非均匀介质中的场与波：理论及其在电测井中的应用

本文综述了非均匀介质中场与波理论近年来的研究进展及其应用成果，着重介绍了非均匀介质中的电磁场正演分析和反演计算中的各种高效数值方法，以及它们在电法测井数值模拟和成象研究中的成功应用。     

The effect of liquid push out of the material capillaries under sulfate ion diffusion in cement composites

The paper treats complex phenomena that accompany the diffusion of sulfate ions into cement paste or systems. The ion distribution within the material was studied by designing a specific diffusion model. The model accounts for two phenomena: capillary filling with products of the chemical reactions and the subsequent liquid push out of the capillary. The approach allows to quantify the concentration of free ions having penetrated the cement stone and that of chemically reacted ions, and to assess the liquid push out. Experimental data are also presented.     

曲率圆弧段代替切线段的数值计算方法

为了确保安全,核工业和其它一些工业要求某些参数的计算值只能取正的相对误差且不大于5×10-3,这是它们对数值计算的基本要求.例如,反应堆带功率运行时,功率增长总是随时间上升,功率曲线是向下凹的.传统的龙格-库塔法计算值总是小于真实值,并且随着时间的增加,计算值越来越小于真实值.按计算值分析,反应堆是安全的,但实际上反应堆是不安全的.这对反应堆的安全极为不利.为此,本文开拓了一个全新的数值计算方法.与龙格-库塔法相比,该方法计算工作量小,与预测一校正法相比,该方法没有启动问题.更值得指出的是计算值高于真实值,这样,反应堆计算结果总是偏于安全的.     

Silicon power MOSFET at low temperatures: A two-dimensional computer simulation study

Understanding how the structure of the unit-cell affects the cryogenic performance of a Si power Metal Oxide Semiconductor Field Effect Transistor (MOSFET) is an important step toward optimizing of the device for cryogenic operations. In this paper, numerical simulations of the Si power Double Diffused MOSFET’ (DMOS) are performed at room temperature and cryogenic temperatures. Physically based models for temperature dependent silicon properties are employed in the simulations. The performances of power DMOS’ with various unit-cell structures are compared at both room temperature and low temperatures. The effect of the cell structure on the on-resistance and breakdown voltage of the device are analyzed. The simulation results suggest that the device optimized for room temperature operation can be further optimized at cryogenic temperatures.     

低压铸造流动与传热耦合计算的研究

根据低压铸造充型流动的特点 ,利用计算机数值模拟技术 ,对低压铸造充型阶段的流动怀传热过程进行了耦合计算 ,从而保证了模拟结果的准确性和可靠性。在此基础上开发出了模拟软件 ,并对实际低压铸件进行了模拟分析 ,结果与实际生产情况吻合很好     

改进的用于半导体器件综合系统的遗传算法

本文对应用于器件综合系统的遗传算法GENOCOP进行了改进.将实数设计空间根据参数的工艺精度影响转换为整型空间,并加入适应性复合算子利用已经得到的点来扩展和开发准可行空间.使其保持有效搜索到可行解的特性的同时,在同等的算法设置下,提高了对可行空间的覆盖率(约2.87倍),可以帮助设计人员更有效的设计可工作的器件.     

Calculation of fatigue limits of case-hardened specimens with consideration of mean stresses and residual stresses

 The strength of case-hardened parts under cyclic loading can be determined in an experimental manner, but this can produce a large amount of costs due to the expenditure of material and testing time. Therefore, a calculation method is developed, that strongly reduces the number of experiments. The presented model is based on Weibull's weakest-link concept and allows to compute the survival probability of a case-hardened part which is loaded close to the fatigue limit. The essential quantities in this model are the distribution of Vicker's hardness of the material, the exponents of the Weibull distribution of the volume and the surface, the residual stress state, the surface roughness and the surface oxidation depth. By integrating the survival probabilities of the surface and the volume, the survival probability of the entire specimen or part can be calculated, which allows to compute the fatigue limit. The necessary parameters have to be determined from reference specimens. The model is successfully examined by comparing experimental and calculated results of smooth and notched case-hardened specimens under alternating torsion, rotating bending, repeated tension and tension-compression. Received 20 August 2001 / Accepted 11 November 2001     

Prediction of cracking within early-age concrete due to thermal, drying and creep behavior

To predict potential early-age cracking after concrete placing, a numerical simulation procedure has been completed based on a micromechanical model and empirical formulas on the property development of young concrete. The numerical model could account for the effects of hydration, moisture transport and creep. Environmental influences, such as removal of formworks, curing conditions and variations of surrounding temperature and relative humidity, have been investigated. In calculating stress field with age caused by these synthetic physical-mechanical processes, three-dimensional finite element and finite difference (3D-FE-FD) methods are combined together.     

程潮铁矿大断面采准巷道稳定性数值模拟研究

针对武钢程潮铁矿采准巷道净断面尺寸增大，巷道稳定性下降的状况，采用数值计算方法对程潮铁矿巷道支护方案进行优化计算，并给出合理的支护方案。     

蚕庄金矿倾斜采场的地压研究

本文使用工程地质、室内试验及数值分析的方法对蚕庄金矿的倾斜矿房的地压活动规律进行了研究，得出了一些有价值的结论。