Reactively sputtered MoO3 films for ammonia sensing

We report the gas-sensing properties of ion-beam sputter deposited MoO₃ thin-films. The change in the DC conductivity was measured in dry N₂ with 10% O₂ in the presence of up to 490 ppm of NH₃, NO, NO₂, C₃H₆, CO and H₂. At ∼440 °C the film was found to be very sensitive to NH₃, with 490 ppm increasing the conductivity by approximately a factor of 70. This was approximately 17 times greater than the response to the other gases. The NH₃ response was strongly affected by the accompanying levels of O₂, NO₂ and H₂O. For example, changing the accompanying O₂ levels from 1% to 20% decreased the NH₃ response by approximately a factor of 20. Similarly, the presence of 100 ppm NO₂ (in 10% O₂) decreased the NH₃ response by approximately a factor of three, and 1% water vapor decreased it by more than a factor of two. The NH₃ response, however, was relatively unaffected by 100 ppm of accompanying NO, C₃H₆, CO or H₂. XPS measurements show that the increased conductivity in the presence of NH₃ was also accompanied by a partial reduction of the surface MoO₃. We observed an increase in the resistance of the films after extended time at elevated temperatures.     

浅谈移动通信基站天线系统设计

对基站天线的基本原理、天线选型、天线参数设置、天线安装等方面进行了描述，对天线下倾角、分集距离等进行了重点讨论。     

川东北三叠系飞仙关组鲕滩气藏有利储集层的形成与分布

川东北地区三叠系飞仙关组鲕滩气藏是近年四川盆地碳酸盐岩天然气勘探取得重大突破的领域，目前在中国石油探区内已发现罗家寨、渡口河、铁山坡等大中型气藏。对鲕滩气藏白云岩储集层进行岩心观察、显微薄片分析，并进行微量元素、流体包裹体、X衍射、阴极发光及电子探针等分析，结果表明，白云岩化和多期溶蚀是形成优质白云岩储集层的关键因素，混合云化与埋藏云化的叠加作用是形成孔隙性白云岩储集层的基本条件。飞仙关组鲕滩气藏储集层经历了4期溶蚀作用，即同生期溶蚀作用、浅埋期溶蚀作用、深埋期溶蚀作用和抬升期溶蚀作用，形成优质白云岩储集层的主要溶蚀作用是浅埋期和深埋期的溶蚀作用。优质白云岩储集层主要分布在台缘鲕粒滩相带，纵向与亮晶鲕粒灰岩呈韵律性互层，横向主要分布在鲕粒滩坝靠近漏湖-潮坪一侧。     

一种新型均速管流量计在高炉煤气测量中的应用

高炉煤气具有管径大、流速低、粉尘大、易堵塞等特点，其流量用常规装置测量效果不尽理想。近来，一种新型均速管流量计——威力巴流量计采用独特的结构设计，在高炉煤气流量测量中取得了不少进展。本文对威力巴流量计的基本原理和应用于高炉煤气测量的突出优点进行了分析，并给出了安装使用时的一些建议。     

榆林气田气井废弃条件的确定

榆林气田是典型的低渗透气田，要准确计算其采收率和可采储量，必需确定气井的废弃条件。传统方法对气井的废弃地层压力进行计算时，由于忽视了开发过程中产能方程的变化，造成计算结果存在一定的误差。根据气井废弃地层压力的相关理论和计算方法，考虑了对气井产能方程影响较大的参数的变化，结合榆林气田气井矿场实际，推导出了适合榆林气田计算气井任意时刻二项式方程系数的公式，进而得到气井废弃时的稳定二项式方程。根据垂直管流法计算得到废弃井底流压，从而得到可靠的气井废弃地层压力，再结合经济评价即可确定气井的废弃产量。实例计算表明，新方法实用、有效，更切合气田实际。     

α-Fe_2O_3(SO_4~(2-),Sn)气敏电阻的温度响应特性

在气敏温度区域内研究了α-Fe_2O_3(SO_4~(2-),Sn)材料的电阻-温度特性,认为表面结构的变化导致温度特性出现峰值并呈现气敏性。可利用空气中电阻温度特性提供的信息改性或发现新的气敏材料。     

2~#加压站煤气热值检测及控制

本文叙述了马钢引进美国ＦＬＵＩＤ　ＤＡＴＡ公司的热值仪与计算机控制系统，有效地解决了煤气混合加压生产中热值的检测与控制问题。     

��Ȼ����Һ���÷����̽

求文针对我国天然气凝液如何利用问题,结合新技术进展,进行了初步探讨,认为原料较多的场合,应以催化脱氢或芳构化作为当前的主要加工方向。对原料较少的场合,也提出一些看法。     

Microstructural changes accompanying repair welding in 5xxx aluminium alloys and their effect on the mechanical properties

At the shipyards, the aluminium alloy 5083 is welded with a multi-pass sequence using the metal inert gas technique. If, while checking the weld integrity either after welding or during service, defects are detected in the vicinity of the weldment, repairs are usually employed to extend the service life.

The repair method involves removal of the upper passes, depending on the thickness and re-welding under the same conditions.

Purpose of this paper is to examine the microstructural changes accompanying repair welding, define their effect on properties of primary importance and set, if possible, an upper limit as far as the number of repairs is concerned.