AR模型和ZMNL变换的K分布海杂波仿真方法,结合ACI准则和Yule-Walker方程,利用Levinson-Durbin递推关系式求解AR模型的阶数和参数,将生成的高斯序列通过线性滤波器产生服从K分布的相关序列。仿真结果表明,无论是功率谱还是概率分布都与理想分布相吻合。     

基于后验概率制导的B-KNN文本分类方法

针对K最近邻(KNN)方法分类准确率高但分类效率较低的特点,提出基于后验概率制导的贝叶斯K最近邻(B-KNN)方法。利用测试文本的后验概率信息对训练集多路静态搜索树进行剪枝,在被压缩的候选类型空间内查找样本的K个最近邻,从而在保证分类准确率的同时提高KNN方法的效率。实验结果表明,与KNN相比,B-KNN的性能有较大提升,更适用于具有较深层次类型空间的文本分类应用。     

On the convective nature of the instability of a front undergoing a supercritical Turing bifurcation

Fronts are traveling waves in spatially extended systems that connect two different spatially homogeneous rest states. If the rest state behind the front undergoes a supercritical Turing instability, then the front will also destabilize. On the linear level, however, the front will be only convectively unstable since perturbations will be pushed away from the front as it propagates. In other words, perturbations may grow but they can do so only behind the front. It is of interest to show that this behavior carries over to the full nonlinear system. It has been successfully done in a case study by Ghazaryan and Sandstede [A. Ghazaryan, B. Sandstede, Nonlinear convective instability of Turing-unstable fronts near onset: a case study, SIAM J. Appl. Dyn. Syst. 6 (2007) 319–347]. In the present paper, analogous results are obtained for the same system as in Ghazaryan and Sandstede (2007), but for a different parameter regime.     

一款模拟昆虫飞行方式的微小型扑翼机

设计了一款模拟昆虫飞行方式的微小型扑翼机,仿照蜻蜓的两翼,直升机式尾翼,以STC15F2K60S2为主控芯片,应用主流无线模块来完成实现遥控仿生扑翼机的设计与制作,经过实际测试能够满足飞行要求.     

基于RSKNN分类改进算法

RSKNN算法是K近邻算法的一种改进算法,该算法基于变精度粗糙集理论,能在保证一定分类精度的前提下,有效地降低分类样本的计算量,并且提高计算效率和分类精度．由于RSKNN算法对属性的依赖度较高,在分类时容易受到伪近邻的影响,导致RSKNN算法的分类精度受到一定程度的影响．针对存在问题,本文提出一种新颖的基于RSKNN算法的改进算法SMwRSKNN,该算法在RSKNN算法的基础上引入类别子空间的思想,以降低冗余属性和伪近邻对分类的影响．在UCI公共数据集上的实验结果表明,SMwRSKNN算法比RSKNN算法具有更高的分类精度．     

Spatial queueing for analysis, design and dimensioning of Picocell networks with mobile users

In this work, we characterize the performance of Picocell networks in the presence of moving users. We model various traffic types between base-stations and mobiles as different types of queues. We derive explicit expressions for expected waiting time, service time and drop/block probabilities for both fixed as well as random velocity of mobiles. We obtain (approximate) closed form expressions for optimal cell size when the velocity variations of the mobiles is small for both non-elastic as well as elastic traffic. We conclude from the study that, if the expected call duration is long enough, the optimal cell size depends mainly on the velocity profile of the mobiles, its mean and variance. It is independent of the traffic type or duration of the calls. Further, for any fixed power of transmission, there exists a maximum velocity beyond which successful communication is not possible. This maximum possible velocity increases with the power of transmission. Also, for any given power, the optimal cell size increases when either the mean or the variance of the mobile velocity increases.