Spatial and temporal variability in lake trout diets in Lake Ontario as revealed by stomach contents and stable isotopes

Lake trout (Salvelinus namaycush) are an ecologically and economically important piscivore with reported differences in diet and feeding behaviour throughout its range. Eleven stomach content and stable isotope-based metrics were used to describe diets of 349 lake trout between two years (2013 and 2018) and among geographic zones (west, central, east, Kingston basin) in Lake Ontario. Using individual (e.g., volumetric, %V) and aggregate (e.g., index of relative importance, %IRI) diet metrics, we found an overwhelming dominance of alewife (Alosa pseudoharengus) in lake trout diets among some zones in 2013 (%V = 23.3 – 92.7; %IRI = 12.2 – 99.5) and all zones in 2018 (%V = 83.9 – 96.7; %IRI = 96.5 – 100). Round goby (Neogobius melanostomus) and rainbow smelt (Osmerus mordax) were secondary lake trout prey items with relative diet percentages only marginally reflected by spatial and temporal variation in prey abundance (round goby: %V = 1.0 – 33.3, %IRI = 0.1 – 13.2; rainbow smelt: %V = 2.5 – 54.0, %IRI = 0.1 – 54.0). Carbon (δ¹³C) and nitrogen (δ¹⁵N) isotopic niche areas and orientations were similar across all year-zone combinations reinforcing temporal and spatial consistency in lake trout diet. The findings of this study advance the time series in describing Lake Ontario lake trout diets and can be used to complement stock assessments and management decisions associated with carrying capacity for the diverse salmonid community.     

电活性分子L-B膜修饰CdSe薄膜电极的光电化学研究

用电活性分子——硬脂酸二茂铁酯L-B膜修饰了薄膜CdSe电极,在单色光650nm光照下用循环伏安法研究修饰的薄膜电极的光电化学性能。研究结果指出经多层L-B膜修饰后,薄膜CdSe电极的,I-V性能和光稳定性都有明显改善。用界面能级关系讨论了硬脂酸二茂铁酯L-B膜在光照的CdSe薄膜/Fe(CN)_6~(4-)溶液界面起传递电荷的中介作用,加速了界面的电荷转移。     

Controlling aliased dynamics in motion systems? An identification for sampled-data control approach

Sampled-data control systems occasionally exhibit aliased resonance phenomena within the control bandwidth. The aim of this paper is to investigate the aspect of these aliased dynamics with application to a high performance industrial nano-positioning machine. This necessitates a full sampled-data control design approach, since these aliased dynamics endanger both the at-sample performance and the intersample behaviour. The proposed framework comprises both system identification and sampled-data control. In particular, the sampled-data control objective necessitates models that encompass the intersample behaviour, i.e., ideally continuous time models. Application of the proposed approach on an industrial wafer stage system provides a thorough insight and new control design guidelines for controlling aliased dynamics.     

Reliability-based robust assessment for multiobjective optimization design of improving occupant restraint system performance

Optimal performance of vehicle occupant restraint system (ORS) requires an accurate assessment of occupant injury values including head, neck and chest responses, etc. To provide a feasible framework for incorporating occupant injury characteristics into the ORS design schemes, this paper presents a reliability-based robust approach for the development of the ORS. The uncertainties of design variables are addressed and the general formulations of reliable and robust design are given in the optimization process. The ORS optimization is a highly nonlinear and large scale problem. In order to save the computational cost, an optimal sampling strategy is applied to generate sample points at the stage of design of experiment (DOE). Further, to efficiently obtain a robust approximation, the support vector regression (SVR) is suggested to construct the surrogate model in the vehicle ORS design process. The multiobjective particle swarm optimization (MPSO) algorithm is used for obtaining the Pareto optimal set with emphasis on resolving conflicting requirements from some of the objectives and the Monte Carlo simulation (MCS) method is applied to perform the reliability and robustness analysis. The differences of three different Pareto fronts of the deterministic, reliable and robust multiobjective optimization designs are compared and analyzed in this study. Finally, the reliability-based robust optimization result is verified by using sled system test. The result shows that the proposed reliability-based robust optimization design is efficient in solving ORS design optimization problems.     

