大型连杆流线简易试验方法

介绍了一种大型连杆流线的简易试验方法及其评价原则。该方法可清晰显示流线，并适合任何尺寸和形状的锻造连杆的流线试验。     

Estimation and Optimization of the Principal H-Maser Parameters

The scale along the coordinate axes in the equations of motion hitherto used for an H-maser (in relative units) is shown to depend on Q as the quality factor for an H-maser. This hinders both analysis of the operation of the H-maser and optimization of its parameters. The modified equations of motion proposed here do not have that shortcoming. We determine the atomic flux into the bulb that gives the H-maser the best metrological characteristics.     

Failure analysis of a broken tooth

Several days after heart surgery, a patient discovered his upper right canine tooth had broken at the root. Such tooth damage, recognized post-operatively, is usually assumed to be caused by blunt mechanical force from an instrument used by the anesthesiologist during placement of a breathing tube at the start of surgery. In this case, the patient had saved the crown portion of the broken tooth, and it was possible to examine the root fracture characteristics. The curvature and direction of the crack path and natural tooth situation suggested that failure could be described through a cantilever beam model. This was confirmed when a whole extracted sample tooth was embedded and broken by a measured force in a manner consistent with the model. The resulting fracture surface matched that of the patient’s broken canine tooth. However, the high load and force direction necessary to fracture the root was inconsistent with forces applied during the anesthesia procedure. The failure analysis and further investigation indicated tooth clenching on the breathing tube during recovery was the likely cause of fracture. This paper presents an alternate explanation for intubation-related dental injury, demonstrates the practicality of fractographic analysis of biological materials, and introduces a methodology for simulating in vitro tooth settings for mechanical testing.     

基于WVD的防空雷达直升机信号特征分析

基于直升机目标旋转部件的调制模型，本文针对防空雷达提出了分析直升机信号特征的一种新方法——WVD法，并对直升机目标旋转部件调制回波信号在不同噪声情况下加以仿真分析，结果表明：用WVD分析雷达回波中直升机信号特征是一种非常有效的方法。     

Dissolved organic carbon dynamics in the upper rhone: The influence of side-arms?

Dissolved organic carbon (DOC) dynamics were investigated over a two year period in the Upper Rhǒne River to examine the role of side-arms in providing DOC to the main channel in relation to discharge fluctuations, especially floods. Concentrations of DOC are shown to remain low in space and in time (average 1.5 mg ^?1) and to be more related to global hydrological events (precipitation) than to any local flushing for backwaters during floods. The results do not support the general assumption that side-arms are the providers of DOC to the main channel.     

Test Case Generation as an AI Planning Problem

While Artificial Intelligence techniques have been applied to a variety of software engineering applications, the area of automated software testing remains largely unexplored. Yet, test cases for certain types of systems (e.g., those with command language interfaces and transaction based systems) are similar to plans. We have exploited this similarity by constructing an automated test case generator with an AI planning system at its core. We compared the functionality and output of two systems, one based on Software Engineering techniques and the other on planning, for a real application: the StorageTek robot tape library command language. From this, we showed that AI planning is a viable technique for test case generation and that the two approaches are complementary in their capabilities.     

On a large-gain theorem

The aim of this paper is to give a general quantitative requirement which the loop gain must satisfy in order to stabilize a given unstable (possibly nonlinear and time-varying) plant, namely that the gain must exceed one.     

单片机仿真系统

本文讨论单片机离线仿真系统的设计方法，其关键技术是：单片机硬件系统（ＲＡＭＲＥＧＩＳＴＥＲＳ）仿真，指令系统仿真，中断系统仿真，应用系统硬件仿真。     

EISA系统总经与VESA局部总线

本文主要介绍ＥＩＳＡ系统总线与ＶＥＳＡ局部总线的特点与区别．     

A formal description of open distributed processing (ODP) trading based on guidelines for the definition of managed objects (GDMO)

New requirements of growing computer networks and information systems have an influence on extended client/server models with increased functionality. This forms the basis for service management in distributed systems which is realized by a service trading concept. This paper studies the requirements derived from the Open Distributed Processing (ODP) Reference Model in order to consider an open service market. Furthermore, it examines management possibilities for describing the service trading scenario. Because of similar architectures and properties ODP services, service offers, types, exporters and traders are mapped onto management components and modeled as managed objects. Therefore, the Guidelines for the Definition of Managed Objects (GDMO) are used. The final concept allows a precise and unambiguous study of the service trading scenario and provides means for exporting and importing of service offers in a distributed environment.