Imaging and probing catalytic surface reactions on the nanoscale: Field Ion Microscopy and atom-probe studies of O2–H2/Rh and NO–H2/Pt

We present dynamic studies of surface reactions using video-Field Ion Microscopy (FIM) along with Pulsed Field Desorption Mass Spectrometry (PFDMS). Catalytic water formation is followed using rhodium and platinum 3D field emitter crystals for the oxidation of hydrogen with either oxygen (Rh) or NO (Pt). Strongly non-linear dynamics are observed with nanoscale spacial resolution. For both reactions quasi-oscillatory behaviour exists under certain conditions of temperatures and partial pressures. An influence of the probing electric field is observed and possibly essential in establishing oscillatory behaviour. Local chemical probing of selected surface areas with up to 400 atomic surface sites proves catalytic water formation to take place. Since water ions (H₂O⁺/H₃O⁺) cause image formation of the O₂–H₂ reaction on Rh, respective videos provide space-time resolved information on the catalytically active sites. Atom-probe data also reveal that the surface of the Rh sample reversibly switches from a metallic to an oxidized state during oscillations. As to the NO–H₂ reaction on Pt, fast ignition phenomena are observed to precede wave fronts. After catalytic water formation, NO molecules diffuse into emptied areas and cause high image brightness. Depending on the size of the Pt crystal, the reaction may ignite in planes or kinked ledges along the <100> zone lines. Thus FIM provides clear experimental evidence that kinks are more reactive than steps in the catalytic NO + H₂ reaction. Pt surface oxidation occurs and has probably been underestimated in previous FIM studies.     

Variation in relative quantities of airborne sex pheromone components from individual femaleEphestia cautella (Lepidoptera: Pyralidae)

The airborne sex pheromone components (Z,E)-9,12-tetradeca-dien-1-yl acetate and (Z)-9-tetradecen-1-y1 acetate from single calling females ofEphestia cautella (Walker) were trapped within glass capillary tubes and were measured by gas chromatography-mass spectrometry. Broad and similar distributions of relative quantities were found for a laboratory strain and three Australian field strains, and means differed strongly from those reported previously for this species. The overall mean proportion of the two components found for Australian females was 8812. The composition in individuals ranged from 6327 to 973. The proportions for individuals appeared to vary slightly in a random fashion from day to day, and proportions for first-generation progeny were influenced by the maternal blend.Author order in this paper is alphabetical     

Crystallization,morphology, structure and thermal behaviour of nylon-6/rubber blends

An experimental study was carried out in order to investigate the morphological, kinetic, structural and thermodynamic properties of nylon-6/rubber (namely ethylene-propylene copolymer (EPM) and ethylene-propylene copolymer functionalized by inserting along its backbone succinic anhydride groups (EPM-g-SA)) blends. The morphology and the overall kinetics of crystallization of the blends strongly depend on the type of copolymer added to nylon and on the blend composition. The EPM-g-SA acts as a nucleating agent for the Ny spherulites and at the same time causes a drastic depression of the overall kinetic rate constant. This decrease is related to the increase of the melt viscosity observed in Ny/EPM-g-SA blends. The crystalline lamella thickness of the Ny phase in the blends is lower than that of pure Ny crystallized at the same T_c suggesting that the presence in the melt of an elastomeric phase disturbs the growth of the Ny crystals. The rubber does not influence the thermal behaviour of the nylon. The results found lead to the conclusion that in the melt nylon-6 is incompatible with both EPM and EPM-g-SA copolymers.     

含多羟基功能基树脂的合成及其与硼酸螯合性能的研究

合成了数种含有多羟基醇单醚功能基的树脂，研究了反应条件及树脂的吸附性能。     

DSC and TMDSC study of melting behaviour of poly(butylene succinate) and poly(ethylene succinate)

The subsequent melting behaviour of poly(butylene succinate) (PBSU) and poly(ethylene succinate) (PES) was investigated using DSC and temperature modulated DSC (TMDSC) after they finished nonisothermal crystallization from the melt. PBSU exhibited two melting endotherms in the DSC traces upon heating to the melt, which was ascribed to the melting and recrystallization mechanism. However, one melting endotherm with one shoulder and one crystallization exotherm just prior to the melting endotherm were found for PES. The crystallization exotherm was ascribed to the recrystallization of the melt of the crystallites with low thermal stability, and the shoulder was considered to be the melting endotherm of the crystallites with high thermal stability. The final melting endotherm was ascribed to the melting of the crystallites formed through the reorganization of the crystallites with high thermal stability during the DSC heating process. TMDSC experiments gave the direct evidences to support the proposed models to explain the melting behaviour of PBSU and PES crystallized nonisothermally from the melt.     

用CCD摄像法测量下喷环流反应器内的气泡行为

本文开发了一种集高速视频分析系统和计算机数字图像处理技术于一体的具有普适性的动态高速ＣＣＤ摄像系统，并利用该系统测定了两相三维下喷环流反应气内的环境气泡行为，考察了不同喷咀和操作条件对气泡行为及平均传质比表面积的影响。